On Tue, May 17, 2016 at 05:08:45PM +0300, Mx R wrote:
> In our network we used several ONT Huawei models. But with one model
> HUAWEI-EchoLife HG8245 / V1R003C00S205 we have the following problem. When
> connecting to this device in the POTS ports of the two phones. From the
> first port we can not call to the second and from the second port can not
> call to the first port. On the other ONT Huawei devices, there is no such
> problem. Earlier we had set OpenSIP and this device did not have a problem.
>
> The problem is likely in the configuration because it works at the default
> settings.
In the past I ran into other devices/PBXs that can't handle the fact
there is an outgoing/incoming call with the same callid. You could try
the topoh module (with modparam("topoh", "mask_callid", 1))
Beware that it might introduce other problems in some calls scenarios,
my prefered solution is to route the call to a b2bua (asterisk) when I
detected hairpinning.
_______________________________________________
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
sr-users@lists.sip-router.org
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users