16 Mar
2005
16 Mar
'05
3:21 p.m.
That's what I have. I'm not sure what the setflag(1) is for, but then
again, I cannot see the entire ser.cfg.
Regards,
Paul
On Wed, 16 Mar 2005 10:20:41 -0400, Ricardo Martinez
<rmartinez(a)redvoiss.net> wrote:
Hello Paul.
I have the next lines for ending media session:
if (loose_route()) {
if (method=="BYE" || method=="CANCEL") {
end_media_session();
setflag(1);
};
t_relay();
break;
};
Is this ok?. I got the idea from a ser.cfg file in the forum. I'm not so
sure if this is correct.
Can someone help me here?
Thanks again!
Regards,
Ricardo
-----Mensaje original-----
De: Java Rockx [mailto:javarockx@gmail.com]
Enviado el: Martes, 15 de Marzo de 2005 21:03
Para: serusers(a)lists.iptel.org
Asunto: Re: [Serusers] Mediaproxy consuming RAM resources.
Yes that could help, but if you're experiencing pleny of "idle" RTP
connections then you are probably not ending your media sessions with
end_media_session().
Regards,
Paul
On Tue, 15 Mar 2005 18:33:19 -0600, Alberto Cruz
<acruz(a)tekbrain.com> wrote:
If you are running RedHat 9 and Python 3.2.5 may
be this
could help you:
http://www.python.org/download/download_linux.html
Regards
Alberto Cruz
Ricardo Martinez wrote:
Hello. Returning to this subject. I upgraded to the new
mediaproxy version.
1.2.1, but i still have the same problem. I
detected a
increasing amount of
RAM memory used by mediaproxy. I don't know
what's
happening. Is this
something maybe related to the way i tear dow the
session,
i'm still confuse
with so many IDLE session in my mediaproxy. Can
this be the
cause of the
increasing amount of RAM memory used? Also, is
there a way
to debug the
mediaproxy? or something that help me to
understand what's
going on? Any
help would be appreciated. Thanks Ricardo.-
-----Mensaje original----- De: Java Rockx
[mailto:javarockx@gmail.com]
Enviado el: Viernes, 11 de Marzo de 2005 15:23
Para:
Ricardo Martinez CC:
serusers(a)lists.iptel.org Asunto: Re: [Serusers]
Mediaproxy consuming RAM
resources. I'm tearing down my sessions the same way you
showed in your
first email. So AFAIK, that is OK. Regards, Paul
On Fri, 11 Mar 2005
16:15:38 -0400, Ricardo Martinez <rmartinez(a)redvoiss.net> wrote:
Paul, I was thinking the same, maybe that's the problem.
What about the
tear down of the sessions? Thanks! Regards,
Ricardo.-
-----Mensaje original----- De: Java Rockx
[mailto:javarockx@gmail.com]
Enviado el: Viernes, 11 de Marzo de 2005 15:09
Para:
Ricardo Martinez CC:
serusers(a)lists.iptel.org Asunto: Re: [Serusers]
Mediaproxy consuming RAM
resources. Ricardo, I think the release notes on
mediaproxy-1.2 say that
some resource leaks have been fixed. Perhaps you
can try version 1.2
Regards, Paul On Fri, 11 Mar 2005 16:01:59 -0400, Ricardo Martinez
<rmartinez(a)redvoiss.net> wrote:
Hello list. I was looking the process in my SER sip-proxy with the
mediaproxy running.
Every time i look, the percetage of used RAM is
increasing. It seems like
for some reason mediaproxy is not releasing the
resources
used in RAM. You
can look this in the next lines : PID USER PRI
NI SIZE RSS
SHARE STAT %CPU
%MEM TIME CPU COMMAND
1952 root 15 0 284M 266M 1628 S 0.0 26.4 19:22 0
mediaproxy.py Can someone tell me if this is a bug of
mediaproxy or maybe a
missconfiguration in my ser.cfg? I want to ask a
question
regarding to tear
down sessions with mediaproxy
also. In my ser.cfg i have : if (loose_route()) { if
(method=="BYE" ||
method=="CANCEL") { log(1, "NAT:
BYE o CANCEL recibido -->
terminando la
sesion de media\n"); end_media_session();
setflag(1); };
t_relay(); break;
}; Is this ok? I think in some cases (i'm
still unable to
determine which
ones), SER does not tear down a mediaproxy
session. You
can see for example
this two session, both of them were ended, but
it seems to
be active even
before that. (i ommited the source, via and
destination
IP's in the output
of the session.py) Status Duration Codec Type
Traffic
--------------------------------------------------------------
--------------
--- hold (2430) 40'40" G729 Audio 11.53k/29.58k/18.45k
inactive
0'02"
Unknown Audio 0/0/0 Can someone tell me
what's happening?
I'm runnig : [root
mediaproxy]# ./mediaproxy.py --version
mediaproxy.py 1.0
Thanks in advance.
Regards, Ricardo M.
_______________________________________________ Serusers
mailing list serusers(a)lists.iptel.org
http://lists.iptel.org/mailman/listinfo/serusers
_______________________________________________ Serusers
mailing list
serusers(a)lists.iptel.org
http://lists.iptel.org/mailman/listinfo/serusers
_______________________________________________
Serusers mailing list
serusers(a)lists.iptel.org
http://lists.iptel.org/mailman/listinfo/serusers
_______________________________________________
Serusers mailing list
serusers(a)lists.iptel.org
http://lists.iptel.org/mailman/listinfo/serusers