16 Dec
2005
16 Dec
'05
10:02 a.m.
The problem is that the BYE request will be handled by your LCR logic.
The BYE request should be route in the loose_route block as it is an
in-dialog request. Maybe the BYE sent from the gateway is not correct.
Please post a ngrep dump (ngrep -t -W byline port 5060)
regards
klaus
Pepe wrote:
Hello,
Im configuring Openser with LCR module and Im having an extrange
behavior, I have 2 gateways, GW1(preference1) and GW2(preference2),
GW1(pref.1)
/ \
ClientA --> OpenSer --> Client B
\ GW2 (pref.2) /
When I call from Client A to Client B using GW1, all works fine, its the
same when hang up Client B or Client A, but when GW1 fail(I provoke it
changing codec) and use failure route (GW 2) then if Client A hang up
all works fine, but the problem is when is Client B who hang up, its
like a new conversation, GW 2 send BYE to openser and Openser just send
"503 Service Not avilable - No gateways" to GW2, but doesnt send nothing
to ClientA, any idea ????
Thx in advance
this is my basic configuration( I have attached full config file):
/route{/
/ if (!method=="REGISTER") {
record_route();
};/
/ if (loose_route()) {
append_hf("P-hint: rr-enforced\r\n");
route(1);
};/
/ if (!uri==myself) {
append_hf("P-hint: outbound\r\n");
route(1);
};/
/ if (uri==myself) {
if (method=="REGISTER") {
save("location");
exit;
};/
/ if (method=="INVITE") {
if (!lookup("location")) {
if (!load_gws()) {
sl_send_reply("500", "Server Internal
Error - Cannot load gateways");
return;
};
};
if (!next_gw()) {
sl_send_reply("503", "Service not available - No
gateways");
return;
};
};
};
};/
/ t_on_failure("1");
route(1);
}/
/route[1] {/
/ if (!t_relay()) {
sl_send_reply("666","t_relay fallido");
return;
};/
/ exit;
}/
/failure_route[1] {/
/ if (!next_gw()) {
t_reply("503", "Service not available - No gateways 1");
return;
};/
/ if (!t_relay()) {
t_reply("666","t_relay fallido");
return;
};
}/
------------------------------------------------------------------------
_______________________________________________
Users mailing list
Users(a)openser.org
http://openser.org/cgi-bin/mailman/listinfo/users