7 Apr
2012
7 Apr
'12
3:54 p.m.
The prefix only specifies the destination for the build targets. As far as things like
module paths, they are not affected. You will have to change them manually in
kamailio.cfg. However, the good news is that there aren't a whole lot of paths to
change; you really only need to change it in kamailio,cfg, and in any init scripts.
--
Alex Balashov - Principal
Evariste Systems LLC
235 E Ponce de Leon Ave
Suite 106
Decatur, GA 30030
Tel: +1-678-954-0670
Fax: +1-404-961-1892
Web: http://www.evaristesys.com/, http://www.alexbalashov.com
Daniel Gonzalez <gonvaled(a)gonvaled.com> wrote:
Hello,
This is my first message to this list.
I have installed sip-router as follows (my system is Ubuntu 10.04):
cd /tmp
git clone --depth 1 git://git.sip-router.org/sip-router sip-router
cd sip-router
git checkout -b 3.1 origin/3.1
local prefix=/tmp/my/very/strange/path
mkdir -p $prefix
sudo apt-get install -y flex
sudo apt-get install -y docbook2x
make proper
make cfg prefix=$prefix
make all prefix=$prefix
make install prefix=$prefix
And this has worked as expected.
Now I try to start the daemon:
$ /tmp/my/very/strange/path/sbin/ser
loading modules under /usr/lib/ser/modules:/usr/lib/ser/modules_s
What can I do so that my non-standard path is fully recognized by all
sip router tools?
Thanks,
Daniel Gonzalez
_______________________________________________
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
sr-users(a)lists.sip-router.org
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users