Re: [SR-Users] How to setup Kamailio as P-CSCF/S-CSCF/I-CSCF

Thanks a lot Muhammad Shahzad. I hope you want me to do ln -s */usr/local/src/kamailio-4.2.0/examples/pcscf/pcscf.cfg kamailio.cfg* My understanding is that kamailio.cfg will just be a file pointing to pcscf.cfg So the configuration that Kamailio-PCSCF server will get is basically from pcscf.cfg. I checked pcscf.cfg file, and content is quite less (I have copy/pasted here below). There is no request/response routing logic etc in pcscf.cfg. Is that fine or we are missing something. Kindly clarify. *pcscf.cfg content* *# IP-Adress for incoming SIP-Traffic, in the following format:# SIP / UDPlisten=udp:109.239.57.200:5060 <http://109.239.57.200:5060>listen=tcp:109.239.57.200:5060 <http://109.239.57.200:5060># SIP / TCP (Monitoring)listen=tcp:127.0.0.1:5060 <http://127.0.0.1:5060># SIP / TCP/TLS#listen=tls:109.239.57.200:5061 <http://109.239.57.200:5061># SIP / Websocket#listen=tcp:109.239.57.200:80 <http://109.239.57.200:80># SIP / Websocket/TLS#listen=tls:109.239.57.200:443 <http://109.239.57.200:443>alias=pcscf-1.imscore.org <http://pcscf-1.imscore.org>alias=pcscf.imscore.org <http://pcscf.imscore.org>alias=proxy.imscore.org <http://proxy.imscore.org>#alias=tls:"wss-proxy.imscore.org <http://wss-proxy.imscore.org>":443# Port, where we listen to Traffic#!define PORT 5060#!subst "/NETWORKNAME/imscore.org/ <http://imscore.org/>"#!subst "/HOSTNAME/pcscf-1.imscore.org/ <http://pcscf-1.imscore.org/>"#!define HOSTNAME_IP pcscf-1.imscore.org <http://pcscf-1.imscore.org>#!define HOSTNAME_ESC "pcscf-1\.imscore\.org"# SIP-Address of capturing node, if not set, capturing is disabled.#!define CAPTURE_NODE "sip:10.1.8.55"# Allowed IPs for XML-RPC-Queries#!define XMLRPC_WHITELIST_1 "127.0.0.1"##!define XMLRPC_WHITELIST_2 "127.0.0.1"##!define XMLRPC_WHITELIST_3 "127.0.0.1"# Databases:#!define DB_URL "mysql://pcscf:heslo@192.168.5.1/pcscf <http://pcscf:heslo@192.168.5.1/pcscf>"##!define DB_URL "con1=>mysql://pcscf:heslo@192.168.5.1/pcscf <http://pcscf:heslo@192.168.5.1/pcscf>"##!define DB_URL2 "con2=>mysql://pcscf:heslo@10.1.27.217/pcscf <http://pcscf:heslo@10.1.27.217/pcscf>"#! Optional: Server-URL for Websocket-Requests##!define WEBSOCKET_WEBSERVER "phone.imscore.org <http://phone.imscore.org>"# IP-Adress(es) of the RTP-Proxy##!define RTPPROXY_ADDRESS "udp:10.1.2.186:22222 <http://10.1.2.186:22222> udp:10.1.27.217:22222 <http://10.1.27.217:22222>"#!define RTPPROXY_ADDRESS "udp:10.1.2.186:22222 <http://10.1.2.186:22222>"## Several features can be enabled using '#!define WITH_FEATURE' directives:## *** To run in debug mode:# - define WITH_DEBUG## *** To enable nat traversal execute:# - define WITH_NAT# - define the connection to the RTP-Proxy: RTPPROXY_ADDRESS## *** To force alls calls through the RTP-Proxy# - this will automagically enable NAT-Traversal# - define FORCE_RTPRELAY## *** To enable IPv4/IPv6 Translation (RTPProxy)# - this will automagically enable NAT-Traversal# - define WITH_RTPIPV4## *** To enable TCP support execute:# - define WITH_TCP## *** To enable TLS support execute:# - adjust CFGDIR/tls.cfg as needed# - define WITH_TLS# - this will automagically enable TCP## *** To enable XMLRPC support execute:# - define WITH_XMLRPC# - this will automagically enable TCP## *** To enable anti-flood detection execute:# - adjust pike and htable=>ipban settings as needed (default is# block if more than 16 requests in 2 seconds and ban for 300 seconds)# - define WITH_ANTIFLOOD## *** To enable the Rx-Interface:# - Configure Rx-Diameter-Interface in pcscf.xml# - define WITH_RX## *** To enable a Homer SIP-Capter-Node:# - define CAPTURE_NODE with a proper address## *** To enable support for the SEMS-SBC# - define WITH_SBC# - configure dispatcher-list with a set of SBC's## *** To enable support for Websocket# - define WITH_WEBSOCKET# - this will automagically enable TCP## Enabled Features for this host:##!define WITH_DEBUG#!define WITH_NAT#!define FORCE_RTPRELAY##!define WITH_TLS#!define WITH_XMLRPC#!define WITH_ANTIFLOOD##!define WITH_RX##!define WITH_TCP#!define WITH_SBC##!define WITH_WEBSOCKET#!define WITH_IMS_HDR_CACHE#!define WITH_NATPING* On Mon, Oct 27, 2014 at 4:58 PM, Muhammad Shahzad &lt;shaheryarkh(a)gmail.com&gt; wrote: