30 May
2013
30 May
'13
10:37 p.m.
Yes, As OEJ mentioned there were no Dialogs created so had to put the
dlg_manage(); in the cfg and now in kamcmd the dlg.list command displays
call data.
How can I add presence stuff now.
Vitaliy, please explain further how can I add the PUA component.
Thanks,
Sammy
On Thu, May 30, 2013 at 6:17 PM, Olle E. Johansson <oej(a)edvina.net> wrote:
30 maj 2013 kl. 13:07 skrev SamyGo <govoiper(a)gmail.com>om>:
Hi again,
I doubt SCA module will work for me but let me get this a shot tonight and
get back with a sipgrep trace. Meanwhile I was just thinking if the 'skype
like service' blog at
Asipto<http://kb.asipto.com/kamailio:skype-like-service-in-less-than-one…
work straight away. I really don;t see any difference in my PRESENCE
route but maybe I've missed anything.
Let me get back with more working on this.
Start with making sure that the Dialog module works as expected for you.
Check with kamcmd that you have active dialogs when you have active calls.
When that works, start with adding presence.
Cheers,
/O
Thanks for the reply.
Sammy Go.
On Wed, May 29, 2013 at 1:35 PM, Daniel-Constantin Mierla <
miconda(a)gmail.com> wrote:
Hello,
just to say that SCA module might be an alternative, not sure it works
for blf, could be only for bla/sla, but worth checking the email.
Also, if you post ngrep output (sip traffic as sip), could be easier to
review the traces from a device that is not yet capable of installing
tcpdump/ngrep/etc ... tools, like tablets, smartphones ... increasing your
chance to get more people to an answer.
Cheers,
Daniel
On 5/28/13 11:41 PM, SamyGo wrote:
Yeah, I'm getting your point.
So now, here are my loaded modules.
#!ifdef WITH_PRESENCE
loadmodule "presence.so"
loadmodule "presence_xml.so"
loadmodule "presence_dialoginfo.so"
loadmodule "pua.so"
loadmodule "pua_dialoginfo.so"
loadmodule "pua_usrloc.so"
#!endif
And of course:
loadmodule "dialog.so"
Attached are the relevant sip traces.
On Wed, May 29, 2013 at 2:32 AM, SamyGo <govoiper(a)gmail.com> wrote:
_______________________________________________
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
sr-users(a)lists.sip-router.org
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
_______________________________________________
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
sr-users(a)lists.sip-router.org
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
Yeah, I'm getting your point.
So now, here are my loaded modules.
#!ifdef WITH_PRESENCE
loadmodule "presence.so"
loadmodule "presence_xml.so"
loadmodule "presence_dialoginfo.so"
loadmodule "pua.so"
loadmodule "pua_dialoginfo.so"
loadmodule "pua_usrloc.so"
#!endif
And of course:
loadmodule "dialog.so"
Attached are the relevant sip traces.
On Wed, May 29, 2013 at 1:00 AM, Vitaliy Aleksandrov <
vitalik.voip(a)gmail.com> wrote:
_______________________________________________
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing
listsr-users@lists.sip-router.orghttp://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
--
Daniel-Constantin Mierla - http://www.asipto.comhttp://twitter.com/#!/miconda -
http://www.linkedin.com/in/miconda
Kamailio Advanced Training, San Francisco, USA - June 24-27, 2013
* http://asipto.com/u/katu *
_______________________________________________
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
sr-users(a)lists.sip-router.org
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
You didn't receive any NOTIFY requests
because you didn't have a PUA
client. rfc3903 describes what a PUA client is.
To make BLF work you can try to use the next modules:
1. dialog - to enable dialog awareness
2. pua + pua_dialoginfo - to enable a PUA client based on active
dialogs information provided by the "dialog" module
3. presence + presence_dialoginfo - to handle subscriptions and send
notifications to phones
Hi list,
I've been trying to make my Yealink phone to give BLF indications but
I haven't been able to achieve this successfully yet so I need some expert
advise here.
My Yealink phone, as soon as it registers to Asterisk, gives me BLF
lights. The same phone registering to Kamailio sends SUBSCRIBE and nothing
happens.
The Presence Handling is enabled in configurations and yet no
dialog-info+xml NOTIFY is received.
Please help.
Best Regards,
Sammy Go.
_______________________________________________
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing
listsr-users@lists.sip-router.orghttp://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
_______________________________________________
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
sr-users(a)lists.sip-router.org
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users