18 Sep
2003
18 Sep
'03
11:32 a.m.
Steve Dolloff wrote:
I found an example config for nathelper in the
modules/nethelper
directory in the source tar. It seems to be working great, with one
small exception. If I disconnect one of the ATA's and then reconnect
it, it connects via a different port and now I have keep-alive messages
going to both the old and the new port. In the serctl ul show, I see
the old address still listed there. How do I set these to expire?
Dearease registration interval in ATA. Something like 3 minutes should
be reasonable. Alternatively, you can patch usrloc module to only keep
one registration record per AOR, so that if your ATA is powered down and
then up, the new record will wipe previous one. I can send you a patch
for this if you want.
-Maxim
Thanks,
Stephen
-----Original Message-----
From: Steve Dolloff
Sent: Wednesday, September 17, 2003 10:19 AM
To: Serusers
Subject: [Serusers] NAT with ATA 186
I am trying to enable an ATA 186 to work behind NAT. Is there anyway to
do this without forwarding port 5060 to the ATA? Is nathelper related
to this and if so, where can I find any information on how to use it? I
have the via header option enabled on the ata. Is there something I
need to do on SER?
Thanks,
Stephen
_______________________________________________
Serusers mailing list
serusers(a)lists.iptel.org
http://lists.iptel.org/mailman/listinfo/serusers
_______________________________________________
Serusers mailing list
serusers(a)lists.iptel.org
http://lists.iptel.org/mailman/listinfo/serusers