Hi I am getting "ERROR: bad config file (1 errors)" while truing to
execute the SER.
And I could not figure out whats wrong with this line loadmodule
"/usr/local/lib/ser/modules/mysql.so"
If I comment it then everything is file.
Following is my ser.cfg file
---------------------------------ser.cfg
star------------------------------
#
# $Id: ser.cfg,v 1.25.2.1 2005/02/18 14:30:44 andrei Exp $ # # simple
quick-start config script #
# ----------- global configuration parameters ------------------------
debug=3 # debug level (cmd line: -dddddddddd)
fork=yes
log_stderror=no # (cmd line: -E)
listen=192.87.41.149 #this address has been changed
# hostname matching an alias will satisfy the condition uri==myself".
alias=sip.myserver.com
/* Uncomment these lines to enter debugging mode fork=no
log_stderror=yes */
#check_via=no # (cmd. line: -v)
dns=no # (cmd. line: -r)
rev_dns=no # (cmd. line: -R)
port=5060
children=4
fifo="/tmp/ser_fifo"
fifo_db_url="mysql://ser:heslo@localhost/ser"
# ------------------ module loading ----------------------------------
# Uncomment this if you want to use SQL database loadmodule
"/usr/local/lib/ser/modules/mysql.so"
loadmodule "/usr/local/lib/ser/modules/sl.so"
loadmodule "/usr/local/lib/ser/modules/tm.so"
loadmodule "/usr/local/lib/ser/modules/rr.so"
loadmodule "/usr/local/lib/ser/modules/maxfwd.so"
loadmodule "/usr/local/lib/ser/modules/usrloc.so"
loadmodule "/usr/local/lib/ser/modules/registrar.so"
loadmodule "/usr/local/lib/ser/modules/textops.so"
loadmodule "/usr/local/lib/ser/modules/uri_db.so" #added by mukesh
# Uncomment this if you want digest authentication # mysql.so must be
loaded !
loadmodule "/usr/local/lib/ser/modules/auth.so"
loadmodule "/usr/local/lib/ser/modules/auth_db.so"
# ----------------- setting module-specific parameters ---------------
# -- usrloc params --
modparam("usrloc", "db_url", "mysql://ser:heslo@localhost/ser") #added
by mukesh
modparam("usrloc", "db_mode", 0)
# Uncomment this if you want to use SQL database # for persistent
storage and comment the previous line modparam("usrloc", "db_mode", 2)
# -- auth params --
# Uncomment if you are using auth module # modparam("auth_db",
"calculate_ha1", yes) # # If you set "calculate_ha1" parameter to yes
(which true in this config), # uncomment also the following parameter)
# modparam("auth_db", "password_column", "password")
# -- rr params --
# add value to ;lr param to make some broken UAs happy #modparam("rr",
"enable_full_lr", 1)
# ------------------------- request routing logic -------------------
# main routing logic
route{
# initial sanity checks -- messages with
# max_forwards==0, or excessively long requests
if (!mf_process_maxfwd_header("10")) {
sl_send_reply("483","Too Many Hops");
break;
};
if (msg:len >= 2048 ) {
sl_send_reply("513", "Message too big");
break;
};
# we record-route all messages -- to make sure that
# subsequent messages will go through our proxy; that's
# particularly good if upstream and downstream entities
# use different transport protocol
if (!method=="REGISTER") record_route();
# subsequent messages withing a dialog should take the
# path determined by record-routing
if (loose_route()) {
# mark routing logic in request
append_hf("P-hint: rr-enforced\r\n");
route(1);
break;
};
if (!uri==myself) {
# mark routing logic in request
append_hf("P-hint: outbound\r\n");
route(1);
break;
};
# if the request is for other domain use UsrLoc
# (in case, it does not work, use the following command
# with proper names and addresses in it)
if (uri==myself) {
if (method=="REGISTER") {
# Uncomment this if you want to use digest authentication
if (!www_authorize("sip.myserver.com",
"subscriber")) {
www_challenge("ser.hungama.com", "0");
break;
};
save("location");
break;
};
lookup("aliases");
if (!uri==myself) {
append_hf("P-hint: outbound alias\r\n");
route(1);
break;
};
# native SIP destinations are handled using our USRLOC DB
if (!lookup("location")) {
sl_send_reply("404", "Not Found");
break;
};
};
append_hf("P-hint: usrloc applied\r\n");
route(1);
}
route[1]
{
# send it out now; use stateful forwarding as it works reliably
# even for UDP2TCP
if (!t_relay()) {
sl_reply_error();
};
}
---------------------------------ser.cfg
ends------------------------------
Any help/suggestion is highly appreciated.
Regards
Mukesh
_______________________________________________
Serusers mailing list
Serusers@lists.iptel.org
http://lists.iptel.org/mailman/listinfo/serusers