You have sent the 200 ok - not the REGISTER message. I still think that there will be only 1 Contact in each REGISTER.
Probably the client or/and the NAT is broken:
Which client do you use? Which NAT do you use? Do you use STUN?
klaus
Iqbal wrote:
yup, thats what made me jump,
well hers ngrep of when i get a 200OK
SIP/2.0 200 OK. Via: SIP/2.0/UDP 111.222.333.444:51687;branch=z9hG4bK35d8fac5c0e457cb;rport=50395. From: sip:040686@sip.domain.com;tag=107864afa36620af. To: sip:040686@sip.domain.com;tag=bde2d0f39a3c31098b0c0a337d26256c.e50e. Call-ID: 55e8c488a0336b09@10.0.0.14. CSeq: 101 REGISTER. Contact: sip:040686@111.222.333.444:51687;expires=3600;received="sip:111.222.333.444:50395", sip:040686@111.222.333.444:48934;expires=2998;received="sip:111.222.333.444:50395", sip:040686@111.222.333.444:34201;expires=2680;received="sip:111.222.333.444:50395", sip:040686@111.222.333.444:63368;expires=2352;received="sip:111.222.333.444:55174", sip:040686@111.222.333.444:47768;expires=2164;received="sip:111.222.333.444:37787", sip:040686@111.222.333.444:33650;expires=1360;received="sip:111.222.333.444:40862", sip:040686@111.222.333.444:46754;expires=121;received="sip:111.222.333.444:33159", sip:040686@111.222.333.444:33159;expires=26;received="sip:111.222.333.444:62574".
Content-Length: 0. Warning: 392 123.456.76.87:5060 "Noisy feedback tells: pid=32086 req_src_ip=111.222.333.444 req_src_port=50395 in_uri=sip:sip.domain.com out_uri=sip:sip.domain.com via_cnt==1".
which is what cause me to use serctl to look at location, and I got multiple entries.
Havent a clue why this is/was
iqbal
Klaus Darilion wrote:
Are you sure that they really get created at once? Is there more than 1 Contact in the REGISTER message?
Please post an ngrep dump.
klaus
Iqbal wrote:
the expire times do vary, the thing is they get all created on register at the same time, so I have 4 contacts for a new registers.
Iqbal
Klaus Darilion wrote:
MAybe the NAT binding disappears and a new port will bu used by the NAT device. If you use nathelper, then you will save teh port of the new binding.
Do the contacts vary in their expire time? Yes: NAT problem No: ? client problem?
klaus
Iqbal wrote:
Hi
I have a really strange problem, when I am registering a IP phone, which is connected to a simple 4 port router, it i submitting multiple contacts into the db.
Even in the sip messages I can see multiple entries, the IP:port pairs only differ in the port numbers. Anyone else had this problem,
Iqbal
Serusers mailing list serusers@lists.iptel.org http://lists.iptel.org/mailman/listinfo/serusers
.
.