Re: [Serusers] Sems Error

Hi, Thank you for your reply. Now sems is running now...Thank you so much. When I try to do test call. It show "connected" on my UA but I hear no audio and the session ended. Please advice. Thanks again. <<logNoAudio.txt>> Regards, Shirley > -----Original Message----- > From: Ulrich Abend [SMTP:ullstar@iptel.org] > Sent: Thursday, April 08, 2004 4:15 PM > To: serusers(a)lists.iptel.org > Cc: Shirley > Subject: Re: [Serusers] Sems Error > > Hi, > > from your debugging: > > Apr 8 11:53:41 sipserver2 sems: (7785) DEBUG: loadAppPlugIn > (AmPlugIn.cpp:262): application 'number_reader' loaded. > Apr 8 11:53:41 sipserver2 sems: (7785) WARNING: reloadModuleConfig > (SemsConfiguration.cpp:66): no configuration found for module > number_reader, > maybe you want to specify config.number_reader in config file. > Apr 8 11:53:41 sipserver2 sems: (7785) ERROR: onLoad > (NumberReader.cpp:55): > required parameter number_path missing > Apr 8 11:53:41 sipserver2 sems: (7785) ERROR: load (AmPlugIn.cpp:85): > while > loading plug-in '/usr/local/lib/sems/plug-in/apps/number_reader.so' > > This says that number reader refuses to start and therefor SEMS refuses > to > > start at all. You have two options now: > > 1. configure number_reader to start by supplying valid entries in the > following new section of your sems.conf (edit wav to your valid path!): > > config.number_reader=inline > number_path=wav > prolog_file=wav/prolog.wav > epilog_file=wav/prolog.wav > config.number_reader=end > > 2. remove '/usr/local/lib/sems/plug-in/apps/number_reader.so', then sems > should start. Be careful, if you do a "make install" again, the module > will > be regenerated, you might have to delete it again. > > > I call this a bug in SEMS, we will fix it someday. Modules should start > without any configuration entries. By now, please use one of the options > above. > > > I have also tested this ps ax | grep sems. I get this result:~ > > [root@sipserver2 root]# ps ax | grep sems > > 5518 ? S 1:25 gedit file:///etc/sems/sems.conf > > 7805 pts/0 S 0:00 grep sems > > This shows, that no SEMS is running, from all processes containing "sems" > in > their command line, it's only your editor and the grep command itself. > > Please always view the output of SEMS startup and review all lines > starting > with ERROR. > > Regards, > > Uli. > > On Thursday 08 April 2004 06:05, Shirley wrote: > > Hi, > > > > Thank you for your prompt reply. > > I have tested :~ set log_stderr=yes and fork=no and debug=3 in > > sems.conf. > > > I have attached the log. Please help. > > > > <<SemsError1.txt>> <<sems.conf>> > > I have also tested this ps ax | grep sems. I get this result:~ > > [root@sipserver2 root]# ps ax | grep sems > > 5518 ? S 1:25 gedit file:///etc/sems/sems.conf > > 7805 pts/0 S 0:00 grep sems > > > > Regards, > > Shirley > > > > > -----Original Message----- > > > From: Ulrich Abend [SMTP:ullstar@iptel.org > > > Sent: Thursday, April 08, 2004 12:18 AM > > > To: Shirley > > > Cc: serusers(a)lists.iptel.org > > > Subject: Re: [Serusers] Sems Error > > > > > > Hi, > > > > > > try to set log_stderr=yes and fork=no and debug=3 in sems.conf for > > > testing, it > > > should produce a lot of debugging output on your console when > > > starting up. > > > > > > There are a lot of possible reasons for SEMS not starting, please > > > post the > > > > > > debugging output either from the commands above or from > > /var/log/syslog > > > > (under redhat the file might be another one under /var/log/ ...) > > > > > > You can also check is sems runs by calling in your shell: > > > > > > ps ax | grep sems > > > > > > Regards, > > > > > > Uli. > > > > > > P.S.: Please always CC to the list, others might answer quicker than > > me > > > > :-) > > > > > > On Wednesday 07 April 2004 14:43, Shirley wrote: > > > > Hi, > > > > > > > > Thank you for your reply. How to make sure that the SEMS is > > > > running? I uses the /usr/local/sin/sems.redhat start- to start the > > > > sems > > service? > > > > Am > > > > > > > I correct? > > > > My fifo name is same in both file that you mention. Please advice! > > > > > > Thanks > > > > > > > Regards, > > > > Shirley > > > > > > > > > -----Original Message----- > > > > > From: Ulrich Abend [SMTP:ullstar@iptel.org] > > > > > Sent: Wednesday, April 07, 2004 8:00 PM > > > > > To: serusers(a)lists.iptel.org > > > > > Cc: Shirley > > > > > Subject: Re: [Serusers] Sems Error > > > > > > > > > > Hi, > > > > > > > > > > you should make shure, SEMS is running and uses the same fifo > > > > > name (in sems.conf) as SER (in ser.cfg). > > > > > > > > > > It is also important, that the fifo file (default: /tmp/am_fifo) > > has > > > > > > write > > > > > > > > > > permissions for the user SER runs as. The easiest setup is to run > > SER > > > > and > > > > > > > > SEMS as the same user. > > > > > > > > > > If you still experience problems, please post SER and SEMS > > debugging > > > > > > output, > > > > > the config files, and the results of > > > > > ls -la /tmp/*fifo > > > > > > > > > > Regards, > > > > > > > > > > Uli. > > > > > > > > > > On Wednesday 07 April 2004 12:28, Shirley wrote: > > > > > > Hi all, > > > > > > > > > > > > Please Help!!! I am trying to install the sems when I try to > > start > > > > the > > > > > > > > sems > > > > > > > > > > > I encountered this problem as per below. I am running on Linux > > 9.0 > > > > and > > > > > > > > > please also advice on how to check the fifo version....Thanks > > > > > > > > > > > > Mar 24 19:04:25 sipserver2 /usr/local/sbin/ser[12876]: ERROR: > > > > > > voicemail: ans_machine deamon is not running ! > > > > > > Mar 24 19:04:25 sipserver2 /usr/local/sbin/ser[12876]: ERROR: > > > > > > voicemail: > > > > > > > > > > No > > > > > > > > > > > such device or address > > > > > > Mar 24 19:04:25 sipserver2 /usr/local/sbin/ser[12876]: ERROR: > > > > > > vm_start: > > > > > > write_to_fifo failed > > > > > > Mar 24 19:04:35 sipserver2 /usr/local/sbin/ser[12874]: ERROR: > > > > > > voicemail: ans_machine deamon is not running ! > > > > > > Mar 24 19:04:35 sipserver2 /usr/local/sbin/ser[12874]: ERROR: > > > > > > voicemail: > > > > > > > > > > No > > > > > > > > > > > such device or address > > > > > > Mar 24 19:04:35 sipserver2 /usr/local/sbin/ser[12874]: ERROR: > > > > > > vm_start: > > > > > > write_to_fifo failed > > > > > > > > > > > > regards, > > > > > > shirley > > > > > > > > > > > > _______________________________________________ > > > > > > Serusers mailing list > > > > > > serusers(a)lists.iptel.org > > > > > > http://lists.iptel.org/mailman/listinfo/serusers