17 Mar
2004
17 Mar
'04
1:22 a.m.
I can't help you with the cvs version as I never used it (and it will
cause problems as its under heavy developement). If you don't need
IPv4-IPv6 translation and separation of rtpproxy from ser, than I
suggest to use 0.8.12 stable and the corresponding rtpproxy.
ethereal: just sniff all packets without filter. You should see the RTP
streams sent to the IP address and port numbers in the SDP of INVITE and
200 OK.
Watch for ICMP errors.
Klaus
Fábio Silvestri wrote:
I'm using cvs version of ser on outbound proxy,
and tgz of rtpproxy cvs
version of rtpproxy, I got 'rtpproxy syntax error' messages.
Klaus, what kind of information on ethereal I need to look?
Klaus Darilion wrote:
You have to use rtpproxy v20040105 if you're
working with 0.8.12 stable.
What do you mean with "both clients behind a proxy"? The clients are
registered at different proxies? Then only one proxy has to enable the
rtpproxy.
klaus
Fábio Silvestri wrote:
After cvs update on rtpproxy, now I'm getting
this message when running:
# rtpproxy -2f:
rtpproxy: rtpproxy started, pid 1681
rtpproxy: command syntax error
rtpproxy: command syntax error
rtpproxy: command syntax error
rtpproxy: command syntax error
rtpproxy: command syntax error
Fábio Silvestri wrote:
Hi!
I have a outbound proxy configured and working very well, but I have
a little problem, when both clientes are registered on SER and
behind a proxy!
The call's don't work, or the phone rings one time only, and in all
cases the return voice, can't be listen.
Klaus, i'm using a script I have founded from you!
Regards.
Klaus Darilion wrote:
> Hi Fabio!
>
> Just replace your condition in the reply route with my condition.
>
> No, you don't need to any special commands for the rtpproxy.
>
> Yes I have sample cfg - i already postet is ome time ago - search
> the archive.
>
> regards,
> klaus
>
> PS: cc to the list
>
> Fabio Silvestri wrote:
>
>> Well, where do I need to include that code if { } on my ser.cfg?
>>
>> Do you have a sample cfg?
>>
>> How do I need to run rtpproxy, have some special command line?
>>
>> On Mon, 1 Mar 2004, Klaus Darilion wrote:
>>
>>
>>> Date: Mon, 01 Mar 2004 09:35:12 +0100
>>> From: Klaus Darilion <klaus.mailinglists(a)pernau.at>
>>> To: Fábio Silvestri <fabio(a)informatec.com.br>
>>> Cc: serusers(a)lists.iptel.org
>>> Subject: Re: [Serusers] SER and rtpproxy
>>>
>>>
>>>
>>> Fábio Silvestri wrote:
>>>
>>>
>>>> Hi!
>>>>
>>>> After a long search on maillinst, I'm trying to run SER with
>>>> rtpproxy, for resolve problems with SIP UA (ata186) behind a
>>>> nat, but I'm still get in trouble.
>>>>
>>>> I have setup ser.cfg to use rtpproxy, like this:
>>>>
>>>> ...
>>>> if (method=="INVITE") {
>>>> log(1,"INVITE\n");
>>>> fix_nated_sdp("1");
>>>> record_route();
>>>> force_rport();
>>>> setflag(1);
>>>> force_rtp_proxy();
>>>> t_on_reply("1");
>>>> }
>>>> ...
>>>> onreply_route[1] {
>>>> log(1, ">=====> reply 1\n");
>>>> if ((status=~"[12][0-9][0-9]")) {
>>>> force_rtp_proxy();
>>>> }
>>>> }
>>>> ...
>>>>
>>>> But I get this error on syslog:
>>>>
>>>> 0(5463) ERROR: extract_mediaip: no `c=' in SDP
>>>>
>>>
>>> This will happen when you try to rewrite a response without sdp,
>>> e.g. 100 trying, 180 ringing....
>>>
>>> I'm unsing:
>>> if ( (status=~"200" || status=~"183") ) {
>>> force_rtp_proxy();
>>>
>>>
>>>> I'm running rtpproxy, on linux shell without any parameters.
>>>>
>>>> Does anybody knows what this means that message, and how to
>>>> solve, a ser.cfg for rtpproxy, and others tips will be helpfull...
>>>>
>>>> Regards.
>>>>
>>>
>>
>
> _______________________________________________
> Serusers mailing list
> serusers(a)lists.iptel.org
> http://lists.iptel.org/mailman/listinfo/serusers
>