Re: [Users] call performance

On Mon, July 24, 2006 22:11, Daniel-Constantin Mierla said:

Hello,

On 07/24/06 14:39, Klaus Darilion wrote:

...

Hi!

I tried to test openser's call setup performance. Scenario: INVITE - 180 - 200

Server: 2 x P3 1266MHz

listen=UDP:... children=100

I used SIPP for testing.

I used sipp and the simplest openser config (just forward() ) and couldn't get very good. It seems that the limitation comes from sipp. You can try to use multiple sipp servers shooting at same openser to see if you see some differences. CPU used by openser was insignificant when the peak of cps was achieved.

maybe I found some more severs for generating load :-) I also suspect SIPP to generate wrong messages sometimes and it crashes during high load when using multiple TLS connections.

...

2. With children = 100, I can see more than 200 threads and lots of

unix sockets opened, although no DB is used. Why?

the number of children is related to the number of interfaces openser listens to and the type of transport protocol enabled (UDP, TCP).

only one UDP socket: no TCP, no TLS, no loopback-device. strange.

graham:/home/darilion# ps -Alf|grep openser.pid|wc 205 4504 29060

openser.cfg:

debug=3 # debug level (cmd line: -dddddddddd) fork=yes log_stderror=no # (cmd line: -E)

check_via=no # (cmd. line: -v) dns=no # (cmd. line: -r) rev_dns=no # (cmd. line: -R) port=5060 children=100 fifo="/tmp/openser_fifo"

listen=udp:83.136.32.132:5060

disable_tls = 0 tls_verify_client = 0 tls_verify_server = 0 tls_require_client_certificate = 0 tls_method = TLSv1 tls_certificate = "/etc/openser/tls/user/user-cert.pem" tls_private_key = "/etc/openser/tls/user/user-privkey.pem" tls_ca_list = "/etc/openser/tls/user/user-calist.pem"

what is the name of the opened unixsock?

what is a name of a socket? I only see:

graham:/home/darilion# netstat -anp|grep openser udp 0 0 83.136.32.132:5060 0.0.0.0:* 3690/openser unix 3 [ ] STREAM CONNECTED 41582 3892/openser unix 3 [ ] STREAM CONNECTED 41581 3690/openser unix 3 [ ] STREAM CONNECTED 41580 3892/openser unix 3 [ ] STREAM CONNECTED 41579 3690/openser unix 3 [ ] STREAM CONNECTED 41576 3891/openser unix 3 [ ] STREAM CONNECTED 41575 3690/openser unix 3 [ ] STREAM CONNECTED 41574 3891/openser unix 3 [ ] STREAM CONNECTED 41573 3690/openser unix 3 [ ] STREAM CONNECTED 41572 3890/openser unix 3 [ ] STREAM CONNECTED 41571 3690/openser ...

...

3. openser core dumps when children=200

Any backtrace?

I try to reproduce them.

regards klaus

Cheers, Daniel

...

regards klaus

# # $Id: openser.cfg,v 1.5 2005/10/28 19:45:33 bogdan_iancu Exp $ # # simple quick-start config script #

# ----------- global configuration parameters ------------------------

debug=3 # debug level (cmd line: -dddddddddd) fork=yes log_stderror=no # (cmd line: -E)

/* Uncomment these lines to enter debugging mode fork=no log_stderror=yes */

check_via=no # (cmd. line: -v) dns=no # (cmd. line: -r) rev_dns=no # (cmd. line: -R) port=5060 children=100 fifo="/tmp/openser_fifo"

listen=udp:83.136.32.132:5060 #listen=tcp:83.136.32.132:5060 #listen=tls:83.136.32.132:5061

# # uncomment the following lines for TLS support #disable_tls = 0 #tls_verify_client = 0 #tls_verify_server = 0 #tls_require_client_certificate = 0 #tls_method = TLSv1 #tls_certificate = "/etc/openser/tls/user/user-cert.pem" #tls_private_key = "/etc/openser/tls/user/user-privkey.pem" #tls_ca_list = "/etc/openser/tls/user/user-calist.pem"

# ------------------ module loading ----------------------------------

# Uncomment this if you want to use SQL database #loadmodule "/usr/lib/openser/modules/mysql.so"

loadmodule "/usr/lib/openser/modules/sl.so" loadmodule "/usr/lib/openser/modules/tm.so" loadmodule "/usr/lib/openser/modules/rr.so" loadmodule "/usr/lib/openser/modules/maxfwd.so" loadmodule "/usr/lib/openser/modules/usrloc.so" loadmodule "/usr/lib/openser/modules/registrar.so" loadmodule "/usr/lib/openser/modules/textops.so" loadmodule "/usr/lib/openser/modules/avpops.so" loadmodule "/usr/lib/openser/modules/xlog.so"

# Uncomment this if you want digest authentication # mysql.so must be loaded ! #loadmodule "/usr/lib/openser/modules/auth.so" #loadmodule "/usr/lib/openser/modules/auth_db.so"

# ----------------- setting module-specific parameters ---------------

# -- usrloc params --

modparam("usrloc", "db_mode", 0)

# Uncomment this if you want to use SQL database # for persistent storage and comment the previous line #modparam("usrloc", "db_mode", 2)

# -- auth params -- # Uncomment if you are using auth module # #modparam("auth_db", "calculate_ha1", yes) # # If you set "calculate_ha1" parameter to yes (which true in this config), # uncomment also the following parameter) # #modparam("auth_db", "password_column", "password")

# -- rr params -- # add value to ;lr param to make some broken UAs happy modparam("rr", "enable_full_lr", 1)

# ------------------------- request routing logic -------------------

# main routing logic

route{

    # initial sanity checks -- messages with
    # max_forwards==0, or excessively long requests
    if (!mf_process_maxfwd_header("10")) {
            sl_send_reply("483","Too Many Hops");
            exit;
    };

    if (msg:len >=  2048 ) {
            sl_send_reply("513", "Message too big");
            exit;
    };

    # we record-route all messages -- to make sure that
    # subsequent messages will go through our proxy; that's
    # particularly good if upstream and downstream entities
    # use different transport protocol
    if (!method=="REGISTER")

            record_route();

    # subsequent messages withing a dialog should take the
    # path determined by record-routing
    if (loose_route()) {
            # mark routing logic in request
            append_hf("P-hint: rr-enforced\r\n");
            route(1);
    };

avp_printf("$avp(s:target)","sip:83.136.32.134;transport=udp"); avp_pushto("$ru","$avp(s:target)");

t_relay(); exit;

    if (!uri==myself) {
            # mark routing logic in request
            append_hf("P-hint: outbound\r\n");
            # if you have some interdomain connections via TLS
            #if(uri=~"@tls_domain1.net") {
            #       t_relay_to_tls("IP_domain1","port_domain1");
            #       exit;
            #} else if(uri=~"@tls_domain2.net") {
            #       t_relay_to_tls("IP_domain2","port_domain2");
            #       exit;
            #}
            route(1);
    };

    # if the request is for other domain use UsrLoc
    # (in case, it does not work, use the following command
    # with proper names and addresses in it)
    if (uri==myself) {

            if (method=="REGISTER") {

                    # Uncomment this if you want to use digest

authentication #if (!www_authorize("openser.org", "subscriber")) { # www_challenge("openser.org", "0"); # exit; #};

                    save("location");
                    exit;
            };

            lookup("aliases");
            if (!uri==myself) {
                    append_hf("P-hint: outbound alias\r\n");
                    route(1);
            };
            # native SIP destinations are handled using our USRLOC

DB if (!lookup("location")) { sl_send_reply("404", "Not Found"); exit; }; append_hf("P-hint: usrloc applied\r\n"); };

    route(1);

}

route[1] { # send it out now; use stateful forwarding as it works reliably # even for UDP2TCP if (!t_relay()) { sl_reply_error(); }; exit; }

---

Users mailing list Users@openser.org http://openser.org/cgi-bin/mailman/listinfo/users