Mine works, just I dont get the BYE into mysql, even though I see it in ngrep.
 
Secondly if i call my PBX (Asterisk) via ser and the asterisk hangs up after giving the time, the call doesnt end on SER it remains connected.
 
Stupid stupid thing :(
 
Barry
 

----- Original Message -----

From: Edgardo O. Gonzales II

To: Kofi Obiri-Yeboah

Cc: serusers@lists.iptel.org

Sent: Tuesday, April 26, 2005 6:29 PM

Subject: RE: [Serusers] ACC into mysql

Thanks again for your help .. Here's my running ser.cfg

Hope you can help me make my accounting work..

thanks,

ed

================================================================

# ----------- global configuration parameters ------------------------

#debug=3

#fork=yes

#log_stderror=no

#debug=7

#fork=no

#log_stderror=yes

check_via=no

dns=no

rev_dns=no

#port=5060

#children=4

fifo="/tmp/ser_fifo"

# ------------------ module loading ----------------------------------

loadmodule "/usr/local/ser/lib/ser/modules/mysql.so"

loadmodule "/usr/local/ser/lib/ser/modules/sl.so"

loadmodule "/usr/local/ser/lib/ser/modules/tm.so"

loadmodule "/usr/local/ser/lib/ser/modules/rr.so"

loadmodule "/usr/local/ser/lib/ser/modules/maxfwd.so"

loadmodule "/usr/local/ser/lib/ser/modules/usrloc.so"

loadmodule "/usr/local/ser/lib/ser/modules/registrar.so"

loadmodule "/usr/local/ser/lib/ser/modules/auth.so"

loadmodule "/usr/local/ser/lib/ser/modules/auth_db.so"

loadmodule "/usr/local/ser/lib/ser/modules/acc.so"

# ----------------- setting module-specific parameters ---------------

# -- usrloc params --

modparam("usrloc", "db_mode", 1)

modparam("usrloc", "db_url","mysql://ser:heslo@localhost/ser")

# -- auth params --

modparam("auth_db", "calculate_ha1", yes)

modparam("auth_db", "password_column", "password")

# -- rr params --

modparam("rr", "enable_full_lr", 1)

# -- acc params --

modparam("acc", "log_level", 1)

modparam("acc", "log_flag", 1)

modparam("acc", "log_missed_flag", 3)

# -------------------------  request routing logic -------------------

alias=abc.com.ph

# main routing logic

route{

        if (!mf_process_maxfwd_header("10")) {

                sl_send_reply("483","Too Many Hops");

                break;

        };

        if ( msg:len > max_len ) {

                sl_send_reply("513", "Message too big");

                break;

        };

        record_route();

        if (loose_route()) {

                t_relay();

                break;

        };

        if (uri=~"abc.com.ph") {

                if (method=="REGISTER") {

                        if (!www_authorize("abc.com.ph", "subscriber")) {

                                www_challenge("abc.com.ph", "0");

                                break;

                        };

                        save("location");

                        break;

                };

                lookup("aliases");

                if (!lookup("location")) {

                        sl_send_reply("404", "Not Found");

                        break;

                };

        };

        if (!t_relay()) {

                sl_reply_error();

        };

}

================================================================

At 10:55 AM 4/26/2005, Kofi Obiri-Yeboah wrote:

I am assuming your question is if the record_route() function is a parameter for accounting? If that was your question then the answer is no. Generally you invoke record_route() to ensure acl acceptance on a gateway (i.e. all calls through that gateway)

-----Original Message-----

From: Edgardo O. Gonzales II [ mailto:edgardo.g@pacific.net.ph]

Sent: Monday, April 25, 2005 6:22 PM

To: Kofi Obiri-Yeboah

Cc: serusers@lists.iptel.org

Subject: RE: [Serusers] ACC into mysql

Hi Kofi!

got it.. thanks for immediate feedback .. however my accounting is not working.

any parameters to be added to make it work..

I have the following info already on my ser.cfg

modparam("acc", "log_level", 1)

modparam("acc", "log_flag", 1)

modparam("acc", "log_missed_flag", 3)

record_route(); -> its this a parameter for accounting

thanks,

ed

At 08:32 AM 4/26/2005, Kofi Obiri-Yeboah wrote:

I think the correct modparam statement should read as follows:

modparam("acc", "db_url", "mysql://ser:heslo@localhost/ser")

 

please note that "my" is required in front of sql

 

and not:

modparam("acc", "db_url", "sql://ser:heslo@localhost/ser")

-----Original Message-----

From: serusers-bounces@lists.iptel.org [ mailto:serusers-bounces@lists.iptel.org]On Behalf Of Edgardo O. Gonzales II

Sent: Monday, April 25, 2005 5:20 PM

To: serusers@lists.iptel.org

Subject: Re: [Serusers] ACC into mysql

Hi all!

Im also receiving this error message.

Can somebody help us on how to make accounting work using mysql.

thanks,

ed

At 06:01 AM 4/26/2005, Leon Sun wrote:

Hi,

I am using 0.8.12 in Fedora 3. I tried to log account info into Mysql followed instruction from manual. I found, first, modparam("acc", "db_url", "sql://ser:heslo@localhost/ser") coudnlt work at all in ser.cfg. If I enabled in cfg file, it showed  Starting ser: ERROR: bad config file (1 errors)

If I disabled it, SER worked fine but I couldnt see any record in acc table.

Would anyone suggest how to put call records into Mysql?

Thank you.

# ----------- global configuration parameters ------------------------

#debug=3         # debug level (cmd line: -dddddddddd)

#fork=yes

#log_stderror=no        # (cmd line: -E)

/* Uncomment these lines to enter debugging mode

debug=7

fork=no

log_stderror=yes

*/

check_via=no    # (cmd. line: -v)

dns=no           # (cmd. line: -r)

rev_dns=no      # (cmd. line: -R)

#port=5060

#children=4

fifo="/tmp/ser_fifo"

# ------------------ module loading ----------------------------------

# Uncomment this if you want to use SQL database

loadmodule "/usr/lib/ser/modules/mysql.so"

loadmodule "/usr/lib/ser/modules/acc.so"

loadmodule "/usr/lib/ser/modules/sl.so"

loadmodule "/usr/lib/ser/modules/tm.so"

loadmodule "/usr/lib/ser/modules/rr.so"

loadmodule "/usr/lib/ser/modules/maxfwd.so"

loadmodule "/usr/lib/ser/modules/usrloc.so"

loadmodule "/usr/lib/ser/modules/registrar.so"

# Uncomment this if you want digest authentication

# mysql.so must be loaded !

loadmodule "/usr/lib/ser/modules/auth.so"

loadmodule "/usr/lib/ser/modules/auth_db.so"

# ----------------- setting module-specific parameters ---------------

#modparam("acc", "db_url", "sql://ser:heslo@localhost/ser")

# -- usrloc params --

#modparam("usrloc", "db_mode",   0)

# Uncomment this if you want to use SQL database

# for persistent storage and comment the previous line

modparam("usrloc", "db_mode", 2)

# -- auth params --

# Uncomment if you are using auth module

#

modparam("auth_db", "calculate_ha1", yes)

#

# If you set "calculate_ha1" parameter to yes (which true in this config),

# uncomment also the following parameter)

#

modparam("auth_db", "password_column", "password")

# -- rr params --

# add value to ;lr param to make some broken UAs happy

modparam("rr", "enable_full_lr", 1)

modparam("acc","log_level",1)

modparam("acc","log_flag",1)

# -------------------------  request routing logic -------------------

# main routing logic

route{

        # initial sanity checks -- messages with

        # max_forwards==0, or excessively long requests

        if (!mf_process_maxfwd_header("10")) {

                sl_send_reply("483","Too Many Hops");

                break;

        };

        if ( msg:len > max_len ) {

                sl_send_reply("513", "Message too big");

                break;

        };

        # we record-route all messages -- to make sure that

        # subsequent messages will go through our proxy; that's

        # particularly good if upstream and downstream entities

        # use different transport protocol

        record_route();

        # loose-route processing

        if (loose_route()) {

                if (method=="BYE") {

                   setflag(1);

                   setflag(2);

                }

                t_relay();

                break;

        };

        #labeled all transaction for accounting

        setflag(1);

        setflag(2);

        if (method=="CANCEL"){

                                t_relay();

                            };

        # (in case, it does not work, use the following command

        # with proper names and addresses in it)

        if (uri==myself) {

                        # This for PSTN destination

                        if (uri=~"^sip:1")

                        {       rewritehost("10.10.10.10");

                                forward(10.10.10.10,5060);

                                break;

                        }

                if (method=="REGISTER") {

                # Uncomment this if you want to use digest authentication

                        if (!www_authorize("sip.mycommunications.com", "subscriber")) {

                                www_challenge("sip.mycommunications.com", "0");

                                break;

                        };

                        save("location");

                        break;

                };

                # native SIP destinations are handled using our USRLOC DB

                if (!lookup("location")) {

                        sl_send_reply("404", "Not Found");

                        break;

                };

        };

        # forward to current uri now; use stateful forwarding; that

        # works reliably even if we forward from TCP to UDP

        if (!t_relay()) {

                sl_reply_error();

        };

}

_______________________________________________

Serusers mailing list

serusers@lists.iptel.org

http://lists.iptel.org/mailman/listinfo/serusers

---

_______________________________________________

Serusers mailing list

serusers@lists.iptel.org

http://lists.iptel.org/mailman/listinfo/serusers