Re: [SR-Users] Kamailio stop to process incoming SIP traffic via TCP.

implemented it. Now the issue has shifted to: ERROR: <core> [core/tcp_main.c:3959]: handle_new_connect(): maximum number of connections exceeded: 2048/2048 But not a single TCP connection is active between Kamailio and any device. Seems this counter for maximum number of connections now has an issue? Kristijan Am Mi., 20. März 2019 um 15:07 Uhr schrieb Daniel-Constantin Mierla &lt;miconda(a)gmail.com&gt;om>: > Hello, > > based on the trap output I think I could figure out what happened there. > > You have tcp_children to very low value (1 or so), the problem is not > actually that one, but the fact that the connection to upstream (the > device/app sending the request) was closed after receiving the request > and routing of the reply gets stuck in the way of: > > - a reply is received and has to be forwarded > - connection was lost, so Kamailio tries to establish a new one, but > takes time till fails because the upstream is behind nat or so based on > the via header: > > Via: SIP/2.0/TLS > 10.1.0.4:10002

> > - the reply is retransmitted and gets to another worker, which tries > to forward it again, but discovers a connection structure for that > destination exists (created by previous reply worker) and now waits for > the connection to be released (or better said, for the mutex on writing > buffer to be unlocked) > > - as the second reply waits, there can be other retransmissions of the > reply ending up in other workers stuck on waiting for the mutex of the > connection write buffer > > The solution here is to use set_reply_no_connect() -- you can put it > first in request_route block. I think this would be a good addition to > the default configuration file as well, IMO, the sip server should not > connect for sending replies and should do it also for requests that go > behind nat. > > Cheers, > Daniel > > On 19.03.19 10:53, Kristijan Vrban wrote: >> So i had again the situation. But this time, incoming udp was >> affected. Kamailio was sending out OPTIONS (via dispatcher module) to >> a group of asterisk machines >> but the 200 OK reply to the OPTIONS where not processed, so the >> dispatcher module set all asterisk to inactive, even though they >> replied 200 OK >> >> Attached the output of kamctl trap during the situation. Hope there is >> any useful in it. Because after "kamctl trap" it was working again >> without kamailio restart. >> >> Best >> Kristijan >> >> Am Mo., 18. März 2019 um 12:27 Uhr schrieb Daniel-Constantin Mierla >> &lt;miconda(a)gmail.com&gt;om>: >>> Hello, >>> >>> setting tcp_children=1 is not a god option for scallability,

>>> you set kamailio to process a single tcp message at one time, on high >>> traffic, that won't work well. >>> >>> Maybe try to set tcp_children to 2 or 4, that should make an eventual >>> race appear faster. >>> >>> Regarding the pid, if it is an outgoing connection, then it can be >>> created by any worker process, including a UDP worker, if that was the >>> one receiving the sip message over udp and sends it out via tcp. >>> >>> Cheers, >>> Daniel >>> >>> On 18.03.19 10:09, Kristijan Vrban wrote: >>>> Hi Daniel, >>>> >>>> for testing, i now had set: "tcp_children=1" and so far this issue

>>>> ever since. So now value to provide for "kamctl trap" yet. >>>> >>>> "kamctl ps" show this two process to handle tcp: >>>> >>>> ... >>>> }, { >>>> "IDX": 25, >>>> "PID": 71929, >>>> "DSC": "tcp receiver (generic) child=0" >>>> }, { >>>> "IDX": 26, >>>> "PID": 71933, >>>> "DSC": "tcp main process" >>>> } >>>> ... >>>> >>>> >>>> Ok, but then is was wondering to see a TCP connection on a udp

>>>> >>>> >>>> netstat -ntp |grep 5061 >>>> >>>> ... >>>> tcp 0 0 172.17.217.10:5061 195.70.114.125:18252 >>>> ESTABLISHED 71895/kamailio >>>> ... >>>> >>>> An pid 71895 is: >>>> >>>> }, { >>>> "IDX": 3, >>>> "PID": 71895, >>>> "DSC": "udp receiver child=2 sock=127.0.0.1:5060" >>>> }, { >>>> >>>> >>>> >>>> And if i look into it via "lsof -p 71895" (the udp receiver child) >>>> >>>> ... >>>> kamailio 71895 kamailio 14u sock 0,9 0t0 >>>> 8856085 protocol: TCP >>>> kamailio 71895 kamailio 15u sock 0,9 0t0 >>>> 8886886 protocol: TCP >>>> kamailio 71895 kamailio 16u sock 0,9 0t0 >>>> 8854886 protocol: TCP >>>> kamailio 71895 kamailio 17u sock 0,9 0t0 >>>> 8828915 protocol: TCP >>>> kamailio 71895 kamailio 18u unix 0x000000005f73cb91 0t0 >>>> 1680314 type=DGRAM >>>> kamailio 71895 kamailio 19u IPv4 1846523 0t0 >>>> TCP kamailio-preview:sip-tls->XXX:18252 (ESTABLISHED) >>>> kamailio 71895 kamailio 20u sock 0,9 0t0 >>>> 8887192 protocol: TCP >>>> kamailio 71895 kamailio 21u sock 0,9 0t0 >>>> 8813634 protocol: TCP >>>> kamailio 71895 kamailio 22u unix 0x00000000c19bd102 0t0 >>>> 1681407 type=STREAM >>>> kamailio 71895 kamailio 23u sock 0,9 0t0 >>>> 8850488 protocol: TCP >>>> ... >>>> >>>> Not only the ESTABLISHED TCP session. But also this empty sockets >>>> "protocol: TCP" >>>> What are they doing there in the udp receiver? Is that how it's

>>>> >>>> Kristijan >>>> >>>> Am Do., 14. März 2019 um 14:48 Uhr schrieb Daniel-Constantin Mierla >>>> &lt;miconda(a)gmail.com&gt;om>: >>>>> Can you get file written by `kamctl trap`? It should have the

>>>>> for all kamailio processes. You need latest kamailio 5.2. >>>>> >>>>> Also, get the output for: kamctl ps >>>>> >>>>> Cheers, >>>>> Daniel >>>>> >>>>> On 14.03.19 13:52, Kristijan Vrban wrote: >>>>>> When i attach via gdb to one of the tcp worker, i see this: >>>>>> >>>>>> (gdb) bt >>>>>> #0 0x00007fdaf4d14470 in futex_wait (private=<optimized out>, >>>>>> expected=1, futex_word=0x7fdaeca92f8c) at >>>>>> ../sysdeps/unix/sysv/linux/futex-internal.h:61 >>>>>> #1 futex_wait_simple (private=<optimized out>, expected=1, >>>>>> futex_word=0x7fdaeca92f8c) at ../sysdeps/nptl/futex-internal.h:135 >>>>>> #2 __pthread_rwlock_wrlock_slow (rwlock=0x7fdaeca92f80) at >>>>>> pthread_rwlock_wrlock.c:67 >>>>>> #3 0x00007fdaf0912ee9 in CRYPTO_THREAD_write_lock () from >>>>>> /usr/lib/x86_64-linux-gnu/libcrypto.so.1.1 >>>>>> #4 0x00007fdaf08e1c08 in ?? () from

>>>>>> #5 0x00007fdaf08a6f69 in ?? () from

>>>>>> #6 0x00007fdaf08b36c7 in EVP_CIPHER_CTX_ctrl () from >>>>>> /usr/lib/x86_64-linux-gnu/libcrypto.so.1.1 >>>>>> #7 0x00007fdaf0c31144 in ?? () from

>>>>>> #8 0x00007fdaf0c2bddb in ?? () from

>>>>>> #9 0x00007fdaf0c22858 in ?? () from

>>>>>> #10 0x00007fdaf0c1af61 in SSL_do_handshake () from >>>>>> /usr/lib/x86_64-linux-gnu/libssl.so.1.1 >>>>>> #11 0x00007fdaf0e8d31b in tls_accept (c=0x7fdaed26fa98, >>>>>> error=0x7ffffe2a2df0) at tls_server.c:422 >>>>>> #12 0x00007fdaf0e96a1b in tls_read_f (c=0x7fdaed26fa98, >>>>>> flags=0x7ffffe2c318c) at tls_server.c:1116 >>>>>> #13 0x0000556ead5e7c46 in tcp_read_headers (c=0x7fdaed26fa98, >>>>>> read_flags=0x7ffffe2c318c) at core/tcp_read.c:469 >>>>>> #14 0x0000556ead5ef9cb in tcp_read_req (con=0x7fdaed26fa98, >>>>>> bytes_read=0x7ffffe2c3184, read_flags=0x7ffffe2c318c) at >>>>>> core/tcp_read.c:1496 >>>>>> #15 0x0000556ead5f575f in handle_io (fm=0x7fdaf597aa98, events=1, >>>>>> idx=-1) at core/tcp_read.c:1862 >>>>>> #16 0x0000556ead5e2053 in io_wait_loop_epoll (h=0x556eadaaeec0

>>>>>> t=2, repeat=0) at core/io_wait.h:1065 >>>>>> #17 0x0000556ead5f6b35 in tcp_receive_loop (unix_sock=49) at >>>>>> core/tcp_read.c:1974 >>>>>> #18 0x0000556ead4c8e24 in tcp_init_children () at

>>>>>> #19 0x0000556ead3c352a in main_loop () at main.c:1735 >>>>>> #20 0x0000556ead3ca5f8 in main (argc=13, argv=0x7ffffe2c3828) at

>>>>>> >>>>>> >>>>>> >>>>>> >>>>>> >>>>>> >>>>>> >>>>>> Am Do., 14. März 2019 um 13:41 Uhr schrieb Kristijan Vrban >>>>>> &lt;vrban.lkml(a)gmail.com&gt;om>: >>>>>>> Hi, with full debug is see this in log for every incoming TCP SIP

>>>>>>> >>>>>>> Mar 14 12:10:15 kamailio-preview /usr/sbin/kamailio[17940]: DEBUG: >>>>>>> <core> [core/tcp_main.c:3871]: send2child(): WARNING: no free tcp >>>>>>> receiver, connection passed to the least busy one (105) >>>>>>> Mar 14 12:10:15 kamailio-preview /usr/sbin/kamailio[17940]: DEBUG: >>>>>>> <core> [core/tcp_main.c:3875]: send2child(): selected tcp worker 2 >>>>>>> 27(17937) for activity on [tls:172.17.217.10:5061],

>>>>>>> >>>>>>> So the Kamailio TCP process is working, and received TCP traffic.

>>>>>>> the tcp workers are somehow busy. >>>>>>> >>>>>>> When i attach via strace to the TCP worker, i do not see any

>>>>>>> >>>>>>> futex(0x7fdaeca92f8c, FUTEX_WAIT_PRIVATE, 1, NULL >>>>>>> >>>>>>> and nothing, even when i see the main tcp process choose this

>>>>>>> >>>>>>> Kristijan >>>>>>> >>>>>>> Am Mi., 27. Feb. 2019 um 15:14 Uhr schrieb Kristijan Vrban >>>>>>> &lt;vrban.lkml(a)gmail.com&gt;om>: >>>>>>>> first of all thanks for the feedback. i prepared our system now

>>>>>>>> with debug=3 >>>>>>>> I hope to see more then then. >>>>>>>> >>>>>>>> Am Mi., 27. Feb. 2019 um 11:53 Uhr schrieb Kristijan Vrban >>>>>>>> &lt;vrban.lkml(a)gmail.com&gt;om>: >>>>>>>>> Hi kamailios, >>>>>>>>> >>>>>>>>> i have a creepy situation with v5.2.1 stable Kamilio. After a

>>>>>>>>> so, Kamailio stop to process incoming SIP traffic via TCP. The >>>>>>>>> incoming TCP network packages get TCP-ACK from the OS (Debian 9, >>>>>>>>> 4.18.0-15-generic-Linux) but Kamailio does not show any

>>>>>>>>> the SIP-Traffic incoming via TCP. No logs, nothing. While

>>>>>>>>> UDP is working just totally fine. >>>>>>>>> >>>>>>>>> When i look via command "netstat -ntp" is see, that the Recv-Q

>>>>>>>>> bigger and bigger. e.g.: >>>>>>>>> >>>>>>>>> Proto Recv-Q Send-Q Local Address Foreign Address State

>>>>>>>>> name tcp 4566 0 172.17.217.12:5060 xxx.xxx.xxx.xxx:57252

>>>>>>>>> 31347/kamailio >>>>>>>>> >>>>>>>>> After Kamailio restart, all is working fine again for a day. We

>>>>>>>>> maybe 10-20 devices online via TCP and low call volume (1-2

>>>>>>>>> minute). The only settings for tcp we have is

>>>>>>>>> >>>>>>>>> How to could we debug this situation? Again, no error, no

>>>>>>>>> the log. Just nothing. >>>>>>>>> >>>>>>>>> Kristijan >>>>>> _______________________________________________ >>>>>> Kamailio (SER) - Users Mailing List >>>>>> sr-users(a)lists.kamailio.org >>>>>> https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users >>>>> -- >>>>> Daniel-Constantin Mierla -- www.asipto.com >>>>> www.twitter.com/miconda -- www.linkedin.com/in/miconda >>>>> Kamailio World Conference - May 6-8, 2019 -- www.kamailioworld.com >>>>> Kamailio Advanced Training - Mar 25-27, 2019, in Washington, DC,

>>>>> >>>> _______________________________________________ >>>> Kamailio (SER) - Users Mailing List >>>> sr-users(a)lists.kamailio.org >>>> https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users >>> -- >>> Daniel-Constantin Mierla -- www.asipto.com >>> www.twitter.com/miconda -- www.linkedin.com/in/miconda >>> Kamailio World Conference - May 6-8, 2019 -- www.kamailioworld.com >>> Kamailio Advanced Training - Mar 25-27, 2019, in Washington, DC, USA

>>> > -- > Daniel-Constantin Mierla -- www.asipto.com > www.twitter.com/miconda -- www.linkedin.com/in/miconda > Kamailio World Conference - May 6-8, 2019 -- www.kamailioworld.com > Kamailio Advanced Training - Mar 25-27, 2019, in Washington, DC, USA --

>