Code snippet

#!ifdef WITH_TCP

        #$ru = $ru + ";transport=tcp";

        #force_send_socket(xx.xx.xx.xx:5060); where xx.xx.xx.xx is Kamailio IP-Address

        xlog("L_INFO","=>Transport TCP");

        xlog("L_INFO","  =>du:$du");

        xlog("L_INFO","  =>ru:$ru");

        if (!t_relay_to_tcp()) {

           sl_reply_error();

        }

#!else

        xlog("L_INFO","=>Transport UDP");

        xlog("L_INFO","  =>du:$du");

        xlog("L_INFO","  =>ru:$ru");

        if (!t_relay()) {

           sl_reply_error();

        }

#!endif

LOG =>

ERROR: <core> [core/pvapi.c:1377]: pv_printf(): no more space for spec value

ERROR: <core> [core/pvapi.c:1386]: pv_printf(): buffer overflow -- increase the

        NOTE: I have both of these set to 8K and still get these errors

INFO: <script>: =>Transport TCP

INFO: <script>:   =>du:sip:9NCUg2nceiuKagasFQFsAbtsMGcH1yE=@xx.xx.xx.xx:54080;transport=TCP;lr;r2=on;ftag=suhg8sv2lm;nat=yes

INFO: <script>:   =>ru:sip:9NCUg2nceiuKagasFQFsAbtsMGcH1yE=@xx.xx.xx.xx:54080;transport=TCP;lr;r2=on;ftag=suhg8sv2lm;nat=yes

WARNING: <core> [core/forward.c:231]: get_send_socket2(): protocol/port mismatch (forced tls:xx.xx.xx.xx:443, to tcp:xx.xx.xx.xx:54080)

ERROR: <core> [core/tcp_main.c:2660]: tcpconn_1st_send(): connect 172.21.1.108:54080 failed (RST) Connection refused

ERROR: <core> [core/tcp_main.c:2670]: tcpconn_1st_send(): xx.xx.xx.xx:54080: connect & send  for 0x7f1915a61040 failed: Connection refused (111)

         NOTE: Our tcp ports are controlled, a port number this high would never be opend on our server

         NOTE: This error occurs on ACK back to the INVITE

From: sr-users [mailto:sr-users-bounces@lists.kamailio.org] On Behalf Of Mack Hendricks
Sent: Thursday, May 17, 2018 9:43 AM
To: Kamailio (SER) - Users Mailing List <sr-users@lists.kamailio.org>
Subject: Re: [SR-Users] Further question on transport issue.

Hey Steve,

Can provide us a snippet of code on how you are populating the $ru and making invoking the relay?

Mack Hendricks / Head of Support / dOpenSource

web: http://dopensource.com

support: +888-907-2085

dSIPRouter - GUI focused on implementing Kamailio to provide SIP Trunking and PBX Hosting Services

On May 17, 2018, at 3:36 PM, Wilkins, Steve <swwilkins@mitre.org> wrote:

Hello,

I am still struggling with getting TCP relay to work.  Kamailio is now trying to send TCP but it is using the incorrect port.  Kamailio is relaying to Asterisk on xx.xx.xx.xx:some-large-port but Asterisk is listening on xx.xx.xx.xx:5060.  I’m not sure why this is happening.  I would appreciate any help.

Thank you,

_______________________________________________
Kamailio (SER) - Users Mailing List
sr-users@lists.kamailio.org
https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users