19 Aug
2007
19 Aug
'07
8:19 p.m.
On 8/18/07, Arya <arya6000(a)gmail.com> wrote:
Hi guys
I'm new to OpenSER so I used a article to install and configure it, I was
able to connect to it from my lan, but it never works from my public IP.
This is the tutorila I used:
http://www.oldskoolphreak.com/tfiles/voip/beginners_openser.txt I
forwarded port 5060 to the server but its no use. I also tried this on two
diffrent ISPs with the same result. Is there anything that I need to change
in the configuration to make it accept connections from a public IP?
Hi
suggest you to post your config
and
use ngrep to capture the network trace
ram