Hello Again,
Thanks for the great and timely help Daniel. Finally adjusted the BLF lights. Only couple of things, which I'm sure are some functions missing the call flow, are:

1- When users register or un-register the BLF don't update anything though NOTIFY are triggered.
2- When call comes from PSTN and an available user answers the call, BLF stays on green/available. 

I'll continue working on fixing these in the config, any hints are still welcome.

Many thanks once again.
Best Regards,
Sammy

On Tue, Feb 10, 2015 at 4:33 AM, Daniel-Constantin Mierla <miconda@gmail.com> wrote:
Hello,

ok, good that is working better now.

I will also look more into these module in the near future. I think the Expires value must be different based on state, e.g., trying and ringing should be shorter than active call.

Cheers,
Daniel


On 10/02/15 10:27, SamyGo wrote:
Hi Daniel,
This has helped us substantially, I've added few more lines in the config and seems we've working BLF now. I'll share the results when we complete the tests.

Thanks alot for the timely help. 
BR,
Sammy

On Mon, Feb 9, 2015 at 11:24 AM, Daniel-Constantin Mierla <miconda@gmail.com> wrote:
Hello,

went and configured a server for BLF as the logs were not showing any obvious issue.

The result was that the way module parameters were set or have default values was creating this situation.

The story is that the pua_dialoginfo takes the dialog lifetime to set the expires for PUBLISH. Dialog module sets that by default to 12 hours. That means the entries in presentity table were kept for 12 hours.

Then force_single_dialog for presence_dialoginfo is 0, which means aggregate all the xml documents from presentity table. That could end up in a long message.

The solution is to overwrite the dialog lifetime via pua_dialoginfo:
  - http://kamailio.org/docs/modules/4.2.x/modules/pua_dialoginfo.html#idp2576952

Set override_lifetime to a lower value, like 90 .. 120 seconds, see the readme for hints on its value.

Also, force_single_dialog set to 1 could be considered, but lowering the lifetime should make it work.

Let me know if works ok with these settings.

Cheers,
Daniel


On 07/02/15 10:48, SamyGo wrote:
Please ignore the previous attachment got corrupted, these are the complete debug logs.

Many Thanks,


On Fri, Feb 6, 2015 at 4:38 AM, Daniel-Constantin Mierla <miconda@gmail.com> wrote:
Btw, there is no 'debug' message -- have you set debug=3?

Daniel


On 06/02/15 10:26, Daniel-Constantin Mierla wrote:
Hello,

the log doesn't show the messages from the INVITE to the BYE. Are you sure you got them for the entire call? There are notes from syslog that there are rate limits, dropping logs.

Also, I noticed errors printed by t_check_trans(), are you using it from a branch_route? Eventually you can send the config to me to figure out from where the issues for error log messages are coming.

Cheers,
Daniel


On 05/02/15 23:54, SamyGo wrote:
Hi Daniel,
Thanks alot for your time, please see the log file attached.

If needed, I can provide sip captures received at the phone .

Thanks,

On Thu, Feb 5, 2015 at 4:42 PM, Daniel-Constantin Mierla <miconda@gmail.com> wrote:

Hello,

can you reproduce this with three phones (not to get too much traffic)? Use debug=3 in kamailio.cfg and send to me all the logs from kamailio start. I will look to see what happens.

Cheers,
Daniel


On 05/02/15 22:21, SamyGo wrote:
Hi community,

I'm dealing with a problem here related to presence module handling BLF. My BLF phones are Yealink T28p with latest firmware and work perfectly with Asterisk and FreeSwitch but not with Kamailio as expected. 

What I'm observing here is a malfunctioning statuses due to accumulation of multiple entries of just one status in "presentitiy" table. These entries neither get expired not cleared from DB hence I see atleast 21 XML tags combined in the NOTIFY sent to Phones.

Here is what I've figured out a manual way to make the BLF work fine again.

Step -1 Make call between two endpoints. see entries in presentitiy table showing up. 
Step -2 NOTIFYs sent to phones subscribing those users from Kamailio and phones show correct flashing red BLF lights 

Step -3 clear the entries from presentity table manually i.e mysql> truncate presentity;

Step -4 Hangup the phones, presentity table shows few more entries with state='terminated' NOTIFY sent again to subscribers.. BLF lighst turn green happily.

Here are my module params:


modparam("presence", "db_url", DBURL)
modparam("presence", "notifier_processes", 1)
modparam("presence", "server_address", "sip:1.2.5.5" )
modparam("presence", "send_fast_notify", 0)
modparam("presence", "db_update_period", 1)
modparam("presence", "clean_period", 4)
modparam("presence", "subs_db_mode", 2)
modparam("presence", "max_expires", 36)
modparam("presence", "expires_offset", 10)
modparam("presence", "subs_htable_size", 12)
modparam("presence", "pres_htable_size", 12)
modparam("presence", "fetch_rows", 1000)
(these params were set as default earlier but I changed them as above hoping they'll help)

Kindly share your expert opinion.

Best Regards,
Sammy


-- 
Daniel-Constantin Mierla
http://twitter.com/#!/miconda - http://www.linkedin.com/in/miconda
Kamailio World Conference, May 27-29, 2015
Berlin, Germany - http://www.kamailioworld.com


-- 
Daniel-Constantin Mierla
http://twitter.com/#!/miconda - http://www.linkedin.com/in/miconda
Kamailio World Conference, May 27-29, 2015
Berlin, Germany - http://www.kamailioworld.com