19 Nov
2005
19 Nov
'05
12:09 a.m.
By the way -- set fork=yes in the config file. fork=no is mainly for
debugging and some things may not work correctly in no-fork mode.
Jan.
On 18-11-2005 21:50, Rosa De Santis wrote:
Hello. Thanks for your help.
This is my ser.cfg.
I set log_flag, log_level and radius_flag to 1, and I don't get anything in
syslog.
This is what you mean?
Thanks again.
Rosa.
------------------------
debug = 9
fork=no
log_stderror=yes
check_via=no # (cmd. line: -v)
dns=no # (cmd. line: -r)
rev_dns=no # (cmd. line: -R)
#port=5060
#children=4
fifo="/tmp/ser_fifo"
loadmodule "/usr/local/lib/ser/modules/mysql.so"
loadmodule "/usr/local/lib/ser/modules/sl.so"
loadmodule "/usr/local/lib/ser/modules/tm.so"
loadmodule "/usr/local/lib/ser/modules/rr.so"
loadmodule "/usr/local/lib/ser/modules/maxfwd.so"
loadmodule "/usr/local/lib/ser/modules/usrloc.so"
loadmodule "/usr/local/lib/ser/modules/registrar.so"
loadmodule "/usr/local/lib/ser/modules/textops.so"
loadmodule "/usr/local/lib/ser/modules/acc.so"
loadmodule "/usr/local/lib/ser/modules/auth.so"
loadmodule "/usr/local/lib/ser/modules/auth_radius.so"
modparam("usrloc", "db_mode", 2)
modparam("acc", "log_level", 1)
modparam("acc", "log_flag", 1)
modparam("acc", "radius_config",
"/usr/local/etc/radiusclient-ng/radiusclient.conf")
modparam("acc", "radius_missed_flag", 2)
modparam("acc", "radius_flag", 1)
modparam("acc", "service_type", 15)
modparam("auth_radius", "radius_config",
"/usr/local/etc/radiusclient-ng/radiusclient.conf")
route{
if (!mf_process_maxfwd_header("10")) {
sl_send_reply("483","Too Many Hops");
break;
};
if (msg:len >= 2048 ) {
sl_send_reply("513", "Message too big");
break;
};
setflag(1);
if (!method=="REGISTER") record_route();
if (loose_route()) {
# mark routing logic in request
append_hf("P-hint: rr-enforced\r\n");
route(1);
break;
};
if (!uri==myself) {
# mark routing logic in request
append_hf("P-hint: outbound\r\n");
route(1);
break;
};
if (uri==myself) {
if (method=="REGISTER") {
if (!radius_www_authorize("")) {
www_challenge("", "0");
break;
};
save("location");
break;
};
lookup("aliases");
if (!uri==myself) {
append_hf("P-hint: outbound alias\r\n");
route(1);
break;
};
# native SIP destinations are handled using our USRLOC DB
if (!lookup("location")) {
sl_send_reply("404", "Not Found");
break;
};
};
append_hf("P-hint: usrloc applied\r\n");
route(1);
}
route[1]
{
if (!t_relay()) {
sl_reply_error();
};
}
------------------------
From: Jan Janak <jan(a)iptel.org>
To: Rosa De Santis <rosadesantis(a)hotmail.com>
CC: serusers(a)lists.iptel.org
Subject: Re: [Serusers] Radius accounting
Date: Fri, 18 Nov 2005 21:16:22 +0100
Did you mark the transaction with correct flag ? Try to configure both
syslog and radius accounting with the same flag and see if you get any
accounting records in syslog.
Jan.
On 18-11-2005 20:04, Rosa De Santis wrote:
_______________________________________________
Serusers mailing list
serusers(a)lists.iptel.org
http://lists.iptel.org/mailman/listinfo/serusers Yes, I set the server IP in authserver and
acctserver in the
radiusclient.conf file in the radiusclient-ng folder.
I also added the server and secret in the servers file in the same
folder.
The strange thing is that i'm making
authorization to the same Radius
server, why accounting is not working?
Thanks
Rosa.
>From: Jan Janak <jan(a)iptel.org>
>To: Rosa De Santis <rosadesantis(a)hotmail.com>
>CC: serusers(a)lists.iptel.org
>Subject: Re: [Serusers] Radius accounting
>Date: Fri, 18 Nov 2005 21:04:26 +0100
>
>Did you configure the accounting server in the configuration file of
>radiusclient-ng ?
>
>Do you have correct secret for the server ?
>
> Jan.
>
>On 18-11-2005 18:25, Rosa De Santis wrote:
>> Hello all.
>>
>> Please, I am trying to make Radius authorization and accounting using
>SER
>> 0.9.3 and radiusclient-ng. I already set all the configuration as the
>> ser_radius HowTo.
>> Now, I'm making Radius authorization successfully, but not
accounting, I
>> don't get anything going out through
port 1813.
>>
>> The Radius Server is in another machine, i'm configuring only the
radius
>> client.
>> Is there other things to do besides the ser_radius howto? Please
help...
> >>
> >> Thanks a lot
> >> Rosa.
> >>
> >>
> >> _______________________________________________
> >> Serusers mailing list
> >> serusers(a)lists.iptel.org
> >> http://lists.iptel.org/mailman/listinfo/serusers
>
>
> _______________________________________________
> Serusers mailing list
> serusers(a)lists.iptel.org
> http://lists.iptel.org/mailman/listinfo/serusers