Re: [Users] Multi-domain setup problem

Hi Everyone, I just added a second domain to my openser box and screwed things up somehow. Maybe someone can help figure out what's going on. I'm using the new onsip config (unmodified except IPs & replacing breaks w/returns). I'm using mediaproxy for NAT. Everything worked properly prior to adding the new domain. I did add the new domain to the domain table, and have loaded the domain module with modparams as follows. modparam("domain", "db_url", "mysql://openser:mypass@myhost/openser") modparam("domain", "db_mode", 1) modparam("domain", "domain_table", "domain") modparam("domain", "domain_col", "domain") Existing domain: sip1.mydomain.com New domain: sip1.mydomain.com user1: X-Lite (behind NAT) private-IP (192.168.x.x) Registers using domain sip1.mydomain.com user2: Linksys PAP2-NA public-IP (same subnet as Utsarcom) Registers using domain sip1.mydomain.com user3: Utstarcom iAN-02EX public-IP (63.225.x.x) Registers using domain sip2.mydomain.com Here is what happens now... - All users can register fine. - user1 & user2 can only receives calls from user3 (can't call others or pstn , 407 Proxy Auth Required) - user3 is the only one who can call others (calls to user1,user2, & pstn are fine) It's probably just something simple I missed, but I can't seem to figure it out. As always, thanks for your assistance. - Daryl _______________________________________________ Users mailing list Users(a)openser.org http://openser.org/cgi-bin/mailman/listinfo/users