13 Oct
2008
13 Oct
'08
7:43 p.m.
Hi Dan...
Well, it seems that i can solve the problem... the problem was that i
don't recompile correctly rlm_python module support. Thank you, i see a
similar answer from you in the same thread... Although my other problem
persists...
1. How can i change/define NAS-IP-Addrees parameter from openser... it takes
loopback interface, and i need that this must be gateway public ip, that i
use in my rates for cdrtool to calculate correctly MaxSessionTime.
2. I'm trying to hangup the call... I use a little server script that use
end_dlg_end MI function to fake bye's in both directions ending media
session. Problems is that openser script does not process these bye's so i
can not stop accounting. I know that this is an opensips limitation and saw
a discursion this October where opensips Bogdan developer admit that he is
working on some kind of solution.... Meanwhile i am looking for
alternativies... these are the two i have:
1. Use mediaproxy and engage_media_proxy to end media session when dialog
expires (probably playing with timeout_avp dialog function and your
script)... but i'm not sure that this can solve the accounting problem.
2. I read a bit about you are using SIP Session Timers and Yate to solve
this... can you help me a bit in the right direction or configuration
scripts...
Thank you in advance...
Cheers
DanB-2 wrote:
Raul,
this log shows only half of the call(stop one).
Can u show a full trace (start and stop of the call)?
Cheers,
DanB
On Thu, Oct 9, 2008 at 12:40 PM, raul2r2 <raul2r2(a)gmail.com> wrote:
--
View this message in context:
http://www.nabble.com/Send-MaxCallDuration-and-UserCredit-for-freeradius-cd…
Sent from the OpenSER Users Mailing List mailing list archive at Nabble.com.
Hi Dan...:
The syslog show this:
Oct 9 14:40:01 PREPSQL01 cdrtool[27237]: Normalize datasource
ser_radius,
database DB_radius, table radacct200810
Oct 9 14:40:01 PREPSQL01 cdrtool[27237]: Normalize lock id 5889 aquired
for
ser_radius:radacct200810
Oct 9 14:40:01 PREPSQL01 cdrtool[27237]: Normalize datasource
ser_radius,
database DB_radius, table radacct200809
Oct 9 14:40:01 PREPSQL01 cdrtool[27237]: Normalize lock id 5889 aquired
for
ser_radius:radacct200809
Oct 9 14:40:01 PREPSQL01 cdrtool[27237]: Database error: Table
'radius.radacct200809' doesn't exist (1146)
Oct 9 14:40:01 PREPSQL01 cdrtool[27237]: Unlock ser_radius:radacct200810
Oct 9 14:40:01 PREPSQL01 cdrtool[27237]: Unlock ser_radius:radacct200809
Oct 9 14:40:02 PREPSQL01 cdrtool[27236]: Checking user quotas for data
source OpenSER
Oct 9 14:40:02 PREPSQL01 cdrtool[27236]: Using database queries to block
accounts
Oct 9 14:40:02 PREPSQL01 cdrtool[27236]: No quota has been exceeded
Oct 9 14:40:14 PREPSQL01 cdrtool[7803]: DebitBalance
CallId=1A0082B8-7734-BA31-4828-3D24892A184C(a)192.168.0.41
From=admin(a)goldslam.com To=sip:0034678650039@192.168.0.130:5060
Gateway=127.0.0.1 Duration=8
Oct 9 14:40:14 PREPSQL01 cdrtool[7803]: Error: session
1A0082B8-7734-BA31-4828-3D24892A184C(a)192.168.0.41 for admin(a)goldslam.com
does not exist
I don't know if the bad gateway could be the cause of this... How i can
change NAS-IP-Address in openser?
Cheers...
DanB-2 wrote:
--
View this message in context:
http://www.nabble.com/Send-MaxCallDuration-and-UserCredit-for-freeradius-cd…
Sent from the OpenSER Users Mailing List mailing list archive at
Nabble.com.
_______________________________________________
Users mailing list
Users(a)lists.kamailio.org
http://lists.kamailio.org/cgi-bin/mailman/listinfo/users
_______________________________________________
Users mailing list
Users(a)lists.kamailio.org
http://lists.kamailio.org/cgi-bin/mailman/listinfo/users
Raul,
it looks like there is something wrong with the answer you receive from
cdrtool (could be wrong handled by connector too...).
Can u post me the cdrtool syslog? There it should be seen the answer
received.
Cheers,
DanB
On Tue, Oct 7, 2008 at 7:27 PM, raul2r2 <raul2r2(a)gmail.com> wrote:
>
> Hi DanB...
> Finally i have to set up manually, nothing different from README
> configuration and from my older platform running previous version of
> freeradius-cdrtool (1.1)... It's doesn't matter, setting up manually
is
> enough for me... Thank you.
> I have other stupid problem... first one is extracting gateway ip
in
> authorization section of the script. I see it
is extracted from
> NAS-IP-Address... this contain the loopbak ip 127.0.0.1... how i can
> change
> this parameter in openser to send my real gateway ip?
> The second one isn't so easy and it's possible that have some kind
of
relation
with the previous one. When the script tries to do and
endsession
over cdrtool (6.6.9) rating engine, it raises the following exception:
rlm_python [freeradius-cdrtool]: DebitBalance
CallId=27874A50-6363-3C25-6B88-6FBCB76686C6(a)192.168.0.41
From=admin(a)goldslam.com To=sip:0034XXXXXXXXX@192.168.0.130:5060
Gateway=127.0.0.1 Duration=9
rlm_python:EXCEPT:exceptions.AttributeError: 'NoneType' object has no
attribute 'find'
I'll try to investigate a bit more why this is happening...
Cheers.
_______________________________________________
Users mailing list
Users(a)lists.kamailio.org
http://lists.kamailio.org/cgi-bin/mailman/listinfo/users