Im also using 0.8.14 version of ser .. any other good suggestion .. have
you tried using other ver of ser ..
At 03:10 AM 4/28/2005, Leon Sun wrote:
Edgardo,
What?s your SER version?
Me either.
I even couldn?t put modparam("acc", "db_url",
"mysql://ser:heslo@localhost/ser") into ser.cfg. It showed
error in file.
It seemed 0.8.14 doesn?t like it.
From: serusers-bounces@lists.iptel.org
[
mailto:serusers-bounces@lists.iptel.org] On Behalf Of Edgardo O.
Gonzales II
Sent: April 27, 2005 11:17 AM
To: Barry Murphy; Kofi Obiri-Yeboah
Cc: serusers@lists.iptel.org
Subject: Re: [Serusers] ACC into mysql
Hi!
my accounting is still not working though im not receiving any error
message during my startup.
Its nto logging my transaction on my db.
Can you please check my ser.cfg file below .. Please put your comments
..
thanks,
ed
======================
debug=7
#fork=no
#log_stderror=yes
check_via=no
dns=no
rev_dns=no
port=5060
#children=4
fifo="/tmp/ser_fifo"
# ------------------ module loading
----------------------------------
loadmodule "/usr/local/ser/lib/ser/modules/mysql.so"
loadmodule "/usr/local/ser/lib/ser/modules/sl.so"
loadmodule "/usr/local/ser/lib/ser/modules/tm.so"
loadmodule "/usr/local/ser/lib/ser/modules/rr.so"
loadmodule "/usr/local/ser/lib/ser/modules/maxfwd.so"
loadmodule "/usr/local/ser/lib/ser/modules/usrloc.so"
loadmodule "/usr/local/ser/lib/ser/modules/registrar.so"
loadmodule "/usr/local/ser/lib/ser/modules/auth.so"
loadmodule "/usr/local/ser/lib/ser/modules/auth_db.so"
loadmodule "/usr/local/ser/lib/ser/modules/acc.so"
# ----------------- setting module-specific parameters
---------------
# -- usrloc params --
modparam("usrloc", "db_mode", 1)
modparam("usrloc",
"db_url","mysql://ser:heslo@localhost/ser")
# -- auth params --
modparam("auth_db", "calculate_ha1", yes)
modparam("auth_db", "password_column",
"password")
# -- rr params --
modparam("rr", "enable_full_lr", 1)
# -- acc params --
modparam("acc", "log_level", 1)
modparam("acc", "log_flag", 1)
modparam("acc", "log_missed_flag", 3)
modparam("acc", "db_url",
"mysql://ser:heslo@localhost/ser")
modparam("acc", "db_flag", 2)
modparam("acc", "failed_transactions", 1)
# ------------------------- request routing logic
-------------------
alias=test.com
# main routing logic
route{
if
(!mf_process_maxfwd_header("10")) {
sl_send_reply("483","Too Many Hops");
break;
};
if ( msg:len > max_len )
{
sl_send_reply("513", "Message too big");
break;
};
record_route();
if (loose_route()) {
t_relay();
break;
};
if (uri=~"test.com")
{
if (method=="REGISTER") {
setflag(1);
setflag(2);
if (!www_authorize("test.com", "subscriber")) {
www_challenge("test.com", "0");
break;
};
save("location");
break;
};
lookup("aliases");
if (!lookup("location")) {
sl_send_reply("404", "Not Found");
break;
};
};
if (!t_relay()) {
sl_reply_error();
};
}
======================================
At 02:47 PM 4/26/2005, Barry Murphy wrote:
Mine works, just I dont get the BYE into
mysql, even though I see it in ngrep.
Secondly if i call my PBX (Asterisk) via ser
and the asterisk hangs up after giving the time, the call doesnt end on
SER it remains connected.
Stupid stupid thing :(
Barry
----- Original Message -----
From: Edgardo O. Gonzales
II
To: Kofi Obiri-Yeboah
Cc: serusers@lists.iptel.org
Sent: Tuesday, April 26, 2005 6:29 PM
Subject: RE: [Serusers] ACC into mysql
Thanks again for your help .. Here's my running ser.cfg
Hope you can help me make my accounting work..
thanks,
ed
================================================================
# ----------- global configuration parameters
------------------------
#debug=3
#fork=yes
#log_stderror=no
#debug=7
#fork=no
#log_stderror=yes
check_via=no
dns=no
rev_dns=no
#port=5060
#children=4
fifo="/tmp/ser_fifo"
# ------------------ module loading
----------------------------------
loadmodule "/usr/local/ser/lib/ser/modules/mysql.so"
loadmodule "/usr/local/ser/lib/ser/modules/sl.so"
loadmodule "/usr/local/ser/lib/ser/modules/tm.so"
loadmodule "/usr/local/ser/lib/ser/modules/rr.so"
loadmodule "/usr/local/ser/lib/ser/modules/maxfwd.so"
loadmodule "/usr/local/ser/lib/ser/modules/usrloc.so"
loadmodule "/usr/local/ser/lib/ser/modules/registrar.so"
loadmodule "/usr/local/ser/lib/ser/modules/auth.so"
loadmodule "/usr/local/ser/lib/ser/modules/auth_db.so"
loadmodule "/usr/local/ser/lib/ser/modules/acc.so"
# ----------------- setting module-specific parameters
---------------
# -- usrloc params --
modparam("usrloc", "db_mode", 1)
modparam("usrloc",
"db_url","mysql://ser:heslo@localhost/ser")
# -- auth params --
modparam("auth_db", "calculate_ha1", yes)
modparam("auth_db", "password_column",
"password")
# -- rr params --
modparam("rr", "enable_full_lr", 1)
# -- acc params --
modparam("acc", "log_level", 1)
modparam("acc", "log_flag", 1)
modparam("acc", "log_missed_flag", 3)
# ------------------------- request routing logic
-------------------
alias=abc.com.ph
# main routing logic
route{
if
(!mf_process_maxfwd_header("10")) {
sl_send_reply("483","Too Many Hops");
break;
};
if ( msg:len > max_len )
{
sl_send_reply("513", "Message too big");
break;
};
record_route();
if (loose_route()) {
t_relay();
break;
};
if
(uri=~"abc.com.ph") {
if (method=="REGISTER") {
if (!www_authorize("abc.com.ph", "subscriber"))
{
www_challenge("abc.com.ph", "0");
break;
};
save("location");
break;
};
lookup("aliases");
if (!lookup("location")) {
sl_send_reply("404", "Not Found");
break;
};
};
if (!t_relay()) {
sl_reply_error();
};
}
================================================================
At 10:55 AM 4/26/2005, Kofi Obiri-Yeboah wrote:
I am assuming your
question is if the record_route() function is a parameter for accounting?
If that was your question then the answer is no. Generally you invoke
record_route() to ensure acl acceptance on a gateway (i.e. all calls
through that gateway)
-----Original Message-----
From: Edgardo O. Gonzales II [
mailto:edgardo.g@pacific.net.ph]
Sent: Monday, April 25, 2005 6:22 PM
To: Kofi Obiri-Yeboah
Cc: serusers@lists.iptel.org
Subject: RE: [Serusers] ACC into mysql
Hi Kofi!
got it.. thanks for immediate feedback .. however my accounting is not
working.
any parameters to be added to make it work..
I have the following info already on my ser.cfg
modparam("acc", "log_level", 1)
modparam("acc", "log_flag", 1)
modparam("acc", "log_missed_flag", 3)
record_route(); -> its this a parameter for accounting
thanks,
ed
At 08:32 AM 4/26/2005, Kofi Obiri-Yeboah wrote:
I think the correct
modparam statement should read as follows:
modparam("acc",
"db_url", "mysql://ser:heslo@localhost/ser")
please note that "my" is
required in front of sql
and not:
modparam("acc", "db_url",
"sql://ser:heslo@localhost/ser")
-----Original Message-----
From: serusers-bounces@lists.iptel.org [
mailto:serusers-bounces@lists.iptel.org]On Behalf Of Edgardo O. Gonzales II
Sent: Monday, April 25, 2005 5:20 PM
To: serusers@lists.iptel.org
Subject: Re: [Serusers] ACC into mysql
Hi all!
Im also receiving this error message.
Can somebody help us on how to make accounting work using mysql.
thanks,
ed
At 06:01 AM 4/26/2005, Leon Sun wrote:
Hi,
I am using 0.8.12 in Fedora 3. I tried to log account info into Mysql
followed instruction from manual. I found, first,
modparam("acc", "db_url",
"sql://ser:heslo@localhost/ser") coudnlt work at all in
ser.cfg. If I enabled in cfg file, it showed Starting ser: ERROR:
bad config file (1 errors)
If I disabled it, SER worked fine but I couldnt see any record in acc
table.
Would anyone suggest how to put call records into Mysql?
Thank you.
# ----------- global configuration parameters ------------------------
#debug=3 # debug level
(cmd line: -dddddddddd)
#fork=yes
#log_stderror=no # (cmd line:
-E)
/* Uncomment these lines to enter debugging mode
debug=7
fork=no
log_stderror=yes
*/
check_via=no # (cmd. line: -v)
dns=no #
(cmd. line: -r)
rev_dns=no # (cmd. line: -R)
#port=5060
#children=4
fifo="/tmp/ser_fifo"
# ------------------ module loading ----------------------------------
# Uncomment this if you want to use SQL database
loadmodule "/usr/lib/ser/modules/mysql.so"
loadmodule "/usr/lib/ser/modules/acc.so"
loadmodule "/usr/lib/ser/modules/sl.so"
loadmodule "/usr/lib/ser/modules/tm.so"
loadmodule "/usr/lib/ser/modules/rr.so"
loadmodule "/usr/lib/ser/modules/maxfwd.so"
loadmodule "/usr/lib/ser/modules/usrloc.so"
loadmodule "/usr/lib/ser/modules/registrar.so"
# Uncomment this if you want digest authentication
# mysql.so must be loaded !
loadmodule "/usr/lib/ser/modules/auth.so"
loadmodule "/usr/lib/ser/modules/auth_db.so"
# ----------------- setting module-specific parameters ---------------
#modparam("acc", "db_url",
"sql://ser:heslo@localhost/ser")
# -- usrloc params --
#modparam("usrloc", "db_mode", 0)
# Uncomment this if you want to use SQL database
# for persistent storage and comment the previous line
modparam("usrloc", "db_mode", 2)
# -- auth params --
# Uncomment if you are using auth module
#
modparam("auth_db", "calculate_ha1", yes)
#
# If you set "calculate_ha1" parameter to yes (which true in
this config),
# uncomment also the following parameter)
#
modparam("auth_db", "password_column",
"password")
# -- rr params --
# add value to ;lr param to make some broken UAs happy
modparam("rr", "enable_full_lr", 1)
modparam("acc","log_level",1)
modparam("acc","log_flag",1)
# ------------------------- request routing logic
-------------------
# main routing logic
route{
# initial sanity checks --
messages with
# max_forwards==0, or
excessively long requests
if
(!mf_process_maxfwd_header("10")) {
sl_send_reply("483","Too Many Hops");
break;
};
if ( msg:len > max_len ) {
sl_send_reply("513", "Message too big");
break;
};
# we record-route all messages
-- to make sure that
# subsequent messages will go
through our proxy; that's
# particularly good if
upstream and downstream entities
# use different transport
protocol
record_route();
# loose-route processing
if (loose_route()) {
if (method=="BYE") {
setflag(1);
setflag(2);
}
t_relay();
break;
};
#labeled all transaction for
accounting
setflag(1);
setflag(2);
if
(method=="CANCEL"){
t_relay();
};
# (in case, it does not work,
use the following command
# with proper names and
addresses in it)
if (uri==myself) {
# This for PSTN destination
if (uri=~"^sip:1")
{
rewritehost("10.10.10.10");
forward(10.10.10.10,5060);
break;
}
if (method=="REGISTER") {
# Uncomment this if you want to use digest authentication
if (!www_authorize("sip.mycommunications.com",
"subscriber")) {
www_challenge("sip.mycommunications.com", "0");
break;
};
save("location");
break;
};
# native SIP destinations are handled using our USRLOC DB
if (!lookup("location")) {
sl_send_reply("404", "Not Found");
break;
};
};
# forward to current uri now;
use stateful forwarding; that
# works reliably even if we
forward from TCP to UDP
if (!t_relay()) {
sl_reply_error();
};
}
_______________________________________________
Serusers mailing list
serusers@lists.iptel.org
http://lists.iptel.org/mailman/listinfo/serusers
_______________________________________________
Serusers mailing list
serusers@lists.iptel.org
http://lists.iptel.org/mailman/listinfo/serusers