12 Nov
2006
12 Nov
'06
9:32 p.m.
I ran the command(s) and I get the following output (The only difference is
that I do not see an explicit "NO" in the NULL Column; other than they are
similar to what you wrote). I am running mysql 4.1.12 on CentOS 4.3
mysql> select * from version where table_name like 'domain%';
+-----------------+---------------+
| table_name | table_version |
+-----------------+---------------+
| domain_attrs | 1 |
| domain | 2 |
| domain_settings | 1 |
+-----------------+---------------+
3 rows in set (0.00 sec)
mysql> desc domain;
+--------+------------------+------+-----+---------+-------+
| Field | Type | Null | Key | Default | Extra |
+--------+------------------+------+-----+---------+-------+
| did | varchar(64) | | | | |
| domain | varchar(128) | | PRI | | |
| flags | int(10) unsigned | | | 0 | |
+--------+------------------+------+-----+---------+-------+
3 rows in set (0.00 sec)
mysql> desc domain_attrs;
+-------+------------------+------+-----+---------+-------+
| Field | Type | Null | Key | Default | Extra |
+-------+------------------+------+-----+---------+-------+
| did | varchar(64) | YES | MUL | NULL | |
| name | varchar(32) | | | | |
| type | int(11) | | | 0 | |
| value | varchar(255) | YES | | NULL | |
| flags | int(10) unsigned | | | 0 | |
+-------+------------------+------+-----+---------+-------+
5 rows in set (0.00 sec)
From: Michal Matyska <michal(a)iptel.org>
To: SER LIST <sergrp(a)hotmail.com>om>, serusers(a)lists.iptel.org
Subject: Re: [Serusers] SER pre-release - PRESENCE ISSUES
Date: Sun, 12 Nov 2006 16:12:46 +0100
Ok, there were no hint that you did it already. In that case please
check what value is in the table "version".
mysql -user -pheslo ser010
mysql> select * from version where table_name like 'domain%';
+-----------------+---------------+
| table_name | table_version |
+-----------------+---------------+
| domain_attrs | 1 |
| domain | 2 |
| domain_settings | 1 |
+-----------------+---------------+
3 rows in set (0.02 sec)
You should see the output as above. Check the table structure (just to
be sure).
mysql> desc domain;
+--------+------------------+------+-----+---------+-------+
| Field | Type | Null | Key | Default | Extra |
+--------+------------------+------+-----+---------+-------+
| did | varchar(64) | NO | | | |
| domain | varchar(128) | NO | PRI | | |
| flags | int(10) unsigned | NO | | 0 | |
+--------+------------------+------+-----+---------+-------+
3 rows in set (0.09 sec)
mysql> desc domain_attrs;
+-------+------------------+------+-----+---------+-------+
| Field | Type | Null | Key | Default | Extra |
+-------+------------------+------+-----+---------+-------+
| did | varchar(64) | YES | MUL | NULL | |
| name | varchar(32) | NO | | | |
| type | int(11) | NO | | 0 | |
| value | varchar(255) | YES | | NULL | |
| flags | int(10) unsigned | NO | | 0 | |
+-------+------------------+------+-----+---------+-------+
5 rows in set (0.00 sec)
Michal
On Sun, 2006-11-12 at 09:34 -0500, SER LIST wrote:
celebrating
_________________________________________________________________
Find a local pizza place, music store, museum and moreĀ
then map the best
route! Check out Live Local today! http://local.live.com/?mkt=en-ca/
But that is exactly what I had done. I had used
the ser_mysql.sh script
that
came w/ the CVS version to create a database
ser10 and set the
appropriate
db_url. I get the error when using the new
database schema.
>From: Michal Matyska <michal(a)iptel.org>
>To: SER LIST <sergrp(a)hotmail.com>om>, serusers(a)lists.iptel.org
>Subject: Re: [Serusers] SER pre-release - PRESENCE ISSUES
>Date: Sun, 12 Nov 2006 11:47:22 +0100
>
>Yes, the db schema has changed a lot since 0.9.x. You'll need to create
>the new one using the ser_mysql.sh reinstall.
>
>Or if you have lot of data provisioned, wait a moment, upgrade script
>might be under construction.
>
>If you still want to try the new version, then run:
>ser_mysql.sh -n ser010 reinstall
>(it will create new database called ser010) and change db_url in your
>new ser.cfg to "mysql://ser:heslo@127.0.0.1/ser010".
>
>
>Michal
>
>On Sat, 2006-11-11 at 19:35 -0500, SER LIST wrote:
> > Thank you. But now when I use the new syntax lookup_domain("$fd",
> > "(a)from.uri.host") OR
> > lookup_domain("$td", "(a)ruri.host")
> >
> > I get the following error:
> >
> > ----------------------------
> > /usr/local/sbin/ser[31115]: register_udomain(): Invalid table
version
>(use
> > ser_mysql.sh reinstall)
> > /usr/local/sbin/ser[31115]: domain_fixup(): Error while registering
>domain
> > /usr/local/sbin/ser[31115]: ERROR: fix_expr : fix_actions error
> > -----------------------------
> >
> > And when I comment those lines, ser starts fine!!!
> >
> > Any suggestions.
> >
> > Thanks
> >
> >
> >
> > >From: Michal Matyska <michal(a)iptel.org>
> > >To: serusers(a)lists.iptel.org
> > >Subject: Re: [Serusers] SER pre-release - PRESENCE ISSUES
> > >Date: Fri, 10 Nov 2006 20:40:13 +0100
> > >
> > >You can find some ideas in the new ser.cfg (on CVS).
> > >
> > >It seems to be little bit inconsistent to have
lookup_user("from")
but
> > >not
lookup_domain("from"). I'd like to see either both or neither.
:-)
> > >
> > >To set attr called "did" and load domain attrs (if allowed by
modparam)
> > >use:
> > >lookup_domain("$fd", "(a)from.uri.host")
> > >lookup_domain("$td", "(a)ruri.host")
> > >
> > >To set attr called "uid" use:
> > >www_authenticate() - see new ser.cfg or
> > >lookup_user("From") or lookup_user("$fu",
"(a)from.uri")
> > >
> > >lookup_user("To") or lookup_user("$tu",
"(a)to.uri")
> > >lookup_user("Request-URI") or lookup_user("$tu",
"@ruri")
> > >
> > >
> > >To load attr for that user
> > >load_attrs("$fu","$f.uid")
> > >load_attrs("$tu","$t.uid")
> > >
> > >Michal
> > >
> > >On Fri, 2006-11-10 at 13:42 -0500, SER LIST wrote:
> > > > Thank you. settig the xcap_root for the xcap module fixed the
two
>errors
> > > > relating to xcap_root.
> > > >
> > > > BUT I am still getting the two errors relating to the
lookup_domain
> > >command,
> > > > namely:
> > > >
> > > > -------------------------------------
> > > > ser: parse error (192,24-25): unknown command, missing
loadmodule?
> > > > ser: parse error (261,26-27):
unknown command, missing
loadmodule?
> > > > ser: ERROR: bad config file
(2 errors)
> > > > ser startup failed
> > > > ----------------------------------
> > > >
> > > > I am using the presence example file. The excerpt from my
ser.cfg
>file
> > >is (I
> > > > have marked the LINES where the error occurs):
> > > >
> > > > ---- start ---
> > > >
> > > > loadmodule "/usr/local/lib/ser/modules/sl.so"
> > > > loadmodule "/usr/local/lib/ser/modules/avp.so"
> > > > loadmodule "/usr/local/lib/ser/modules/avpops.so"
> > > > loadmodule "/usr/local/lib/ser/modules/tm.so"
> > > > loadmodule "/usr/local/lib/ser/modules/rr.so"
> > > > loadmodule "/usr/local/lib/ser/modules/maxfwd.so"
> > > > loadmodule "/usr/local/lib/ser/modules/usrloc.so"
> > > > loadmodule "/usr/local/lib/ser/modules/registrar.so"
> > > > loadmodule "/usr/local/lib/ser/modules/domain.so"
> > > > loadmodule "/usr/local/lib/ser/modules/textops.so"
> > > > loadmodule "/usr/local/lib/ser/modules/mysql.so"
> > > > loadmodule "/usr/local/lib/ser/modules/dialog.so"
> > > > loadmodule "/usr/local/lib/ser/modules/rls.so"
> > > > loadmodule "/usr/local/lib/ser/modules/pa.so"
> > > > loadmodule "/usr/local/lib/ser/modules/xcap.so"
> > > > loadmodule "/usr/local/lib/ser/modules/presence_b2b.so"
> > > > loadmodule "/usr/local/lib/ser/modules/uri.so"
> > > > loadmodule "/usr/local/lib/ser/modules/uri_db.so"
> > > > loadmodule "/usr/local/lib/ser/modules/fifo.so"
> > > > loadmodule "/usr/local/lib/ser/modules/xmlrpc.so"
> > > > loadmodule "/usr/local/lib/ser/modules/xlog.so"
> > > > loadmodule "/usr/local/lib/ser/modules/auth.so"
> > > > loadmodule "/usr/local/lib/ser/modules/auth_db.so"
> > > > loadmodule "/usr/local/lib/ser/modules/msilo.so"
> > > >
> > > >
> > > > { LINES TRUNCATED}
> > > >
> > > >
> > > > if (uri==myself) {
> > > >
> > > > if (!lookup_domain("To")) {
><--------------------------
> > > > LINE 192
> > > >
> > > > xlog("L_ERR", "Unknown domain
to: %tu
from:
> > >%fu\n");
> > > > route(1);
> > > > break;
> > > > }
> > > >
> > > > if (method=="SUBSCRIBE") {
> > > > if (!t_newtran()) {
> > > > sl_reply_error();
> > > > break;
> > > > };
> > > >
> > > >
> > > > (lines truncated)
> > > >
> > > > if (lookup_domain("From")) { <----------------------
LINE
261
> > > >
> > > > if
>(lookup_user("From"))
> > >{
> > > >
> > > > if
> > > > (is_simple_rls_target("$uid-list")) {
> > > >
#
>log(1,
> > >"it
> > > > is simple subscription!\n");
> > > >
#
>takes
> > >From
> > > > UID and makes XCAP query for user's
> > > >
#
>list
> > >named
> > > > "default"
> > > >
> > > >
if
> > > >
(!query_resource_list("default")) {
> > > >
> > > > t_reply("404", "No such user list");
> > > >
> > > > break;
> > > >
}
> > > >
}
> > > > }
> > > > }
> > > >
> > > > ----------- END ---------------------
> > > >
> > > > Any suggestions??
> > > >
> > > > THanks in advance
> > > >
> > > >
> > > >
> > > >
> > > >
> > > >
> > > >
> > > > >From: samuel <samu60(a)gmail.com>
> > > > >To: "SER LIST" <sergrp(a)hotmail.com>
> > > > >CC: serusers(a)iptel.org, serdev(a)iptel.org
> > > > >Subject: Re: [Serusers] SER pre-release - PRESENCE ISSUES
> > > > >Date: Fri, 10 Nov 2006 10:14:17 +0100
> > > > >
> > > > >XCAP parameters where removed from rls and pa and a new module,
>called
> > > > >xcap contains the xcap root so you have to delete pa and rls
xcap
> > > > >parameter, load the new
module xcap.so and set the xcap_root
>parameter
> > > > >of xcap module to the directory having the doc structure.
> > > > >
> > > > >About the lookup_domain, there can be a typo. Can you post the
>config
> > > > >file syntax??
> > > > >
> > > > >Hope it helps!
> > > > >
> > > > >Samuel
> > > > >
> > > > >2006/11/10, SER LIST <sergrp(a)hotmail.com>om>:
> > > > >>I installed the SER pre-release along w/ all modules. The
problem
>is
> > >that
> > > > >>presence now does not run (it was working w/ the
> > >presence-release-10.99).
> > > > >>The errors I get are:
> > > >
> > >
>
>----------------------------------------------------------------------------------------------------------
> > > > >>set_mod_param_regex: parameter <xcap_root> not found in
module
><rls>
> > > > >>ser: parse error (82,20-21): Can't set module parameter
> > > > >>set_mod_param_regex: parameter <auth_xcap_root> not
found in
>module
> > ><pa>
> > > > >>parse error (97,20-21): Can't set module parameter
> > > > >>ser: parse error (186,24-25): unknown command, missing
loadmodule?
> > > > >>parse error
(255,26-27): unknown command, missing loadmodule?
> > > > >>ERROR: bad config file (4 errors)
> > > >
> > >
>
>-------------------------------------------------------------------------------------------------------------
> > > > >>I checked the pa module code and also the rls code and the
>parameters
> > > > >>auth_xcap_root and xcap_root are NOT defined !!!!
> > > > >>
> > > > >>The error on line 185 and 255 refer to the
"Lookup_domain"
>function. I
> > > > >>verified that the domain module has been compiled and
included
in
>the
> > > > >>ser.cfrg file
> > > >
> > > >
_________________________________________________________________
> > > > Ready for the world's
first international mobile film festival
> > >celebrating
> > > > the creative potential of today's youth? Check out Mobile Jam
Fest
for
_________________________________________________________________
Ready for the world's first international mobile film festival >your
>
a chance to WIN $10,000!
www.mobilejamfest.com
> >
> > _______________________________________________
> > Serusers mailing list
> > Serusers(a)lists.iptel.org
> > http://lists.iptel.org/mailman/listinfo/serusers
>
>_______________________________________________
>Serusers mailing list
>Serusers(a)lists.iptel.org
>http://lists.iptel.org/mailman/listinfo/serusers
_________________________________________________________________
Say hello to the next generation of Search. Live Search try it now.
http://www.live.com/?mkt=en-ca the creative potential of today's youth?
Check out Mobile Jam Fest for
your
a chance to WIN $10,000! www.mobilejamfest.com