[Users] MediaProxy & OpenSER working perfect :)

Dear Tim, Kofi and Friends, As regarding to MediaProxy and OpenSER, below is my config file, i'm using Fedora Core 3, OpenSER 0.9.5, MediaProxy 1.3.1 and it's working :) Please find my working openser.cfg and mediaproxy.ini below. Installation dirs as ; OpenSER Config : /usr/local/etc/openser/ OpenSER Modules : /usr/local/lib/openser/modules/ MediaProxy : /usr/local/mediaproxy/ ** Files "rtp-asymmetric-clients" and "sip-asymmetric-clients" are copied to /usr/local/etc/openser/ which is same with openser.cfg and note that both MediaProxy & OpenSER starts @ boot. Thanks, Ozan <<<<< openser.cfg starts from here >>>>> debug=3 fork=yes log_stderror=no listen=212.XXX.104.YYY # This is where OpenSER installed port=5060 children=4 alias=212.XXX.104.YYY # This is where OpenSER installed dns=no rev_dns=no fifo="/tmp/openser_fifo" fifo_db_url="mysql://openser:openserrw@localhost/openser" loadmodule "/usr/local/lib/openser/modules/mysql.so" loadmodule "/usr/local/lib/openser/modules/sl.so" loadmodule "/usr/local/lib/openser/modules/tm.so" loadmodule "/usr/local/lib/openser/modules/rr.so" loadmodule "/usr/local/lib/openser/modules/maxfwd.so" loadmodule "/usr/local/lib/openser/modules/usrloc.so" loadmodule "/usr/local/lib/openser/modules/registrar.so" loadmodule "/usr/local/lib/openser/modules/auth.so" loadmodule "/usr/local/lib/openser/modules/auth_db.so" loadmodule "/usr/local/lib/openser/modules/uri.so" loadmodule "/usr/local/lib/openser/modules/uri_db.so" loadmodule "/usr/local/lib/openser/modules/mediaproxy.so" loadmodule "/usr/local/lib/openser/modules/nathelper.so" loadmodule "/usr/local/lib/openser/modules/textops.so" loadmodule "/usr/local/lib/openser/modules/domain.so" loadmodule "/usr/local/lib/openser/modules/acc.so" modparam("auth_db", "calculate_ha1", 1) modparam("auth_db", "password_column", "password") modparam("auth_db", "use_domain", 1) modparam("domain", "db_mode", 1) modparam("nathelper", "rtpproxy_disable", 1) modparam("nathelper", "natping_interval", 180) modparam("mediaproxy","natping_interval", 30) modparam("mediaproxy","mediaproxy_socket", "/var/run/mediaproxy.sock") modparam("mediaproxy","sip_asymmetrics","/usr/local/etc/openser/sip-asymmetric-clients") modparam("mediaproxy","rtp_asymmetrics","/usr/local/etc/openser/rtp-asymmetric-clients") modparam("usrloc", "db_mode", 2) modparam("usrloc", "use_domain", 1) modparam("registrar", "default_expires", 60) modparam("registrar", "min_expires", 30) modparam("registrar", "nat_flag", 6) modparam("registrar", "use_domain", 1) modparam("rr", "enable_full_lr", 1) modparam("acc", "db_url", "mysql://openser:openserrw@localhost/openser") modparam("acc", "failed_transactions", 1) modparam("acc", "log_level", 1) modparam("acc", "log_flag", 1) modparam("acc", "db_flag", 1) route { # ----------------------------------------------------------------- # Sanity Check Section # ----------------------------------------------------------------- if (!mf_process_maxfwd_header("10")) { sl_send_reply("483", "Too Many Hops"); break; }; if (msg:len > max_len) { sl_send_reply("513", "Message Overflow"); break; }; # ----------------------------------------------------------------- # Record Route Section and Acc section # ----------------------------------------------------------------- if (method=="INVITE" && client_nat_test("3")) { record_route_preset("212.XXX.104.XXX:5060;nat=yes"); # This is where OpenSER installed } else if (method!="REGISTER") { if!(uri=~"^sip:833[0-9]*@") { record_route(); setflag(1); } }; # ----------------------------------------------------------------- # Call Tear Down Section # ----------------------------------------------------------------- if (method=="BYE" || method=="CANCEL") { end_media_session(); }; # ----------------------------------------------------------------- # Loose Route Section # ----------------------------------------------------------------- if (loose_route()) { if (has_totag() && (method=="INVITE" || method=="ACK")) { if (client_nat_test("3") || search("^Route:.*;nat=yes")) { setflag(6); use_media_proxy(); }; }; route(1); break; }; # ----------------------------------------------------------------- # Call Type Processing Section # ----------------------------------------------------------------- if (uri!=myself) { route(1); break; }; if (uri==myself) { if (method=="CANCEL") { route(3); break; } else if (method=="INVITE") { route(3); break; } else if (method=="REGISTER") { route(2); break; }; lookup("aliases"); if (uri!=myself) { route(1); break; }; if (!lookup("location")) { sl_send_reply("404", "User Not Found"); break; }; }; route(1); } route[1] { # ----------------------------------------------------------------- # Default Message Handler # ----------------------------------------------------------------- t_on_reply("1"); if (!t_relay()) { if (method=="INVITE" || method=="ACK") { end_media_session(); }; sl_reply_error(); }; } route[2] { # ----------------------------------------------------------------- # REGISTER Message Handler # ---------------------------------------------------------------- if (!search("^Contact:\ +\*") && client_nat_test("7")) { setflag(6); fix_nated_register(); force_rport(); }; sl_send_reply("100", "Trying"); if (!www_authorize("","subscriber")) { www_challenge("","0"); break; }; if (!check_to()) { sl_send_reply("401", "Unauthorized"); break; }; consume_credentials(); if (!save("location")) { sl_reply_error(); }; } route[3] { # ----------------------------------------------------------------- # CANCEL and INVITE Message Handler # ----------------------------------------------------------------- if (client_nat_test("3")) { setflag(7); force_rport(); fix_nated_contact(); }; lookup("aliases"); if (uri!=myself) { route(1); break; }; if (uri=~"^sip:0[0-9]*@*") { rewritehost("212.XXX.59.XXX"); # This is where PSTN Gateway installed route(1); break; }; if (!lookup("location")) { sl_send_reply("404", "User Not Found"); break; }; if (method=="CANCEL") { route(1); break; }; if (!proxy_authorize("","subscriber")) { proxy_challenge("","0"); break; } else if (!check_from()) { sl_send_reply("403", "Use From=ID"); break; }; consume_credentials(); if (isflagset(6) || isflagset(7)) { use_media_proxy(); }; route(1); } onreply_route[1] { if ((isflagset(6) || isflagset(7)) && (status=~"(180)|(183)|2[0-9][0-9]")) { if (!search("^Content-Length:\ +0")) { use_media_proxy(); }; }; if (client_nat_test("1")) { fix_nated_contact(); }; } <<<<< openser.cfg ends here >>>>> <<<<< mediproxy.ini starts from here >>>>> [Dispatcher] ;start = yes socket = /var/run/proxydispatcher.sock ;group = ser defaultProxy = /var/run/mediaproxy.sock [MediaProxy] start = yes socket = /var/run/mediaproxy.sock group = ser listen = None allow = None proxyIP = 212.XXX.104.YYY # This is where OpenSER installed portRange = 2000:8000 # These values are set same in ATA's configs for RTP Range TOS = 0xb8 idleTimeout = 60 holdTimeout = 180 forceClose = 0 accounting = off [Accounting] user = root password = host = localhost database = ser table = acc <<<<< mediproxy.ini ends here >>>>>