Okay for some reason the ACK from the caller ATA is not matched with the 487 from Ser. I can not see the cause for this error. Can someone provide a Ser log with high debug value, for this matching problem?
Thanks Nils Ohlmeier
On Sunday 25 May 2003 21:52, Ricardo Villa wrote:
Same thing happens on our network (0.8.10). I have attached a sample ngrep of this. (I dial #2001 from local ATA with IP:192.168.0.15 and hangup as soon as the ringing starts)
SER is at IP 200.75.73.22 and remote ATA is 200.75.91.137. After the call is cancelled SER keeps sending ACK messages to the remote ATA and 487s to the local ATA. It has always been like this. Not sure who is at fault here.
Any ideas?
Regards, Ricardo
----- Original Message ----- From: "Alejandro Olchik" aolchik@telenova.net To: "List serusers" serusers@lists.iptel.org Sent: Sunday, May 25, 2003 10:24 AM Subject: [Serusers] SER is not matching ACK Messages
I'm experiencing some strange behaviour on SER.
When an enpoint sends an INVITE and after some 180 Ringing messages cancels the call, SER forwards the CANCEL message to the destination and replies with a 200 Cancelling message. (this seems to be OK up to this point)
20ms after the Cancelling message was sent, SER sends a 487 Request cancelled message twice with 80ms of difference (any ide of why this is done?)
From this point on, even receiving a succession of ACK messages SER keeps sending the 487 Request cancelled message as if the ACK didn't match.
Any suggestion of what it can be? I'm using as the endpoint an ATA186, v2.15, and ser version 0.8.11.
Best Regards, Alejandro
Serusers mailing list serusers@lists.iptel.org http://lists.iptel.org/mailman/listinfo/serusers