Re: [Serusers] Acc SetFlag issue

Hi

I would normally agree with you in this should be simple.

Tests show same result. when I make a call from one endpoint to another and the callee hangs up, only a single BYE is noted in the acc table. When the caller hangs up the call, I get three BYE messages in the acc table.

I checked for other setflag(1) and nothing is found.

Any idea's

_____

From: Greger V. Teigre [mailto:greger@teigre.com] Sent: Tuesday, 7 June 2005 4:00 PM To: Mr Greg Plater; serusers@lists.iptel.org Subject: Re: [Serusers] Acc SetFlag issue

This is a fairly straight-forward way to do it: if (method=="INVITE" || method=="BYE" || method=="ACK") { setflag(1); }; Put it at the top after sanity checks, but before loose routing etc. g-)

---- Original Message ---- From: Mr Greg Plater To: serusers@lists.iptel.org Sent: Monday, June 06, 2005 11:41 PM Subject: [Serusers] Acc SetFlag issue

When I have setflag in this location a call logs three times.

Were should I place the setflag if I wish for all calls to log in acc with mysql?

Ser.cfg Snip:

modparam("acc", "db_url", "mysql://ser:heslo@localhost/ser") modparam("acc", "log_level", 1) modparam("acc", "log_flag", 1) modparam("acc", "log_fmt", "cdfimorstup") modparam("acc", "db_flag", 1) modparam("acc", "log_missed_flag", 2) modparam("acc", "db_missed_flag", 2) modparam("acc", "report_cancels", 1)

# ----------------------------------------------------------------- # Loose Route Section #

---

#setflag(1);

if (loose_route()) {

    if (has_totag() && (method=="INVITE" || method=="ACK")) {

        if (client_nat_test("3")||search("^Route:.*;nat=yes")){
            setflag(6);
            use_media_proxy();
        };
    };

    route(1);
    break;
};

---

Serusers mailing list serusers@lists.iptel.org http://lists.iptel.org/mailman/listinfo/serusers