4 Nov
2008
4 Nov
'08
1:47 p.m.
Hi Klaus,
thanks for your answer - fix_nat_register() works fine, but ...
I forget these two params, yep :
modparam("nathelper", "received_avp", "$avp(i:42)")
modparam("registrar", "received_avp", "$avp(i:42)")
...
if (nat_uac_test("19"))
{
if (method == "REGISTER")
{
xlog("L_INFO","-> fix nat register");
fix_nated_register();
}
else
{
xlog("L_INFO","-> fix nat contact");
fix_nated_contact();
}
xlog("L_INFO","-> NAT involved, set the NAT flag");
setflag(4); # flag nat
$avp(i:803) = 1; # avp uac_nat
}
And when I'm looking the mySQL location table, now it has the received
params with ip:port.
Now, I've to do more tests to be sure about NAT config on my customers
routers.
Many thanks !
.Sam.
On Tue, Nov 4, 2008 at 11:08 AM, Klaus Darilion <
klaus.mailinglists(a)pernau.at> wrote:
looks like you do not perform NAT traversal for
REGISTER request.
do you call fix_nated_register()?
take a look at the location table. The entries should haev the "receive"
column filled with the real source address information.
regards
klaus
Samuel Muller schrieb:
Hello all,
I tried during one week to adapt my old SER configuration file (ser.cfg,
for SER 2.0.0),
who works really great, to Kamailio v1.4.2.
I used to change all the stuff needed (many functions, onsend route, ...
disappeared or was replaced, ...).
That's ok, concepts are the same - registration are ok, NAT (seems to)
works with rtpproxy,
and I'm using radius server (Radiator). MySQL is only here to store
locations, domains,
and trusted stuff like gateways. Everything looks fine (load kamalio : no
pbm, REGISTER, OPTIONS methods and SIP ping ok, ...)
Right now, RTP does not work, and no SIP phone (linksys spa9xx, thomson
st2030, ...) can't call - there's no ringing, even if all the sip phones are
registered and known by OpenSER ...
It seems OpenSER can't send the SIP requests to the callee ???
Did anyone had the same problem and resolved it ?
Or, eventually anyone does have some config sample config file (as you can
have in SER examples stuff) ?
I would like to let here a debug log of a call from a linksys spa942 to a
sjphone but it's a bit enormous (debug log + config file) ...
so i let it in attached file.
the scenario is :
0123451011 (sjphone) calls 0123451012 (linksys spa9xx)
the 2 UACs are on the same LAN, through the same router, with the same
realm.
there're registered and are stored into the location table in mySQL.
but the problem is present in all the case we can have (different realms,
different WAN connections, different SIP UACs ...)
Thanks in advance !
--
Samuel MULLER
------------------------------------------------------------------------
_______________________________________________
Users mailing list
Users(a)lists.kamailio.org
http://lists.kamailio.org/cgi-bin/mailman/listinfo/users