In this case Asterisk will be bottle neck of whole system.. 50-100 calls because of g729
But why do you need SER in this case? that gonna be extremely unscallable system (not because of SER but because of asterisk). You can use simple asterisk to get same functionality.
In my system, SER is registrar and NAT traversal (you need it to do SIP-SIP calls). Then I have b2bua to do CDR and digit manipulation and then it goes to termination carrier
Asterisk as b2bua is kind of expensive in my opinion. Not so stable and take a lot of resources. Whenever I send call thru Asterisk I notice that overall quality go down. May be it just because I do not like asterisk :)
If you in your setup will do same as in mine but instead of B2BUA use Asterisk, then it will be scalable quite nice by just increasing amount of asterisk servers
-----Original Message----- From: Mik Cheez [mailto:michael_bulk@wildgate.com] Sent: Friday, February 25, 2005 11:55 AM To: Vitaly Nikolaev; serusers@lists.iptel.org Subject: Re: [Serusers] SER+Asterisk on high loads
How about the following scenario:
One box acting as a proxy to a PSTN. Asterisk is handed the initial request (port 5060) in order to do some modifying of the packet (callID), and to keep a stateful connection for CDR's. Asterisk passes it to SER (port 5061 on the same box) which uses its logic to route the call to one of several PSTN's. All of this is done in g729.
Why do it this way?
SER cannot modify the callID without having issues. I don't trust SER to do the CDR, and logging on the endpoint is very difficult compared to Asterisk.
Any idea what the load maximum would be with that same P4 3.X/Xeon?
Best regards
Vitaly Nikolaev wrote:
SER + Astrersik can handle UNLIMITED simultaneous callas, but for that you have to have unlimited servers working as a cluster :)
I would never recommend to have asterisk and ser on one machnine, asterisk that will work on separate machine with P4 3.X/Xeon terminationg calls to PSTN can handle up to 100 calls easily.
SER with rtpproxy on one server can handle REGISTRATIONS from 10000
clients.
Even if they will do it every 30 sec (depend of course how u gonna authenticate them)
RTPPROXY can handle much more then 100 calls (what codec btw ?) plus you
can
distribute SER to different machines to work in a cluster OR you can use mediaproxy or nathelper in same cluster mode.
Btw, I believe you not gonna let all calls trough asterisk ? asterisk is only for termination to PSTN ? otherwise forget what I wrote :)
On 2/25/2005, "alexey@home.kovyrin.net" alexey@home.kovyrin.net wrote:
Hello, All!
There is some questions about subj. With what loads SER+Asterisk can be used? I need to know, what number of simultaneous registrations and simultaneous calls can handle this conplex? It'll be very good, if someone can say his success story about SER+Asterisk.
Now, we're planning 1000-10000 clients... can SER handle this number of registrations? And can SER+Asterisk (assume that almost all users are using NAT) can handle calls of 0.1-1% of above clients base?
Great thanks to all for answers.
-- /Scoundrel
Serusers mailing list serusers@lists.iptel.org http://lists.iptel.org/mailman/listinfo/serusers
Serusers mailing list serusers@lists.iptel.org http://lists.iptel.org/mailman/listinfo/serusers
Serusers mailing list serusers@lists.iptel.org http://lists.iptel.org/mailman/listinfo/serusers