Re: [OpenSER-Users] OpenSer and FreeRadius implementation

Please give me a bit more credit than that, I had been using Linux for the past 10 years ;-) Although, from my previous questions, one can easily assume I'm a linux newbie :-D Z2L ----- Original Message ----- From: "raviprakash sunkara" &lt;sunkara.raviprakash.feb14(a)gmail.com&gt; To: openser(a)zap2link.com Sent: Wednesday, July 18, 2007 10:59:06 AM (GMT+0200) Asia/Jerusalem Subject: Re: [OpenSER-Users] OpenSer and FreeRadius implementation hi oops this versio is working fine did u try ldconfig v , to load the library files On 7/18/07 , OpenSer ML < openser(a)zap2link.com > wrote: Hi Neeraj, Can you please specify the versions of OpenSER and FreeRadius you are using? I'm trying to use OpenSER 1.2.1 and FreeRadius 1.1.6 Regards, Z2L ----- Original Message ----- From: "Neeraj Gupta" < Neeraj.Gupta(a)Sun.COM > To: openser(a)zap2link.com Cc: "users" < users(a)openser.org > Sent: Wednesday, July 18, 2007 1:20:11 AM (GMT+0200) Asia/Jerusalem Subject: Re: [OpenSER-Users] OpenSer and FreeRadius implementation Ok, I will paste critical configs in email. You need to setup radius as usual and copy dictionary files as usual. /etc/openser.cfg: # # $Id$ # # radius config script # # ----------- global configuration parameters ------------------------ debug=0 # debug level (cmd line: -dddddddddd) fork=yes log_stderror=no # (cmd line: -E) check_via=no # (cmd. line: -v) dns=no # (cmd. line: -r) rev_dns=no # (cmd. line: -R) port=5060 children=4 listen=udp:yy.yy.yy.yy listen=udp:xx.xx.xx.xx alias= sfbay.sun.com avp_aliases="day=i:101;time=i:102" #fifo="/tmp/openser_fifo" # ------------------ module loading ---------------------------------- #mpath="/usr/local/openser-1.0.1/lib/openser/modules" mpath="/usr/local/lib64/openser/modules" #loadmodule "mysql.so" loadmodule "sl.so" loadmodule "tm.so" loadmodule "rr.so" loadmodule "maxfwd.so" loadmodule "avpops.so" loadmodule "usrloc.so" loadmodule "registrar.so" loadmodule "textops.so" loadmodule "xlog.so" loadmodule "uri.so" loadmodule " acc.so" loadmodule "auth.so" loadmodule "auth_radius.so" loadmodule "group_radius.so" loadmodule "avp_radius.so" # ----------------- setting module-specific parameters --------------- # -- usrloc params -- #modparam("usrloc","db_url","mysql://openser:openserrw@localhost/openser") # neeraj changed to 0 from 2 modparam("usrloc", "db_mode", 0) # -- acc params -- modparam("acc", "radius_flag", 1) modparam("acc", "radius_missed_flag", 2) modparam("acc", "log_flag", 1) modparam("acc", "log_missed_flag", 1) modparam("acc", "service_type", 15) modparam("acc", "radius_extra", "Sip-Src-IP=$si;Sip-Src-Port=$sp") modparam("acc|auth_radius|group_radius|avp_radius", "radius_config", "/etc/radiusclient-ng/radiusclient.conf") # -- group_radius params -- modparam("group_radius", "use_domain", 1) # -- rr params -- # add value to ;lr param to make some broken UAs happy modparam("rr", "enable_full_lr", 1) # ------------------------- request routing logic ------------------- # main routing logic route{ # initial sanity checks -- messages with # max_forwards==0, or excessively long requests if (!mf_process_maxfwd_header("10")) { sl_send_reply("483","Too Many Hops"); }; if (msg:len >= 2048 ) { sl_send_reply("513", "Message too big"); }; # check if user is suspended ###if(is_method("REGISTER|INVITE|MESSAGE|OPTIONS|SUBSCRIBE")) { ### if (radius_is_user_in("From", "suspended")) { ### sl_send_reply("403", "Forbidden - suspended"); ### exit; ### }; ###}; # we record-route all messages -- to make sure that # subsequent messages will go through our proxy; that's # particularly good if upstream and downstream entities # use different transport protocol if (!method=="REGISTER") record_route(); # subsequent messages withing a dialog should take the # path determined by record-routing if (loose_route()) { # mark routing logic in request append_hf("P-hint: rr-enforced\r\n"); if(is_method("BYE")) { # log it all the time acc_rad_request("200 ok"); acc_log_request("200 ok"); } route(1); }; if(is_method("INVITE") && !has_totag()) { # set the acc flags setflag(1); setflag(2); }; if (!uri==myself) { # check if user is allowed to do voip calls to other domains if(is_method("INVITE|MESSAGE")) { if (!radius_is_user_in("From", "voip")) { sl_send_reply("403", "Forbidden VoIP"); exit; }; }; # mark routing logic in request append_hf("P-hint: outbound\r\n"); route(1); }; # if the request is for other domain use UsrLoc # (in case, it does not work, use the following command # with proper names and addresses in it) if (uri==myself) { # authenticate registers if (method=="REGISTER") { if (!radius_www_authorize("")) { www_challenge("", "1"); exit; }; # check the src ip address # no need to use this now. tested OK ###if(!avp_check("$avp(i:2)", "eq/$src_ip/ig")) { ### sl_send_reply("403", "Forbidden IP"); ### exit; ###}; save("location"); exit; }; # calls to pstn if(uri=~"sip:00[1-9][0-9]+@") { if(is_method("INVITE") && !has_totag()) { if (!radius_is_user_in("From", "pstn")) { sl_send_reply("403", "Forbidden PSTN"); exit; }; }; # set gateway address rewritehostport(" 10.10.10.10:5090 "); route(1); }; # native SIP destinations are handled using our USRLOC DB if (!lookup("location")) { # log to acc as missed call acc_rad_request("404 Not Found"); acc_log_request("404 Not Found"); sl_send_reply("404", "Not Found"); exit; }; append_hf("P-hint: usrloc applied\r\n"); }; route(1); } # generic forward route[1] { # send it out now; use stateful forwarding as it works reliably # even for UDP2TCP if (!t_relay()) { sl_reply_error(); }; exit; } /etc/radiusclient-ng/servers: xx.xx.xx.xx test1234 yy.yy.yy.yy test1234 /etc/radiusclient-ng/radiusclient.conf: <snip> # neeraj authserver xx.xx.xx.xx:1812 # RADIUS server to use for accouting requests. All that I # said for authserver applies, too. # # neeraj #acctserver localhost acctserver xx.xx.xx.xx :1813 <snip> Neeraj Gupta wrote: Yes. I have this working.. all with latest pieces of software on Sun SPARC Solaris 10. What exactly do you need ? -Neeraj OpenSER ML wrote: Hi All, Ok, I'm a bit mixed up here, the documents are simply not cutting it. I'm wondering if any of you have a working OpenSER + FreeRadius configuration that I can look at and extrapulate my required settings? I've gone over all the material I could find, but all of it reverts back to the outdated how-to on the FreeRadius website. Assistance would be highly appreciated. Regards, Z2L _______________________________________________ Users mailing list Users(a)openser.org http://openser.org/cgi-bin/mailman/listinfo/users -- ------------------------------------------------------------- o Neeraj Gupta email: neeraj.gupta(a)sun.com o Netra Systems & Networking phone: +1(408) 276-7214 x71214 o Sun Microsystems, Inc. fax : +1(408) 276-4552 o 4120 Network Circle, USCA12-216, Santa Clara, CA 95054, USA ------------------------------------------------------------- _______________________________________________ Users mailing list Users(a)openser.org http://openser.org/cgi-bin/mailman/listinfo/users -- Thanks &Regards Ravi Prakash Sunkara