Re: [SR-Users] ASYNC Module

Aaron, On 06/12/2015 07:10 PM, Aaron Hamstra wrote: In this case, the committer's comment that "it can be enabled by defining ENABLE_ASYNC_MUTEX" does not refer to preprocessor #!defines within the Kamailio route script, but rather preprocessor defines within the C source code, from which the former take their inspiration. :-) sasha@saurus:~/kamailio$ fgrep -HR ENABLE_ASYNC_MUTEX . ./modules/tm/h_table.h:#ifdef ENABLE_ASYNC_MUTEX ./modules/tm/lock.c:#ifdef ENABLE_ASYNC_MUTEX ./modules/tm/lock.c:#ifdef ENABLE_ASYNC_MUTEX ./modules/tm/lock.c:#ifdef ENABLE_ASYNC_MUTEX ./modules/tm/lock.c:#ifdef ENABLE_ASYNC_MUTEX ./modules/tm/lock.c:#ifdef ENABLE_ASYNC_MUTEX ./modules/tm/lock.c:#endif /* ENABLE_ASYNC_MUTEX */ ./modules/tm/t_suspend.c:#ifdef ENABLE_ASYNC_MUTEX ./ChangeLog: - it can be enabled by defining ENABLE_ASYNC_MUTEX So, if that's a bit you want to toggle, so to speak, you'll want to go into modules/tm/defs.h and add: #define ENABLE_ASYNC_MUTEX Be sure to do so between these lines: #ifndef _TM_DEFS_H #define _TM_DEFS_H ... #define ENABLE_ASYNC_MUTEX 1 /* you add this */ #endif And don't confuse the Kamailio-style #!define with the C-style #define -- in this case, you want the latter. Then, rebuild the 'tm' module by executing a 'make install' in that directory, and restart Kamailio. -- Alex Balashov | Principal | Evariste Systems LLC 303 Perimeter Center North, Suite 300 Atlanta, GA 30346 United States Tel: +1-800-250-5920 (toll-free) / +1-678-954-0671 (direct) Web: http://www.evaristesys.com/, http://www.csrpswitch.com/