Re: [SR-Users] Wrong ACL to Provider kamailio+asterisk+uac

As a note for the mail archives - it should work if you just call it on the initial INVITE if the requests are routed properly through kamailio. The uac module will then use callbacks to rewrite replies and following in-dialog requests. Am 04.08.19 um 18:46 schrieb Henning Westerholt: Hello Zhan, you need to also execute it also for the ACK request. I just tested it on a test setup, I just placed it here for a quick test (refer to the default cfg): ... uac_replace_from("","sip:batman@gotham.org"<mailto:sip:batman@gotham.org>); uac_replace_to("","sip:robin@gotham.org"<mailto:sip:robin@gotham.org>); # handle requests within SIP dialogs route(WITHINDLG); ... Works just fine: 2019/08/04 18:43:21.727990 XXX.XXX.178.27:5060 -> XXX.XXX.167.107:5060 ACK sip:customer-2@XXX.XXX.64.8:5096;ob<mailto:sip:customer-2@XXX.XXX.64.8:5096;ob> SIP/2.0 Via: SIP/2.0/UDP XXX.XXX.178.27;branch=z9hG4bK8cfc.358f1178964b526f50452ba03db8ee3e.0 Via: SIP/2.0/UDP XXX.XXX.167.107;rport=5060;branch=z9hG4bK8cfc.85decb742f8d4df6ca0216d3065be210.0 v: SIP/2.0/UDP XXX.XXX.64.8:5095;received=XXX.XXX.64.8;rport=5095;branch=z9hG4bKPjpwl1uGwlM1NDPbYauTk6DazXWBA1yrzV Max-Forwards: 68 f: sip:batman@gotham.org;tag=TVDG0gI90HONs9GOc0dw7ykSYFgyWUWZ<mailto:sip:batman@gotham.org;tag=TVDG0gI90HONs9GOc0dw7ykSYFgyWUWZ> t: sip:robin@gotham.org;tag=ufPqkX.gDlvL.ammPR9QkQ6beeh4fbOL<mailto:sip:robin@gotham.org;tag=ufPqkX.gDlvL.ammPR9QkQ6beeh4fbOL> i: E3JNM13kkWFd8gCbt0EAvbGRow6zU8OX CSeq: 19753 ACK Route: <sip:XXX.XXX.167.107;lr> l: 0 Cheers, Henning Am 04.08.19 um 18:22 schrieb Zhan Bazarov: Hello, Thanks, I will try! Should I add this into the same route? I execute uac_replace into route[FROMASTERISK] if method is invite. вс, 4 авг. 2019 г. в 19:15, Henning Westerholt <hw@skalatan.de<mailto:hw@skalatan.de>>: Hello Zhan, I obvious don't know your cfg details. But I would try to just call the uac_replace_from/ .._to in the main request_route and see if it works at all in your routing logic. Also add some xlog messages to see that it is executed. You can also output with $rm the SIP request method, with $ru the request URI etc.. (see the cookbook for pseudo-variables for all that are available). Cheers, Henning Am 03.08.19 um 22:40 schrieb Zhan Bazarov: Hello, It didn’t make any sense, unfortunately... In additional - kamailio relay right 200 to Asterisk, and asterisk send ACK with wrong from/to(initial values like it was before uac_replace) and then kamailio doesn’t change it to right from/to values. Any idea, please. сб, 3 авг. 2019 г. в 19:17, Henning Westerholt <hw@skalatan.de<mailto:hw@skalatan.de>>: Hello Zhan, there is no need to execute a branch_route on an ACK. The ACK should be just routed "normally" through Kamailio. Have a look to the default cfg, for example. The ACK in a normal call setup is just a "normal" request. Cheers, Henning Am 02.08.19 um 19:27 schrieb Zhan Bazarov: Thanks! Rly appreciate your help! So, I can try to execute the same branch_route for ACK method? I have this branch route: branch_route[MODIFY]{ uac_replace_from("","$avp(from)"); uac_replace_to($avp(to)); } Now I execute this when request goes from asterisk through kamailio to carriers... Should I execute this branch route into ACK method from asterisk too? пт, 2 авг. 2019 г. в 20:11, Henning Westerholt <hw@skalatan.de<mailto:hw@skalatan.de>>: Hello Zhan, possible reasons: - the ACK is not routed through your proxy (missing record-route for the INVITE) - the user agent mangles the Route header, therefore the uac module can't does it work correctly (look to the kamailio error logs if you spot something) Have a look to your SIP e.g. with "ngrep -qt -d any -W byline port 5060" on your proxy. Cheers, Henning Am 02.08.19 um 19:02 schrieb Zhan Bazarov: Hello, Thanks for reply! Yes I execute uac_replace_to/from in branch_route in INVITE method... But it doesn't work for ACK method... пт, 2 авг. 2019 г. в 18:11, Henning Westerholt <hw@skalatan.de<mailto:hw@skalatan.de>>: Hello Zhan, have a look to the "uac" module, there are functions to rewrite the From and To header for passing messages. It works together with the rr module. Cheers, Henning Am 02.08.19 um 13:30 schrieb Zhan Bazarov: Hello! Please, is it possible to change from/to headers in ACK message to provider? this is exactly our case, please, look it when u get a chance. http://sip-router.1086192.n5.nabble.com/Wrong-ACK-to-Provider-td130050.html… _______________________________________________ Kamailio (SER) - Users Mailing List sr-users@lists.kamailio.org<mailto:sr-users@lists.kamailio.org> https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users -- Henning Westerholt - https://skalatan.de/blog/ Kamailio services - https://skalatan.de/services -- Henning Westerholt - https://skalatan.de/blog/ Kamailio services - https://skalatan.de/services -- Henning Westerholt - https://skalatan.de/blog/ Kamailio services - https://skalatan.de/services -- Henning Westerholt - https://skalatan.de/blog/ Kamailio services - https://skalatan.de/services -- Henning Westerholt - https://skalatan.de/blog/ Kamailio services - https://skalatan.de/services -- Henning Westerholt - https://skalatan.de/blog/ Kamailio services - https://skalatan.de/services