Re: [SR-Users] Which mode to capture "written to network" traffic with homer and topos

Hello Daniel, thanks for the fast reply. i changed the loadmodule order (siptrace.so before topos.so) and its the same behavior. With sip_trace_mode("t"); For better understanding I attached the loading-part of my kamailio.cfg with siptrace and topos. The howl request route is not included, but didnt matter imho. Cheers Karsten #!KAMAILIO ## ## kamailio 5.3.x ## ####### Include Local Config If Exists ######### import_file "kamailio-local.cfg" # kamailio-define for local changes If Exists import_file "kamailio-define.cfg" ####### Defined Values ######### #!define WITH_NAT 1 #!define WITH_NATSIPPING 1 #!define WITH_BLOCK3XX 1 #!define WITH_TRUNK 1 # NOT WITH_MULTIDOMAIN # NOT WITH_REGISTER 1 # NOT WITH_DEBUG 1 #!define WITH_TOPOS ####### Defined Values ######### #!ifdef WITH_MULTIDOMAIN #!define MULTIDOMAIN 1 #!else #!define MULTIDOMAIN 0 #!endif # use WITH_500_ERROR as define for serial-forking on 500-RC #!define FLT_ACC 1 #!define FLT_ACCMISSED 2 #!define FLT_ACCFAILED 3 #!define FLT_NATS 5 #!define FLB_NATB 6 #!define FLB_NATSIPPING 7 #!define FLG_DIALOG 8 #!define WITH_SDP_REWRITE 1 # ####### Global Parameters ######### ### LOG Levels: 3=DBG, 2=INFO, 1=NOTICE, 0=WARN, -1=ERR #!ifdef WITH_DEBUG debug=4 log_stderror=yes #!else debug=2 log_stderror=no #!endif memdbg=5 memlog=5 log_name="kamailio" log_facility=LOG_LOCAL4 log_prefix="{$hdr(CSeq) $ci} " # number of SIP routing processes fork=yes children=8 auto_aliases=no tos=0x60 ############## #!ifdef WITH_DNSMASQ_ONLY dns_servers_no=1 #!endif use_dns_cache=on # use internal DNS cache use_dns_failover=on # depends on internal DNS cache dns_srv_loadbalancing=on dns_try_naptr=on dns_retr_time=1 # seconds before retrying a DNS request dns_retr_no=3 # number of DNS retransmissions dns_naptr_ignore_rfc=yes # ignore target NAPTR priority dns_tcp_pref=30 # TCP has second-highest priority dns_udp_pref=10 # use UDP with least priority ############# /* uncomment the next line to disable TCP (default on) */ #disable_tcp=yes #!ifdef WITH_TLS enable_tls=yes #!endif # life time of TCP connection when there is no traffic # - a bit higher than registration expires to cope with UA behind NAT tcp_connection_lifetime=3605 # sendsocket for homer #!ifdef WITH_HOMER #!substdef "!MY_HOMER_CAPTURE!sip:MY_HOMER_IP_ADDR:MY_HOMER_PORT!g" #!substdef "!MY_LOCAL_SENDSOCK!sip:MY_PRV_IP:MY_LOCAL_SEND_PORT!g" #!substdef "!MY_LOCAL_SENDLISTEN!udp:MY_PRV_IP:MY_LOCAL_SEND_PORT!g" socket_workers=2 listen=MY_LOCAL_SENDLISTEN #!endif # allows reuse of TCP ports. OS must support SO_REUSPORT tcp_reuse_port=yes # control if printing routing tree and udp probing buffer debug # should be printed verbose_startup=yes # noisy feedback, default 1, disabled 0 sip_warning=0 /* upper limit for TCP connections (it includes the TLS connections) */ tcp_max_connections=50000 ####### Modules Section ######## # set paths to location of modules (to sources or installation folders) #!ifdef WITH_SRCPATH mpath="modules/" #!else mpath="/usr/lib64/kamailio/modules/" #!endif #!ifdef WITH_MYSQL loadmodule "db_mysql.so" loadmodule "sqlops.so" #!endif loadmodule "jsonrpcs.so" #!ifndef WITH_MYSQL loadmodule "db_text.so" #!endif loadmodule "kex.so" loadmodule "corex.so" loadmodule "tm.so" loadmodule "tmx.so" loadmodule "sl.so" loadmodule "rr.so" loadmodule "pv.so" loadmodule "maxfwd.so" loadmodule "usrloc.so" loadmodule "textops.so" loadmodule "textopsx.so" loadmodule "siputils.so" loadmodule "xlog.so" loadmodule "sanity.so" loadmodule "ctl.so" loadmodule "cfg_rpc.so" loadmodule "acc.so" loadmodule "path.so" loadmodule "counters.so" loadmodule "ndb_redis.so" #!ifdef WITH_HOMER loadmodule "siptrace.so" #!endif #!ifdef WITH_TOPOS loadmodule "topos_redis.so" loadmodule "topos.so" #!endif loadmodule "uac.so" loadmodule "avpops.so" loadmodule "sdpops.so" loadmodule "msrp.so" #!ifdef WITH_AUTH loadmodule "auth.so" loadmodule "auth_db.so" #!endif loadmodule "permissions.so" loadmodule "rtpengine.so" loadmodule "nathelper.so" loadmodule "nat_traversal.so" loadmodule "htable.so" loadmodule "pike.so" #loadmodule "dialog.so" loadmodule "dispatcher.so" #!ifdef WITH_MULTIDOMAIN loadmodule "domain.so" #!endif #!ifdef WITH_TLS loadmodule "tls.so" #!endif #!ifdef WITH_DEBUG loadmodule "debugger.so" #!endif #SDP_HIDE # ----------------- setting module-specific parameters --------------- modparam("path", "use_received", 1) # ----- jsonrpcs params ----- modparam("jsonrpcs", "pretty_format", 1) /* set the path to RPC fifo control file */ modparam("jsonrpcs", "fifo_name", "/var/run/kamailio/kamailio_rpc.fifo") /* set the path to RPC unix socket control file */ #modparam("jsonrpcs", "dgram_socket", "/var/run/kamailio/kamailio_rpc.sock") # ----- ctl params ----- #modparam("ctl", "binrpc", "unix:/var/run/kamailio/kamailio_ctl") # ----- tm params ----- # auto-discard branches from previous serial forking leg modparam("tm", "failure_reply_mode", 3) # default retransmission timeout: 30sec modparam("tm", "fr_timer", 30000) # default invite retransmission timeout after 1xx: 120sec modparam("tm", "fr_inv_timer", 120000) # Default value is "trying -- your call is important to us". modparam("tm", "auto_inv_100_reason", "Trying") # ----- rr params ----- # set next param to 1 to add value to ;lr param (helps with some UAs) modparam("rr", "enable_full_lr", 1) # do not append from tag to the RR (no need for this script) modparam("rr", "append_fromtag", 1) # ----- acc params ----- /* what special events should be accounted ? */ modparam("acc", "early_media", 1) modparam("acc", "report_ack", 0) modparam("acc", "report_cancels", 1) modparam("acc", "detect_direction", 1) modparam("acc", "log_flag", FLT_ACC) modparam("acc", "log_facility", "LOG_LOCAL2") modparam("acc", "log_missed_flag", FLT_ACCMISSED) modparam("acc", "log_extra", "src_user=$fU;src_domain=$fd;src_ip=$si;" "dst_ouser=$tU;dst_user=$rU;dst_domain=$rd") modparam("acc", "failed_transaction_flag", FLT_ACCFAILED) modparam("permissions", "db_url", "DBURL") modparam("permissions", "db_mode", 1) # ----- domain params ----- #!ifdef WITH_MULTIDOMAIN modparam("domain", "db_url", "DBURL") # register callback to match myself condition with domains list modparam("domain", "register_myself", 1) #!endif #!ifdef WITH_NAT # ----- rtpproxy params ----- modparam("rtpengine", "rtpengine_sock","0 == udp:127.0.0.1:2223") modparam("rtpengine", "rtpengine_tout_ms", 2000) modparam("rtpengine", "rtpengine_disable_tout", 20) #!ifdef WITH_SDP_REWRITE modparam("rtpengine", "read_sdp_pv", "$avp(sdp)") #!endif #modparam("rtpengine", "setid_avp", "$avp(setid)") modparam("nat_traversal", "keepalive_from", "sip:keepalive@XXXXX") modparam("nat_traversal", "keepalive_extra_headers", "User-Agent: SBC-OS 1.0\r\nX-KeepAlive: true\r\n") modparam("nat_traversal", "keepalive_method", "OPTIONS") modparam("nat_traversal", "keepalive_interval", 30) modparam("nat_traversal", "keepalive_state_file", "/var/run/kamailio/keepalive_state") #!endif #!ifdef WITH_TLS # ----- tls params ----- modparam("tls", "config", "/etc/kamailio/tls.cfg") #!endif modparam("pike", "sampling_time_unit", 10) modparam("pike", "reqs_density_per_unit", 160) modparam("pike", "remove_latency", 30) # ----- htable params ----- # ip ban htable with autoexpire after 5 minutes modparam("htable", "htable", "ipban=>size=8;autoexpire=300;") #!ifdef WITH_XMLRPC # ----- xmlrpc params ----- modparam("xmlrpc", "route", "XMLRPC"); modparam("xmlrpc", "url_match", "^/RPC") #!endif #!ifdef WITH_DEBUG # ----- debugger params ----- modparam("debugger", "cfgtrace", 1) modparam("debugger", "log_level_name", "exec") #!endif # ----- dialog --------- #modparam("dialog", "dlg_flag", FLG_DIALOG) #modparam("dialog", "enable_stats", 1) #modparam("dialog", "dlg_match_mode", 2) #modparam("dialog", "profiles_with_value", "POCS2TE;TE2POCS;totals") #modparam("dialog", "track_cseq_updates", 0) ## TRACK CSEQ #Dispatcher #!ifdef WITH_MYSQL modparam("dispatcher", "db_url", "DBURL") modparam("dispatcher", "table_name", "dispatcher") #!endif #!ifndef WITH_MYSQL modparam("dispatcher", "list_file", "/etc/kamailio/dispatcher.list") #!endif modparam("dispatcher", "ds_ping_method", "OPTIONS") modparam("dispatcher", "ds_ping_from", "<sip:ping@XXXXX>") modparam("dispatcher", "ds_ping_interval", 30) modparam("dispatcher", "ds_probing_mode", 1) modparam("dispatcher", "ds_probing_threshold", 2) modparam("dispatcher", "setid_pvname", "$var(setid)") modparam("dispatcher", "attrs_pvname", "$var(attrs)") modparam("dispatcher", "ds_ping_reply_codes", "class=2") modparam("dispatcher", "ds_ping_latency_stats", 1) #!ifdef WITH_500_ERROR modparam("dispatcher", "flags", 2) #!endif #TOPOS #modparam("ndb_redis", "server", "name=srv8;addr=172.20.160.155;port=6379;db=8") modparam("ndb_redis", "server", "name=CFG_REDIS_NAME;addr=CFG_REDIS_ADDR;port=6379;db=CFG_REDIS_DB") modparam("ndb_redis", "connect_timeout", 1500) # default 1000ms/1sec modparam("ndb_redis", "cmd_timeout", 1500) # default 1000ms/1sec #### $mb message debugging (see event-routes) #!ifdef WITH_MB_DEBUG modparam("corex", "network_io_intercept", 1) modparam("corex", "min_msg_len", 32) #!endif #!ifdef WITH_TOPOS modparam("topos", "storage", "redis") modparam("topos_redis", "serverid", "CFG_REDIS_NAME") modparam("topos", "branch_expire", 14400) modparam("topos", "dialog_expire", 14400) modparam("topos", "clean_interval", 60) #!endif #dont' restore ##modparam("uac","restore_mode","none") # SBC-OS ### modparam("uac","restore_dlg", 1) # needs dialog.so #modparam("uac","restore_mode","manual") #modparam("uac","restore_from_avp","$avp(s:original_uri_from)") # needed if you dont activate dialog.so and set restore_mode auto! #modparam("uac","restore_to_avp","$avp(s:original_uri_to)") ## UAC REGISTER #!ifdef WITH_UAC_REGISTER modparam("uac", "reg_contact_addr", "CFG_PROD_IP") modparam("uac", "reg_timer_interval", 10) modparam("uac", "reg_retry_interval", 10) modparam("uac", "reg_db_url", "DBURL") modparam("uac", "restore_mode", "auto") # auto is default modparam("uac", "auth_username_avp", "$avp(AVP_AUTH_USERNAME)") modparam("uac", "auth_password_avp", "$avp(AVP_AUTH_PASSWORD)") modparam("uac", "auth_realm_avp", "$avp(AVP_AUTH_REALM)") modparam("uac", "reg_keep_callid", 1) # set to 1 - RFC3261 conform modparam("uac", "default_socket", "CFG_PROD_IP:5060") # tcp_reuse_port=yes MUSS gesetzt werden. #!endif #!ifdef WITH_HOMER #Siptrace modparam("siptrace", "force_send_sock", "MY_LOCAL_SENDSOCK") # local interface from where to send the duplicated traffic modparam("siptrace", "duplicate_uri", "MY_HOMER_CAPTURE") modparam("siptrace", "hep_mode_on", 1) # enable/disable Homer encapsulate mode modparam("siptrace", "hep_version", 3) # HEPv3 the timestamp and capture agent ID will be included in the HEP header modparam("siptrace", "trace_to_database", 0) # trace to database modparam("siptrace", "trace_on", 1) # enable/disable trace modparam("siptrace", "trace_mode", 0) # default 0, if 1 then you dont need call siptrace flag or sip_trace() modparam("siptrace", "hep_capture_id", 8) # capture agent id Limitation: 32-bit for HEPv3. #!endif #!ifdef WITH_MYSQL modparam("sqlops","sqlcon","db=>DBURL") #!endif ####### Routing Logic ######## include_file "kamailio-hmr.cfg" remove.prack = 1 desc "1 true - 0 false" mylog.logint = 0 desc "on the fly logging" # Main SIP request routing logic # - processing of any incoming SIP request starts with this route # - note: this is the same as route { ... } request_route { #!ifdef WITH_HOMER # Set the tracing mode: message, transaction or dialog. Need 5.3.x sip_trace_mode("t"); #!endif ... } # vim: set tabstop=4 softtabstop=4 shiftwidth=4 noexpandtab: Am Do., 11. Juni 2020 um 10:25 Uhr schrieb Daniel-Constantin Mierla < miconda(a)gmail.com&gt;gt;: -- Mit freundlichen Grüßen *Karsten Horsmann*