6 Jul
2006
6 Jul
'06
10:45 a.m.
Are you going to try to figure out anything yourself? Or maybe I should
just do it for you?
When I answer people on the list, I assume they have made a reasonable
effort to find out themselves first (for example reading very recent
threads on cdrtools for example). It seems that I have been too helpful
in your case. Search the list on google (site:mail.iptel.org). If you
cannot figure something out, ask a specific question to the list.
g-)
ravi reddy wrote:
Thank you Mr. Greger V. Teigre
Now i set the flag so that i can get the data for each messsage i.e
when account starts and when account stops .
I think this is all a RAW DATA so here if i
want to make all the data in a "order" and make a CDR is there a way
to do it from this RAW data if yes please tell me, i will go through
that docs or if is there any othere way to do the CDR's From this
database please tell me
Thank You
Regards,
Ravi.
On 7/5/06, *Greger V. Teigre* <greger(a)teigre.com
<mailto:greger@teigre.com>> wrote:
You only need to set the flag once for each message type.
g-)
ravi reddy wrote:
Thank you Mr.GREGER V. Teigre
yesterday i tried in almost all places by keeping
the flags at last i found two places one in loose route and
another before loose route section but for both
methods iam getting another problem :- that is in radius database
in radacct table iam getting two entries for single call it show
like this -->
-------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
radaccid| username | AcctstartTime
| AcctStopTime | calledstationid |
AcctSessionTime|
-------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
| 20 | 32331001(a)81.21.34.37 <mailto:32331001@81.21.34.37>
| 2006-07-05 10:44:09 | 2006-07-05 10:45:24 |
sip:22223333@81.21.34.37 <mailto:sip:22223333@81.21.34.37>
| 0 |
| 21 | 32331001(a)81.21.34.37 <mailto:32331001@81.21.34.37>
| 2006-07-05 10:44:09 | 2006-07-05 10:45:24 |
sip:22223333@81.21.34.37 <mailto:sip:22223333@81.21.34.37>
| 0 |
-___________________________________________________________________________________________
so this is the problem i have had now how can i get only a
single radacctid for a single call
please help me Thanks in Advance
Regards
Ravi.
On 7/5/06, *Greger V. Teigre* <greger(a)teigre.com
<mailto:greger@teigre.com>> wrote:
You probably haven't set the accounting flag in your
loose_route handling. Do a test pretty early in your ser.cfg
main route (before if(loose_route()) and set the appropriate
flags.
g-)
ravi reddy wrote:
Thanks For your Response Mr. *Greger V.
Teigre
I did* it ,by checking the dictionaries
by seeing your messages in 2004 archives ,
but here i got a problem is that if i set "radius flag" in
ser.cfg near call invite then i am only getting
AccStartTime but not AccStop Time
If i set flags near (cancel or Bye) iam getting only
account stop time and the acct start time is not showing ,
if i set two places even then iam getting only one time
*+----------------------+---------------------+---------------------+--------------------------+--------------------------+
| username | acctstarttime |
acctstoptime | callingstationid |
calledstationid |
+----------------------+---------------------+---------------------+--------------------------+--------------------------+
| 32331001(a)81.21.34.37 <mailto:32331001@81.21.34.37> |
2006-07-04 18:45:50 | 2006-07-04 18:45:50 |
sip:32331001@81.21.34.37 <mailto:sip:32331001@81.21.34.37> |
sip:22223333@81.21.34.37 <mailto:sip:22223333@81.21.34.37> |
| 32331001(a)81.21.34.37 <mailto:32331001@81.21.34.37> |
2006-07-04 18:36:29 | 2006-07-04 18:36:29 |
sip:32331001@81.21.34.37 <mailto:sip:32331001@81.21.34.37> |
sip:22223333@81.21.34.37 <mailto:sip:22223333@81.21.34.37> |
| 32331001(a)81.21.34.37 <mailto:32331001@81.21.34.37> |
2006-07-04 18:17:35 | 2006-07-04 18:17:35 |
sip:32331001@81.21.34.37 <mailto:sip:32331001@81.21.34.37> |
sip:22223333@81.21.34.37 <mailto:sip:22223333@81.21.34.37> |
| 32331001(a)81.21.34.37 <mailto:32331001@81.21.34.37> |
2006-07-04 18:32:50 | 2006-07-04 18:32:50 |
sip:32331001@81.21.34.37 <mailto:sip:32331001@81.21.34.37> |
sip:22223333@81.21.34.37 <mailto:sip:22223333@81.21.34.37> |
+----------------------+---------------------+---------------------+--------------------------+--------------------------+
so how i can get out of this trouble please help me ;
Thank you
regards
Ravi.
*
On 7/4/06, *Greger V. Teigre* <greger(a)teigre.com
<mailto:greger@teigre.com>> wrote:
I suggest you figure out your dictionary first (ref.
your other post). Without the attributes in place, you
get nowhere.
Remember that there are several elements to radius
functionality in SER:
- standalone radius server
- dictionary file for radius server
- SER radius modules compiled and linked against
radiusclient-ng (library)
- the radiusclient.conf file defining the setup for the
radius client (used by SER radius modules)
- dictionary file for radiusclient-ng
The attributes used are defined in SER modules. All
attributes must be found in the radiusclient.conf file
(so that the radiusclient can understand the attributes
defined in the modules).
Then the radiusserver needs to understand all the
attributes (using it's own dictionary).
It looks like this:
ser.cfg radiusauth or setflag (acc_flag) => calls radius
module => linked against radiusclient-ng.so => reads
radiusclient.conf and dictionary => sends requests on
udp 1812 and 1813 => radius server listens on ports and
handles request responding back to radiusclent, which
returns data (or just ok) to the module
g-)
ravi reddy wrote:
Mr. Greger V.Teigre
Thanks for your response , when i tried changing
line as radius_log_flag the SER is showing there is
no module like Radius_log_flag in acc module but when i
keep like radius_flag its showing o.k
but here my doubt is are the accounting messages will
log in to radius???
my config file is accepting the radius_missed_flag...
is this setting will log the messages in radacct????
Are you using FreeRadius for accounting ???
waiting for your reply
Regards
Ravi.
On 7/4/06, *Greger V. Teigre* <greger(a)teigre.com
<mailto:greger@teigre.com> > wrote:
"To enable RADIUS accounting simply use
radius_log_flag and radius_log_missed_flag
parameters instead of log_flag and log_missed_flag.
Mark transactions that should be logged with flags
configured in the parameters."
This means that you use modparam to set the flag
values for these two and then use setflag(yourflag)
where you want radius accounting to happen.
g-)
ravi reddy wrote:
Hi SER Users ,
I tried to install SER with basic
configurations and also with onsip config file with
these SER is working pretty good ,Now i want to
test accounting on radius server i installed Radius
server with sql module and it is listening on 1813
for accounting , i am using radiusclient-ng-0.5.2
and i append dictionary.ser to main dictionary
file. every thing is o.k
Now , how can I get the
accounting details in radius server is there any
specific configuration to do that ?
in ser.cfg i make some changes as shown in
SER_RADIUS HOW TO's but i dont understand the way
to move ........... :-(
so any body can please tell me an out line scenario
how to send account packets to radius server so
that i will work on that ;
Thanks in Advance
Regards'
Ravi.
------------------------------------------------------------------------
_______________________________________________
Serusers mailing list
Serusers(a)lists.iptel.org <mailto:Serusers@lists.iptel.org>
http://lists.iptel.org/mailman/listinfo/serusers