Re: [SR-Users] Websockets WSS problem with NOTIFY

** Have you checked to see if there are any known bugs in the browser you are using? As the WebSocket message compression stuff is still draft the browser implementation probably won't be complete or fully tested yet. As I said, the Kamailio WebSocket implementation does not support any extensions and all the reserved bits are 0'd. So I don't think it is likely that the compressed bit is set to 1 at all. The only other thing I can suggest is capturing your TLS traffic with WireShark and importing the certificates into it so you can decode the packets. At that point you should be able to look at the binary of the frame and see if the compressed bit is set or not. Regards, Peter On Thu, 2013-01-24 at 13:45 +0000, Pete Kelly wrote: Hi Peter I can confirm it works correctly for WS and not WSS, and it appears to be only the NOTIFY request in the direction of Kamailio > UAC. INVITE requests in the direction of Kamailio > UAC are fine. I've tried it with the tls tls_disable_compression flag set to both 0 and 1 Pete On 24 January 2013 09:53, Peter Dunkley <peter.dunkley(a)crocodile-rcs.com> wrote: Hi, I've done some checking online and in the code. The compressed bit is defined in draft-ietf-hybi-permessage-compression and uses the RSV1 bit from the WebSocket frame header. As per RFC 6455 the Kamailio WebSocket implementation is careful to leave RSV1, RSV2, and RSV3 with values of 0. As this part of the code is identical for WS and WSS connections can you confirm that it works correctly for WS? Regards, Peter On Thu, 2013-01-24 at 09:09 +0000, Peter Dunkley wrote: I shod also add that the Kamailio WebSocket implementation does not support any extensions. So unless the deflate frame extension is implicit for TLS it will not be negotiated. Further, the implementation does not set any compressed bits and all unused flags etc should be zeroed automatically - but I will look at the code later. Peter On 24 Jan 2013, at 09:05, Peter Dunkley <peter.dunkley(a)crocodile-rcs.com> wrote: I am not sure how to investigate this. It sounds like it might be a TLS related problem (or a WebSocket/TLS interworking problem in Kamailio). I don't know anything about the Kamailio TLS implementation - I just drop WebSocket frames into it as required. I did do (a little) WSS testing and saw no problems myself. Regards, Peter On 23 Jan 2013, at 22:12, Pete Kelly <pkelly(a)gmail.com> wrote: Hi, I am having an issue at the moment with SIP NOTIFY messages being sent from Kamailio (latest git master) over wss transport I am getting reports from the receiving end saying "Compressed bit must be 0 if no negotiated deflate-frame extension" The only reference I can find to it is at the following URL... where the problem was caused by the server miscalculating the size of the msg: http://stackoverflow.com/questions/12308728/compressed-bit-must-be-0-when-s… Does anyone have any suggestions as to how I could debug this within Kamailio? It sounds like Kamailio may be sending some incorrect packet information but I am unsure at this point. _______________________________________________ SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list sr-users(a)lists.sip-router.org http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users _______________________________________________ SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list sr-users(a)lists.sip-router.org http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users _______________________________________________ SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing listsr-users@lists.sip-router.orghttp://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users -- Peter Dunkley Technical Director Crocodile RCS Ltd -- Peter Dunkley Technical Director Crocodile RCS Ltd