Re: [Serusers] ACC into mysql

Hi all!

Im also receiving this error message.

Can somebody help us on how to make accounting work using mysql.

thanks, ed

At 06:01 AM 4/26/2005, Leon Sun wrote:

Hi, I am using 0.8.12 in Fedora 3. I tried to log account info into Mysql followed instruction from manual. I found, first, "modparam("acc", "db_url", "sql://ser:heslo@localhost/ser")" coudnlt work at all in ser.cfg. If I enabled in cfg file, it showed "Starting ser: ERROR: bad config file (1 errors)"

If I disabled it, SER worked fine but I couldn't see any record in 'acc' table.

Would anyone suggest how to put call records into Mysql?

Thank you.

# ----------- global configuration parameters ------------------------

#debug=3 # debug level (cmd line: -dddddddddd) #fork=yes #log_stderror=no # (cmd line: -E)

/* Uncomment these lines to enter debugging mode debug=7 fork=no log_stderror=yes */

check_via=no # (cmd. line: -v) dns=no # (cmd. line: -r) rev_dns=no # (cmd. line: -R) #port=5060 #children=4 fifo="/tmp/ser_fifo"

# ------------------ module loading ----------------------------------

# Uncomment this if you want to use SQL database loadmodule "/usr/lib/ser/modules/mysql.so"

loadmodule "/usr/lib/ser/modules/acc.so" loadmodule "/usr/lib/ser/modules/sl.so" loadmodule "/usr/lib/ser/modules/tm.so" loadmodule "/usr/lib/ser/modules/rr.so" loadmodule "/usr/lib/ser/modules/maxfwd.so" loadmodule "/usr/lib/ser/modules/usrloc.so" loadmodule "/usr/lib/ser/modules/registrar.so"

# Uncomment this if you want digest authentication # mysql.so must be loaded ! loadmodule "/usr/lib/ser/modules/auth.so" loadmodule "/usr/lib/ser/modules/auth_db.so"

# ----------------- setting module-specific parameters ---------------

#modparam("acc", "db_url", "sql://ser:heslo@localhost/ser")

# -- usrloc params --

#modparam("usrloc", "db_mode", 0)

# Uncomment this if you want to use SQL database # for persistent storage and comment the previous line modparam("usrloc", "db_mode", 2)

# -- auth params -- # Uncomment if you are using auth module # modparam("auth_db", "calculate_ha1", yes) # # If you set "calculate_ha1" parameter to yes (which true in this config), # uncomment also the following parameter) # modparam("auth_db", "password_column", "password")

# -- rr params -- # add value to ;lr param to make some broken UAs happy modparam("rr", "enable_full_lr", 1)

modparam("acc","log_level",1) modparam("acc","log_flag",1) # ------------------------- request routing logic -------------------

# main routing logic

route{

    # initial sanity checks -- messages with
    # max_forwards==0, or excessively long requests
    if (!mf_process_maxfwd_header("10")) {
            sl_send_reply("483","Too Many Hops");
            break;
    };
    if ( msg:len > max_len ) {
            sl_send_reply("513", "Message too big");
            break;
    };

    # we record-route all messages -- to make sure that
    # subsequent messages will go through our proxy; that's
    # particularly good if upstream and downstream entities
    # use different transport protocol
    record_route();
    # loose-route processing
    if (loose_route()) {
            if (method=="BYE") {
               setflag(1);
               setflag(2);
            }

            t_relay();

            break;
    };

    #labeled all transaction for accounting
    setflag(1);
    setflag(2);

    if (method=="CANCEL"){
                            t_relay();
                        };

    # (in case, it does not work, use the following command
    # with proper names and addresses in it)


    if (uri==myself) {

                    # This for PSTN destination

                    if (uri=~"^sip:1")

                    {       rewritehost("10.10.10.10");
                            forward(10.10.10.10,5060);
                            break;
                    }
            if (method=="REGISTER") {

            # Uncomment this if you want to use digest authentication
                    if (!www_authorize("sip.mycommunications.com", 

"subscriber")) { www_challenge("sip.mycommunications.com", "0"); break; };

                    save("location");
                    break;
            };

            # native SIP destinations are handled using our USRLOC DB
            if (!lookup("location")) {
                    sl_send_reply("404", "Not Found");
                    break;
            };
    };
    # forward to current uri now; use stateful forwarding; that
    # works reliably even if we forward from TCP to UDP
    if (!t_relay()) {
            sl_reply_error();
    };

} _______________________________________________ Serusers mailing list serusers@lists.iptel.org http://lists.iptel.org/mailman/listinfo/serusers