Re: [SR-Users] Dispatcher Confusion (v3.2.0)

Hi Daniel, Thanks for the clarrification, On 25/10/2011 16:30, Daniel-Constantin Mierla wrote: Above is the part that is a little misleading, it says that "When an address is marked as inactive or probing, it will be ignored by 'ds_select_dst' and 'ds_select_domain'." This, to me, means that if a gateway is in probing mode (Active-Probing) then it wont be selected in the destination set because it is in probing mode, if this is not the case then maybe the above line should read: "When an address is marked as inactive or inactive-probing, it will be ignored by 'ds_select_dst' and 'ds_select_domain'." This brings me to my next question then, how would I set the state of a destination to Inactive-Probing (state: IP) from the routing script. The ds_mark_dst() function only allows one of "a", "i", "p". If I do a ds_mark_dst("i"), then the state changes to "IX", Inactive with no probing to tell when gateway is back up. If I do a ds_mark_dst("i") and then right after ds_mark_dst("p"), a log is printed saying that you cannot put a destination into probing state when it is marked as inactive.

Is it possible to set the state of a gateway to inactive-probing from the routing script?

Thanks _______________________________________________ SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list sr-users(a)lists.sip-router.org http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users