Hello,
On 9/7/11 12:49 AM, David Zambrano wrote:
Ok so It now includes the record-route but its still not modifying the contact header and the problem persists. ¿Any suggestions as to how to do that?
for updating the contact header you have to use nathelper module with fix_natted_contact(). Be sure you set the tcp connection lifetime reasonably high to be safe during a call, avoiding a need to reconnect behind nat, which is not possible: http://www.kamailio.org/dokuwiki/doku.php/core-cookbook:3.1.x#tcp_connection...
I recommend you start from default config file for 3.1, strip the part with user auth, location, rtp proxy ... and plug in the dispatcher stuff. You have there proper record routing and nat traversal handling.
A more recent dispatcher config is available at:
http://kamailio.org/docs/modules/devel/modules_k/dispatcher.html#id2522847
It shows serial forking.
Cheers, Daniel
Cheers
David
On 2 September 2011 21:17, David Zambranodzambrano@gmail.com wrote:
Thanks Andrew Ill deal with the ping config once I resolve the route problem.
So now this is my config: route{
if (method != "REGISTER") loose_route();
if (is_method("INVITE")) record_route();
ds_select_dst("2", "4"); t_relay();}
Now I can see in the sip headers that it is in fact adding the record-route properly with the correct ip address of the loadbalancer and the transport=tcp tag but the problem for incoming calls still presents itself. The transcoder is still trying to reach the softphone directly skipping the loadbalancer. Any ideas why would this still happen? Or did I just screw up the config and oversimplified it?
Thanks again
David
On 2 September 2011 17:04, Andrew Pogrebennykapogrebennyk@sipwise.com wrote:
On 09/02/2011 10:33 PM, David Zambrano wrote:
Hi andrew. Thanks for your help. What module or config should I use to make sure the connection goes back through the loadbalancer?
That's simply the task for record-route like:
if (is_method("INVITE")) record_route();
But you also need the loose_route for routing new in-dialog requests.
For the failover I didnt specify anything ping related. Im using the dispatcher module. Can I specify the ping config in that module or should I use another module for that?
yes, it's in the documentation of dispatcher module: http://kamailio.org/docs/modules/3.1.x/modules_k/dispatcher.html#id2806108
route{ ds_select_dst("2", "4"); t_relay(); }
well, with such config the chances are that the subsequent BYE may arrive at the different server than the INVITE, so again you need the loose_route section for this. You should get familiar with the default config file to get a feeling of things.
Regards, Andrew
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list sr-users@lists.sip-router.org http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list sr-users@lists.sip-router.org http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users