Hello,
On 03/05/2010 12:33 AM, Geoffrey Mina wrote:
No, I am not seeing any options messages. It
doesn't appear to be
doing anything while in probing mode. How often should an OPTIONS
message go out?
One thing to note, i have two public IP addresses on eht0, so I have
eht0 and eth0:1. I also have eth1 which is a private network
interface. I have nothing specified in the kamailio.cfg "listen", so
Kamailio just listens on all IP addresses. I do not believe this
happened before I added the 2nd IP to eth0. At that time, i also had
explicit listen parameters specifying the internal and external IP
addreses. When the configuration was in it's previous state, this
never happened.
One additional bit of info, the servers that are in "P" state are on a
different public subnet. The servers in "A" state are all in the same
public subnet as the Kamailio.
do you have mhomed turned on?
http://www.kamailio.org/dokuwiki/doku.php/core-cookbook:3.0.x#mhomed
You need it if there is no routing bridging between the two IP interfaces.
Cheers,
Daniel
On Thu, Mar 4, 2010 at 11:28 AM, Daniel-Constantin
Mierla
<miconda(a)gmail.com> wrote:
> Hello,
>
> On 03/04/2010 07:33 AM, Geoffrey Mina wrote:
>
>> As a side note, i have enabled sip tracing on the machines which are
>> being flagged as "P", and no SIP packets are ever arriving. I am
>> positive there is no firewall or other device in the middle which
>> would be stopping the flow of traffic.
>>
>> On Wed, Mar 3, 2010 at 10:58 PM, Geoffrey Mina<geoffreymina(a)gmail.com>
>> wrote:
>>
>>
>>> Hello,
>>> I have a weird issue with Dispatcher module. When I do a ds_list I
>>> get some of my destinations returned with flag=P. It appears that
>>> when they are in this state, they are not included in the list of
>>> destinations to send traffic to.
>>>
>>> I have tried restarting Kamailio, and these certain servers always
>>> return to flag=P.
>>>
>>> I have confirmed the servers are up and running fine. They are
>>> communicating without issue at the SIP and network level.
>>>
>>> Any idea what could cause this?
>>>
> P is probing mode and destination should go in this state if one call
> couldn't be routed via it.
>
> Do you see OPTIONS messages sent to those gateways while in P mode?
>
> Cheers,
> Daniel
>
> --
> Daniel-Constantin Mierla
> Kamailio SIP Router Masterclass, Berlin, March 22-26, 2010
> *
http://www.asipto.com/index.php/sip-router-masterclass/
>
>
>
--
Daniel-Constantin Mierla
Kamailio SIP Router Masterclass, Berlin, March 22-26, 2010
*
http://www.asipto.com/index.php/sip-router-masterclass/