8 Jul
2005
8 Jul
'05
10:43 p.m.
Hi Sebastian,
I haven't tried generating BYE messages with SIPSAK but I have successfully
generated them through the SER FIFO interface. I collected the data I
needed for the BYE message from the INVITE and ACK messages that setup the
call. I then used a Perl script to send the data to the SER FIFO which
generated the BYE message to the gateway to disconnect the call.
Regards
Stuart
-----Original Message-----
From: serusers-bounces(a)iptel.org [mailto:serusers-bounces@lists.iptel.org] On
Behalf Of Sebastian Kühner
Sent: 08 July 2005 15:20
To: serusers(a)lists.iptel.org
Subject: Re: **JUNK** Re: [Serusers] Simulate BYE Message
Hi,
I captured the BYE messages with ngrep now and tried to simulate it with
ser. I copied the BYE message (changing the sip_ip first) to the file
"bye.ser" and used following command:
sipsak -f bye.ser -s sip:192.168.1.222:5061 -i -vvv
...but only appear "*** timeout after xxx *** messages. Has anyone an idea
how I can use sipsak to send theese BYE messages to ser? My ser is running
on 192.168.1.222:5061.
Many thanks!
Seba
********************************************************
#more bye.ser
BYE sip:55@192.168.1.101:5060 SIP/2.0
Route: <sip:192.168.1.222:5061;ftag=603064a2;lr=on>
Via: SIP/2.0/UDP 192.168.1.101:5062;rport
From: "21" <sip:14@192.168.1.222:5061>;tag=603064a2
To: <sip:255@192.168.1.222:5061>;tag=65002344124
CSeq: 3 BYE
Call-ID: 1613784195-453a071e(a)192.168.1.101
Max-Forwards: 70
User-Agent: sipsak 0.8.13
Content-Length: 0
*********************************************************
----- Original Message -----
From: "Iqbal" <iqbal(a)gigo.co.uk>
To: <skuehner(a)veraza.com>om>; <serusers(a)lists.iptel.org>
Sent: Thursday, July 07, 2005 9:28 PM
Subject: **JUNK** Re: [Serusers] Simulate BYE Message
use ngrep and capture ur BYE message
Iqbal
On 7/7/2005, "Sebastian Kühner" <skuehner(a)veraza.com> wrote:
Hi all,
That doesn't work for me. The best would be a dump of the SIP messages
(within the BYE message).
Any idea?
Thanks
Sebastian
----- Original Message -----
From: "Paul Hazlett" <javarockx(a)gmail.com>
To: "Sebastian Kühner" <skuehner(a)veraza.com>
Cc: <serusers(a)lists.iptel.org>
Sent: Thursday, July 07, 2005 4:51 PM
Subject: Re: [Serusers] Simulate BYE Message
Try this link
http://www.onsip.org/modules/xoopsfaq/index.php?cat_id=3#q2
Regards,
Paul
On 7/7/05, Sebastian Kühner <skuehner(a)veraza.com> wrote:
_______________________________________________
Serusers mailing list
serusers(a)lists.iptel.org
http://lists.iptel.org/mailman/listinfo/serusers
Hello,
I'm trying to send out a SIP BYE Message with sipsak to make my phones
hanging up (to force them to hang up)...
I used a file that is called bye.ser and looks like this:
BYE sip:55@192.168.1.101:5060 SIP/2.0
Route: <sip:192.168.1.222:5061;lr>
From: sip:14@192.168.1.101:5062;user=phone
To: sip:55@192.168.1.101:5060;user=phone
Contact: sip:14@192.168.1.101:5062;user=phone
CSeq: 42759 BYE
Call-ID: 746707906-47a484e6(a)192.168.1.101
User-Agent: sipsak 0.8.13
Max-Forwards: 16
Allow: INVITE,ACK,CANCEL,BYE,NOTIFY,REFER,OPTIONS,INFO,SUBSCRIBE
Content-Length: 0
...using the command:
sipsak -f bye.ser -s sip:192.168.1.222:5061 -vvv
... but the message doesn't go out. My ser is running on
192.168.1.222:5061
Well, my question is: How can I capture the SIP messages that are going
through my ser?? Is there any debug option to do that? It would be easier
for me to simulate it after...
Many thanks!!
Sebastian
_______________________________________________
Serusers mailing list
serusers(a)lists.iptel.org
http://lists.iptel.org/mailman/listinfo/serusers
_______________________________________________
Serusers mailing list
serusers(a)lists.iptel.org
http://lists.iptel.org/mailman/listinfo/serusers