5 Jul
2006
5 Jul
'06
8:51 p.m.
You only need to set the flag once for each message type.
g-)
ravi reddy wrote:
Thank you Mr.GREGER V. Teigre
yesterday i tried in almost all places by keeping the
flags at last i found two places one in loose route and another before
loose route section but for both
methods iam getting another problem :- that is in radius database in
radacct table iam getting two entries for single call it show like
this -->
-------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
radaccid| username | AcctstartTime |
AcctStopTime | calledstationid |
AcctSessionTime|
-------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
| 20 | 32331001(a)81.21.34.37 <mailto:32331001@81.21.34.37> |
2006-07-05 10:44:09 | 2006-07-05 10:45:24 | sip:22223333@81.21.34.37
<mailto:sip:22223333@81.21.34.37> | 0 |
| 21 | 32331001(a)81.21.34.37 <mailto:32331001@81.21.34.37> |
2006-07-05 10:44:09 | 2006-07-05 10:45:24 | sip:22223333@81.21.34.37
<mailto:sip:22223333@81.21.34.37> | 0 |
-___________________________________________________________________________________________
so this is the problem i have had now how can i get only a single
radacctid for a single call
please help me Thanks in Advance
Regards
Ravi.
On 7/5/06, *Greger V. Teigre* <greger(a)teigre.com
<mailto:greger@teigre.com>> wrote:
You probably haven't set the accounting flag in your loose_route
handling. Do a test pretty early in your ser.cfg main route
(before if(loose_route()) and set the appropriate flags.
g-)
ravi reddy wrote:
Thanks For your Response Mr. *Greger V.
Teigre
I did* it ,by checking the dictionaries by
seeing your messages in 2004 archives ,
but here i got a problem is that if i set "radius flag" in
ser.cfg near call invite then i am only getting AccStartTime
but not AccStop Time
If i set flags near (cancel or Bye) iam getting only account
stop time and the acct start time is not showing ,
if i set two places even then iam getting only one time
*+----------------------+---------------------+---------------------+--------------------------+--------------------------+
| username | acctstarttime |
acctstoptime | callingstationid |
calledstationid |
+----------------------+---------------------+---------------------+--------------------------+--------------------------+
| 32331001(a)81.21.34.37 <mailto:32331001@81.21.34.37> | 2006-07-04
18:45:50 | 2006-07-04 18:45:50 | sip:32331001@81.21.34.37
<mailto:sip:32331001@81.21.34.37> | sip:22223333@81.21.34.37
<mailto:sip:22223333@81.21.34.37> |
| 32331001(a)81.21.34.37 <mailto:32331001@81.21.34.37> | 2006-07-04
18:36:29 | 2006-07-04 18:36:29 | sip:32331001@81.21.34.37
<mailto:sip:32331001@81.21.34.37> | sip:22223333@81.21.34.37
<mailto:sip:22223333@81.21.34.37> |
| 32331001(a)81.21.34.37 <mailto:32331001@81.21.34.37> | 2006-07-04
18:17:35 | 2006-07-04 18:17:35 | sip:32331001@81.21.34.37
<mailto:sip:32331001@81.21.34.37> | sip:22223333@81.21.34.37
<mailto:sip:22223333@81.21.34.37> |
| 32331001(a)81.21.34.37 <mailto:32331001@81.21.34.37> | 2006-07-04
18:32:50 | 2006-07-04 18:32:50 | sip:32331001@81.21.34.37
<mailto:sip:32331001@81.21.34.37> | sip:22223333@81.21.34.37
<mailto:sip:22223333@81.21.34.37> |
+----------------------+---------------------+---------------------+--------------------------+--------------------------+
so how i can get out of this trouble please help me ;
Thank you
regards
Ravi.
*
On 7/4/06, *Greger V. Teigre* <greger(a)teigre.com
<mailto:greger@teigre.com>> wrote:
I suggest you figure out your dictionary first (ref. your
other post). Without the attributes in place, you get nowhere.
Remember that there are several elements to radius
functionality in SER:
- standalone radius server
- dictionary file for radius server
- SER radius modules compiled and linked against
radiusclient-ng (library)
- the radiusclient.conf file defining the setup for the
radius client (used by SER radius modules)
- dictionary file for radiusclient-ng
The attributes used are defined in SER modules. All
attributes must be found in the radiusclient.conf file (so
that the radiusclient can understand the attributes defined
in the modules).
Then the radiusserver needs to understand all the attributes
(using it's own dictionary).
It looks like this:
ser.cfg radiusauth or setflag (acc_flag) => calls radius
module => linked against radiusclient-ng.so => reads
radiusclient.conf and dictionary => sends requests on udp
1812 and 1813 => radius server listens on ports and handles
request responding back to radiusclent, which returns data
(or just ok) to the module
g-)
ravi reddy wrote:
Mr. Greger V.Teigre
Thanks for your response , when i tried changing line
as radius_log_flag the SER is showing there is no module
like Radius_log_flag in acc module but when i keep like
radius_flag its showing o.k
but here my doubt is are the accounting messages will log in
to radius???
my config file is accepting the radius_missed_flag...
is this setting will log the messages in radacct????
Are you using FreeRadius for accounting ???
waiting for your reply
Regards
Ravi.
On 7/4/06, *Greger V. Teigre* <greger(a)teigre.com
<mailto:greger@teigre.com> > wrote:
"To enable RADIUS accounting simply use radius_log_flag
and radius_log_missed_flag parameters instead of
log_flag and log_missed_flag. Mark transactions that
should be logged with flags configured in the parameters."
This means that you use modparam to set the flag values
for these two and then use setflag(yourflag) where you
want radius accounting to happen.
g-)
ravi reddy wrote:
Hi SER Users ,
I tried to install SER with basic
configurations and also with onsip config file with
these SER is working pretty good ,Now i want to test
accounting on radius server i installed Radius server
with sql module and it is listening on 1813 for
accounting , i am using radiusclient-ng-0.5.2 and i
append dictionary.ser to main dictionary file. every
thing is o.k
Now , how can I get the accounting
details in radius server is there any specific
configuration to do that ?
in ser.cfg i make some changes as shown in SER_RADIUS
HOW TO's but i dont understand the way to move
........... :-(
so any body can please tell me an out line scenario how
to send account packets to radius server so that i will
work on that ;
Thanks in Advance
Regards'
Ravi.
------------------------------------------------------------------------
_______________________________________________
Serusers mailing list
Serusers(a)lists.iptel.org <mailto:Serusers@lists.iptel.org>
http://lists.iptel.org/mailman/listinfo/serusers