[SR-Users] Removing extra Connection information in SDP

Hello I have a problem with some phone numbers at Telenor. Our door telephone does not reply with an ACK on the 200 OK. All I found was a weird SDP response with two "connection information" lines Session Description Protocol     Session Description Protocol Version (v): 0     Owner/Creator, Session Id (o): BroadWorks 307119541 1 IN IP4 194.247.61.31     Session Name (s): -     Connection Information (c): IN IP4 194.247.61.31     Time Description, active time (t): 0 0     Session Attribute (a): sendrecv     Media Description, name and address (m): audio 23116 RTP/AVP 8 101     Connection Information (c): IN IP4 194.247.61.31     Media Attribute (a): rtpmap:8 PCMA/8000     Media Attribute (a): rtpmap:101 telephone-event/8000     Media Attribute (a): fmtp:101 0-15     Media Attribute (a): maxptime:40     Media Attribute (a): bsoft:1 image udptl t38     Media Attribute (a): sendrecv     Media Attribute (a): silenceSupp:off - - - -     Media Attribute (a): setup:actpass To debug, I would like to remove one of the "Connection Information (c): IN IP4 194.247.61.31", to see if this is what confuses the door telephone. But how do I do that? I tried with this but nothing happeded onreply_route[DOOR_MANAGE_REPLY] {         if (is_method("INVITE|SUBSCRIBE"))         {           sdp_remove_line_by_prefix("c=IN IP4 194");         }         return 1; } -- --------------------- Med Liberalistiske Hilsner ---------------------- Civilingeniør, Kjeld Flarup - Mit sind er mere åbent end min tegnebog Sofienlundvej 6B, 7560 Hjerm, Tlf: 40 29 41 49 Den ikke akademiske hjemmeside for liberalismen -www.liberalismen.dk <http://www.liberalismen.dk>