[OpenSER-Users] Re: Openser-Perl module in onreply_route

Hi Mik, When I faced these problems with openser and DBI, I did a research, and if I remember it correctly, DBD::Sybase does not work correctly with output parameters. So one solution I guess would be you rewrite your procedure so that the parameter is only input and return the same parameter in a result set inside the procedure. That was one thing I had to do when I switched from DBD::ODBC to DBD::Sybase, as I had also some procedures with output parameters. After I rewrote the procedures and returned the output parameters as result sets I had no problems with this. HTH, Murilo -----Original Message----- From: users-bounces(a)openser.org [mailto:users-bounces@openser.org] On Behalf Of users-request(a)openser.org Sent: segunda-feira, 15 de outubro de 2007 08:04 To: users(a)openser.org Subject: Users Digest, Vol 29, Issue 47 Send Users mailing list submissions to users(a)openser.org To subscribe or unsubscribe via the World Wide Web, visit http://openser.org/cgi-bin/mailman/listinfo/users or, via email, send a message with subject or body 'help' to users-request(a)openser.org You can reach the person managing the list at users-owner(a)openser.org When replying, please edit your Subject line so it is more specific than "Re: Contents of Users digest..." Today's Topics: 1. Re: Multidomain and in-dialog REFER auth issue (I?aki Baz Castillo) 2. Changing db table names (Dan-Cristian Bogos) 3. Re: Openser-Perl module in onreply_route (Bastian Friedrich) 4. Re: t_relay(), forward() and send(): retransmissions? (samuel) 5. Re: t_relay(), forward() and send(): retransmissions? (I?aki Baz Castillo) 6. Re: t_relay(), forward() and send(): retransmissions? (Klaus Darilion) 7. Re: Multidomain and in-dialog REFER auth issue (Klaus Darilion) 8. Re: Multidomain and in-dialog REFER auth issue (Klaus Darilion) 9. Re: Multidomain and in-dialog REFER auth issue (I?aki Baz Castillo) 10. Re: Multidomain and in-dialog REFER auth issue (I?aki Baz Castillo) 11. Re: Multidomain and in-dialog REFER auth issue (I?aki Baz Castillo) 12. change status code in reply (Cseke Tamas) ---------------------------------------------------------------------- Message: 1 Date: Mon, 15 Oct 2007 10:13:22 +0200 From: I?aki Baz Castillo <ibc(a)in.ilimit.es> Subject: Re: [OpenSER-Users] Multidomain and in-dialog REFER auth issue To: users(a)openser.org Message-ID: <200710151013.22807.ibc(a)in.ilimit.es> Content-Type: text/plain; charset="iso-8859-1" El Monday 15 October 2007 09:58:36 Iñaki Baz Castillo escribió: Anyway this solution wouldn't be secure since userA(a)domainA.com could hack its "From" header in the REFER and appears as "(a)domainB.com".com". So I think I need to store dialog info in a table (in the 200-OK), with those info: - "From" header domain - RURI domain - fromtag - totag - "Call-ID" header and query this table in REFER amtching fromtag, totag and Call-ID, and just allow the REFER is "From" header and RURI domain are the same. "Dialog" module is not valid for me since it doesn't store RURI. Any suggestion about it? Thanks a lot. -- Iñaki Baz Castillo ibc(a)in.ilimit.es ------------------------------ Message: 2 Date: Mon, 15 Oct 2007 10:15:31 +0200 From: "Dan-Cristian Bogos" <dan.bogos(a)gmail.com> Subject: [OpenSER-Users] Changing db table names To: "users openser.org" <users(a)openser.org> Message-ID: <40e285320710150115k78aa907co56a4a7a1748bbfc2(a)mail.gmail.com> Content-Type: text/plain; charset=ISO-8859-1 Hi All, I came to a situation where I need to use openser together with other apps on the same database, therefore I will need to change the table names. I know that most of the modules permit that on through config, but my concern is the table version, and the data which should be inside. Can anybody give me any hints on this issue? Ta, DanB ------------------------------ Message: 3 Date: Mon, 15 Oct 2007 10:19:20 +0200 From: Bastian Friedrich <bastian.friedrich(a)collax.com> Subject: Re: [OpenSER-Users] Openser-Perl module in onreply_route To: users(a)openser.org Message-ID: <200710151019.21008.bastian.friedrich(a)collax.com> Content-Type: text/plain; charset="iso-8859-1" Hi Mik, On Friday 12 October 2007, Mik Cheez wrote: a few weeks ago, someone else experienced problems when using DBI in OpenSER Perl scripts: http://openser.org/pipermail/users/2007-September/013388.html We currently do not have a proper solution for the problem, as the problems are created by DBI rather than by OpenSER. You might consider trying to establish some kind of OpenSER-internal locking mechanism for the DBI functions. Have you tried running your Perl script with only a single OpenSER instance (i.e. turning of forking)? Bastian -- Collax GmbH . Burkheimer Straße 3 . 79111 Freiburg . Germany p: +49 (0) 761-45684-24 f: +49 (0) 761-45684-10 www.collax.com Geschäftsführer: William K. Hite / Boris Nalbach AG München HRB 158898 . Ust.-IdNr: DE 814464942 \ Smash forehead on keyboard to continue. ------------------------------ Message: 4 Date: Mon, 15 Oct 2007 11:11:03 +0200 From: samuel <samu60(a)gmail.com> Subject: Re: [OpenSER-Users] t_relay(), forward() and send(): retransmissions? To: " I?aki Baz Castillo " <ibc(a)in.ilimit.es> Cc: users(a)openser.org Message-ID: <d18bd3a10710150211n5b0dd1e9oc75297296525c352(a)mail.gmail.com> Content-Type: text/plain; charset="iso-8859-1" forward() and send() are the stateless functions, which basically means they just send the message and forget the transaction. t_relay() is the statefull routing function, so whenever you use this function openSER will take care of the transaction FSM. hope it helps, sam 2007/10/15, Iñaki Baz Castillo <ibc(a)in.ilimit.es>es>: