On Thu, Feb 19, 2009 at 11:25 AM, Asim Riaz <
ariaz78@gmail.com> wrote:
>
>
> On Thu, Feb 19, 2009 at 4:16 PM, Ovidiu Sas <
osas@voipembedded.com> wrote:
>>
>> Is your R-URI starting with a '0'?
>> You have defined a single route for all '0' prefix destinations.
>
> yes R-URI is starting with 0.
>>
>>
>> Regards,
>> Ovidiu Sas
>>
>> On Thu, Feb 19, 2009 at 11:06 AM, Asim Riaz <
ariaz78@gmail.com> wrote:
>> >
>> >
>> > On Thu, Feb 19, 2009 at 3:53 PM, Daniel-Constantin Mierla
>> > <
miconda@gmail.com> wrote:
>> >>
>> >> Hello,
>> >>
>> >> On 02/19/2009 05:34 PM, Asim Riaz wrote:
>> >>>
>> >>> Hello,
>> >>> I am using LCR, for some reason load_gws() function is not finding the
>> >>> gateway in DB, it was working in the start then added some more routes
>> >>> and
>> >>> after that everything stopped working, I am not sure where to start
>> >>> troubleshooting, any idea ?
>> >>
>> >> run kamailio with higher debug mode (e.g., debug=5) in configuration
>> >> file.
>> >>
>> >> You should get more debug messages in the syslog, that may give you
>> >> some
>> >> hints. look for lines containing 'lcr'.
>> >>
>> >> Cheers,
>> >> Daniel
>> >
>> > Hi Daniel,
>> > I tried higher debug level, not getting anything related to LCR all i
>> > am
>> > getting XLOG messages "unable to find Gateway".
>> >
>> > Thanks,
>> >
>> > Asim
>> >
>> >>
>> >>>
>> >>> kamctl lcr show
>> >>>
>> >>> lcr routes
>> >>> +----+--------+----------+--------+----------+
>> >>> | id | prefix | from_uri | grp_id | priority |
>> >>> +----+--------+----------+--------+----------+
>> >>> | 9 | 0 | | 1 | 1 |
>> >>> +----+--------+----------+--------+----------+
>> >>> lcr gateways
>> >>>
>> >>>
>> >>> +------------+---------------+------+------------+-----------+--------+-------+------+-------+
>> >>> | gw_name | ip_addr | port | uri_scheme | transport | grp_id
>> >>> |
>> >>> strip | tag | flags |
>> >>>
>> >>>
>> >>> +------------+---------------+------+------------+-----------+--------+-------+------+-------+
>> >>> | XXXX | XXXX | 5060 | 1 | 1 | 1 |
>> >>> 0
>> >>> | | 0 |
>> >>>
>> >>>
>> >>> +------------+---------------+------+------------+-----------+--------+-------+------+-------+
>> >>>
>> >>>
>> >>>
>> >>> my routing script
>> >>>
>> >>> if(!load_gws()) {
>> >>> xlog("L_INFO", "[ROUTE-X] Unable To Find Gateway ");
>> >>> sl_send_reply("503", "unable to find gateway");
>> >>> exit;
>> >>> }
>> >>> Thanks in advance.
>> >>>
>> >>> Asim
>> >>>
>> >>> ------------------------------------------------------------------------
>> >>>
>> >>> _______________________________________________
>> >>> Kamailio (OpenSER) - Users mailing list
>> >>>
Users@lists.kamailio.org
>> >>>
http://lists.kamailio.org/cgi-bin/mailman/listinfo/users
>> >>>
http://lists.openser-project.org/cgi-bin/mailman/listinfo/users
>> >>
>> >> --
>> >> Daniel-Constantin Mierla
>> >>
http://www.asipto.com
>> >>
>> >
>> >
>> > _______________________________________________
>> > Kamailio (OpenSER) - Users mailing list
>> >
Users@lists.kamailio.org
>> >
http://lists.kamailio.org/cgi-bin/mailman/listinfo/users
>> >
http://lists.openser-project.org/cgi-bin/mailman/listinfo/users
>> >
>
>