23 Jun
2006
23 Jun
'06
3:47 a.m.
On 06/21/06 13:14, Shenen Shenen wrote:
I've removed the listen parameters....fork was
alway set like
fork=yes....with openser command I've this;
[root@asterisk12 ~]# openser
0(3357) WARNING: fix_socket_list: could not rev. resolve
192.168.251.12 <http://192.168.251.12>
0(3357) WARNING: fix_socket_list: could not rev. resolve
192.168.251.200 <http://192.168.251.200>
0(3357) WARNING: fix_socket_list: could not rev. resolve
192.168.251.12 <http://192.168.251.12>
0(3357) WARNING: fix_socket_list: could not rev. resolve
192.168.251.200 <http://192.168.251.200>
Listening on
udp: 127.0.0.1 <http://127.0.0.1> [127.0.0.1
<http://127.0.0.1>]:5070
udp: 192.168.251.12 <http://192.168.251.12> [
192.168.251.12 <http://192.168.251.12>]:5070
udp: 192.168.251.200 <http://192.168.251.200>
[192.168.251.200 <http://192.168.251.200>]:5070
tcp: 127.0.0.1 <http://127.0.0.1> [ 127.0.0.1
<http://127.0.0.1>]:5070
tcp: 192.168.251.12 <http://192.168.251.12>
[192.168.251.12 <http://192.168.251.12>]:5070
tcp: 192.168.251.200 <http://192.168.251.200>
[192.168.251.200 <http://192.168.251.200>]:5070
Aliases:
tcp: localhost:5070
udp: localhost:5070
stateless - initializing
0(0) Maxfwd module- initializing
0(0) AUTH module - initializing
0(0) AUTH_DB module - initializing
[root@asterisk12 ~]# 0(0) INFO: udp_init: SO_RCVBUF is initially 110592
0(0) INFO: udp_init: SO_RCVBUF is finally 221184
0(0) INFO: udp_init: SO_RCVBUF is initially 110592
0(0) INFO: udp_init: SO_RCVBUF is finally 221184
0(0) INFO: udp_init: SO_RCVBUF is initially 110592
0(0) INFO: udp_init: SO_RCVBUF is finally 221184
0(0) ERROR: tcp_init: bind(7, 0x811b12c, 16) on 127.0.0.1:5070
<http://127.0.0.1:5070> : Address already in use
........so, where could be the problem now?
as you can see from the list of ip
addresses found by openser, you have
no network interface configured with 192.168.251.11. It is why you got
errors highlighted in the previous messages. Now, it seems that there is
another process using port 5070. Check if it is openser already running.
Do "netstat -alut" and see if some application is running on port 5070.
Cheers,
Daniel
On 6/21/06, *Daniel-Constantin Mierla* <daniel(a)voice-system.ro
<mailto:daniel@voice-system.ro>> wrote:
On 06/21/06 12:44, Shenen Shenen wrote:
like the
No,this isn't the problem;I've changed
the port on my openser like
5070, and asterisk is set like 5060 in sip.conf, but I've always the
same error;
Jun 21 03:33:43 asterisk12 openser[19037]: ERROR: udp_init: bind(6,
0x8119a1c, 16) on 192.168.251.11 <http://192.168.251.11>
<http://192.168.251.11/> <
http://192.168.251.11/>gt;: Cannot assign
requested address
.....what could be?
do you have a network interface configured with the IP
192.168.251.11 <http://192.168.251.11>?
Do 'ifconfig' to check it out.
You can remove the 'listen' parameters from your config file and
openser
will bind to available interfaces -- do not forget to set fork=yes,
otherwise openser will listen to the first interface it founds,
and that
is usually 127.0.0.1 <http://127.0.0.1>.
Daniel
On 6/21/06, *Daniel-Constantin Mierla* <daniel(a)voice-system.ro
<mailto:daniel@voice-system.ro>
<mailto:daniel@voice-system.ro
<mailto:daniel@voice-system.ro>>>
wrote:
You can safely ignore reverse resolve DNS messages, they are
warnings
meaning no hostname was found set for those
IP addresses -
openser
tries
to get them in the aliases list. The problem comes from line:
Jun 21 03:33:43 asterisk12 openser[19037]: ERROR: udp_init:
bind(6,
0x8119a1c, 16) on 192.168.251.11
<http://192.168.251.11>
<http://192.168.251.11
<http://192.168.251.11>> <
http://192.168.251.11/>gt;: Cannot assign
requested address
This means that you do not have the IP 192.168.251.11
<http://192.168.251.11>
<http://192.168.251.11> configured on
the
system. Do you have asterisk and openser listening on the
same port
(5060)? You must use different ports.
Cheers,
Daniel
On 06/21/06 10:55, Shenen Shenen wrote:
box to
Hi!This my openser.cfg;I've 2 asteriskathome
with openser
installed;I
> want to copy the authentificated sip registration from one > another and have always the same Sip
registered in all 2
box, so if
> one box falls down the other can run
without reinitialized
all the
> sips (like Phoner..cubix...and also IP
phones...)....I'm
using
vrrpd...12 is the master, 11 is the slave, 200 is the virtual
IP(this
> point to the master in the first case..and all Sip proxies > phoner or cubix points to the master..(I
can set only 1
proxy..
> 192.168.251.200
<http://192.168.251.200>
<http://192.168.251.200>
<http://192.168.251.200/> ..in x-lite I
can set more
> proxies and I'vent problems..)(for this I must use openser..)
>
>
> This is the openser on the "slave" 192.168.251.11
<http://192.168.251.11>
<http://192.168.251.11>
<http://192.168.251.11/>
<http://192.168.251.12>
# SCRIPT PER COPIARE LO STATO DELLE REGISTRAZIONI DEI SIP DAL
.11 al .12
# ----------- global configuration parameters
------------------------
>
> debug=3 # debug level (cmd line: -dddddddddd)
> fork=no
> log_stderror=no # (cmd line: -E)
> listen= 192.168.251.12 <http://192.168.251.12> <http://192.168.251.12/>
> listen=192.168.251.11 <http://192.168.251.11>
<http://192.168.251.11> <
http://192.168.251.11/>
<http://192.168.251.12>
listen=192.1668.251.200
port=5060
children=5
dns=no
rev_dns=no
# ------------------ module loading
----------------------------------
loadmodule "modules/mysql/mysql.so"
loadmodule "modules/sl/sl.so"
loadmodule "modules/tm/tm.so"
loadmodule "modules/maxfwd/maxfwd.so"
loadmodule "modules/usrloc/usrloc.so"
loadmodule "modules/registrar/registrar.so"
loadmodule "modules/auth/auth.so"
loadmodule "modules/auth_db/auth_db.so"
# ----------------- setting module-specific parameters
---------------
# digest generation secret; use the same in backup server;
# also, make sure that the backup server has sync'ed time
modparam("auth", "secret", "alsdkhglaksdhfkloiwr")
# ------------------------- request routing logic
-------------------
>
> # main routing logic
>
> route{
>
> # initial sanity checks -- messages with
> # max_forwars==0, or excessively long requests
> if (!mf_process_maxfwd_header("10")) {
> sl_send_reply("483","Too Many Hops");
> return;
> };
> if (len_gt( max_len )) {
> sl_send_reply("513", "Message too big");
> return;
> };
>
> # if the request is for other domain use UsrLoc
> # (in case, it does not work, use the following command
> # with proper names and addresses in it)
> if (uri==myself) {
>
> if (method=="REGISTER") {
>
> # verify credentials
> if (!www_authorize("", "subscriber")) {
> www_challenge("", "0");
> return;
> };
>
> # if ok, update contacts and ...
> save("location");
> # ... if this REGISTER is not a replica from our
> # peer server, replicate to the peer server
> if (!src_ip== 192.168.251.12 <http://192.168.251.12> < http://192.168.251.12/>) {
> t_replicate("192.168.251.12 <http://192.168.251.12>
<http://192.168.251.12>
<http://192.168.251.12/>",
"5060");
> };
> return;
> };
> # do whatever else appropriate for your domain
> log("non-REGISTER\n");
> };
> }
>
>
>
> This is the openser on the "master" 192.168.251.12
<http://192.168.251.12>
<http://192.168.251.12>
<http://192.168.251.12> <
<http://192.168.251.12/ >
# SCRIPT PER COPIARE LO STATO DELLE REGISTRAZIONI DEI SIP DAL
.12 al .11
# ----------- global configuration parameters
------------------------
>
> debug=3 # debug level (cmd line: -dddddddddd)
> fork=no
> log_stderror=yes # (cmd line: -E)
> listen= 192.168.251.12 <http://192.168.251.12> http://192.168.251.12/>
> listen= 192.168.251.11 <http://192.168.251.11>
<http://192.168.251.11>
<http://192.168.251.11/>
<http://192.168.251.11>
listen=192.1668.251.200
port=5060
children=5
dns=no
rev_dns=no
# ------------------ module loading
----------------------------------
loadmodule "modules/mysql/mysql.so"
loadmodule "modules/sl/sl.so"
loadmodule "modules/tm/tm.so"
loadmodule "modules/maxfwd/maxfwd.so"
loadmodule "modules/usrloc/usrloc.so"
loadmodule "modules/registrar/registrar.so"
loadmodule "modules/auth/auth.so"
loadmodule "modules/auth_db/auth_db.so"
# ----------------- setting module-specific parameters
---------------
# digest generation secret; use the same in backup server;
# also, make sure that the backup server has sync'ed time
modparam("auth", "secret", "alsdkhglaksdhfkloiwr")
# ------------------------- request routing logic
-------------------
>
> # main routing logic
>
> route{
>
> # initial sanity checks -- messages with
> # max_forwars==0, or excessively long requests
> if (!mf_process_maxfwd_header("10")) {
> sl_send_reply("483","Too Many Hops");
> return;
> };
> if (len_gt( max_len )) {
> sl_send_reply("513", "Message too big");
> return;
> };
>
> # if the request is for other domain use UsrLoc
> # (in case, it does not work, use the following command
> # with proper names and addresses in it)
> if (uri==myself) {
>
> if (method=="REGISTER") {
>
> # verify credentials
> if (!www_authorize("", "subscriber")) {
> www_challenge("", "0");
> return;
> };
>
> # if ok, update contacts and ...
> save("location");
> # ... if this REGISTER is not a replica from our
> # peer server, replicate to the peer server
> if (!src_ip== 192.168.251.11 <http://192.168.251.11> < http://192.168.251.11/>) {
> t_replicate("192.168.251.11 <http://192.168.251.11>
<http://192.168.251.11>
<http://192.168.251.11/>",
"5060");
> };
> return;
> };
> # do whatever else appropriate for your domain
> log("non-REGISTER\n");
> };
> }
>
> If I run the following command... I've problems with
resolution
of IP
> addresses... how can I resolve this problem??????????
>
> 100000000000000000000000000000000000000000000000000000
> thanks.....................help me please!!!!!I'm becoming
crazy...
>
>
> [ root@asterisk12 ~]# tail -f /var/log/messages
> Jun 21 03:33:43 asterisk12 openser: WARNING:
fix_socket_list: could
> not rev. resolve 192.168.251.11
<http://192.168.251.11> <
http://192.168.251.11>
<http://192.168.251.11/>
> Jun 21 03:33:43 asterisk12 openser: WARNING:
fix_socket_list: could
> not rev. resolve 192.168.251.200
<http://192.168.251.200>
<http://192.168.251.200>
<http://192.168.251.200/>
SO_RCVBUF
Jun 21 03:33:43 asterisk12 openser[19037]: Maxfwd
module-
initializing
Jun 21 03:33:43 asterisk12 openser[19037]: AUTH
module -
initializing
Jun 21 03:33:43 asterisk12 openser[19037]:
AUTH_DB module -
initializing
Jun 21 03:33:43 asterisk12 openser[19037]: INFO:
udp_init:
SO_RCVBUF
> is initially 110592
> Jun 21 03:33:43 asterisk12 openser[19037]: INFO: udp_init: > is finally 221184
> Jun 21 03:33:43 asterisk12 openser[19037]: INFO: udp_init:
SO_RCVBUF
> is initially 110592
> Jun 21 03:33:43 asterisk12 openser[19037]: INFO: udp_init:
SO_RCVBUF
> is finally 221184
> Jun 21 03:33:43 asterisk12 openser[19037]: ERROR:
udp_init: bind(6,
> 0x8119a1c, 16) on 192.168.251.11
<http://192.168.251.11> <
http://192.168.251.11>
<http://192.168.251.11/>: Cannot
assign requested address
Jun 21 03:34:01 asterisk12 crond(pam_unix)[19040]: session
opened for
user root by (uid=0)
Jun 21 03:34:01 asterisk12 crond(pam_unix)[19040]: session
closed for
user root