Re: [Serusers] receive_msg: no mem for sip_msg

Try to install 0.8.14. Jan. On 10-11 14:27, Bogdan-Andrei IANCU wrote: >Hi Gwen, > >try to set back db_mode to 1 or 2 but without adding the aliases via >serctl. I'm trying to figure out if it's a problem in DB part or in > fifo >part of usrloc. > >bogdan > >g.billoudet(a)arwen-tech.fr wrote: > > >>Hi, thanks for help >> >>I used serctl alias add 1234 sip:gwenael@arwen-tech.fr just after >> >> >starting > > >>ser : >>- When I set modparam("usrloc", "db_mode", 0), ser works fine and I >> can >>have phone calls but I can't use this alias of course... >>- When I ser modparam("usrloc", "db_mode", 1), ser just doesn't work >> at >>all. >> >>My aliases table is empty when I start ser. I am using ser 0.8.12. >> >> Gwen >> >> >> >> >> >>>On 10-11 11:41, Bogdan-Andrei IANCU wrote: >>> >>> >>> >>>>Jan Janak wrote: >>>> >>>> >>>> >>>>>On 10-11 10:01, Bogdan-Andrei IANCU wrote: >>>>> >>>>> >>>>> >>>>> >>>>>>my first guess is that use at start-up time you have an intensive >>>>>>private memory consumer which gets into conflict with the SIP >>>>>> >>>>>> >messages > > >>>>>>receiver. >>>>>> >>>>>>Judging after the error (in receive loop) I'm sure you have some >>>>>> >>>>>> >SIP > > >>>>>>traffic at start-up - please check with tcpdump or ngrep - it >>>>>> can >>>>>> >>>>>> >be > > >>>>a >>>> >>>> >>>> >>>>>>REGISTER, SUBSCRIBE, etc >>>>>> >>>>>>Looking into your script, I would say only usrloc can be the >>>>>> >>>>>> >intensive > > >>>>>>private memory consumer - if you have a lot of entries in DB >>>>>> >>>>>> >(usrloc > > >>>>and >>>> >>>> >>>> >>>>>>aliases). To check this theory, try to start ser with DB disabled >>>>>> >>>>>> >in > > >>>>>>usrloc; set: >>>>>> modparam("usrloc", "db_mode", 0) >>>>>> >>>>>>please see if you still get the error and also please confirm if >>>>>> >>>>>> >you > > >>>>>>have or not sip traffic. >>>>>> >>>>>> >>>>>I don't think this is the problem. usrloc consumes private memory >>>>>before SER forks (and at that stage it does not process SIP >>>>> >>>>> >>>>messages), >>>> >>>> >>>> >>>>>when re-loading data from the database. It would fail to start if >>>>> >>>>> >>>>this >>>> >>>> >>>> >>>>>was the problem, so I think there must be some other memory >>>>> problem. >>>>> >>>>> >>>>I was considering the possibility of memory fragmentation. If there >>>> >>>> >are > > >>>>a lot of usrloc/aliases records to be loaded, memory can get to >>>>fragmented to be able later to alloced a bigger size chunk. >>>> >>>> >>>Bot tables (aliases, location) are empty: >>> >>> 0(0) preload_udomain(): Table is empty >>> 0(0) fixing /usr/local/lib/ser/modules/sl.so sl_send_reply >>> 0(0) fixing /usr/local/lib/ser/modules/registrar.so lookup >>> 0(0) preload_udomain(): Table is empty >>> >>> Jan. >>> >>> >>> >> >>