Re: [SR-Users] Kamailio IMS deployment

Hi, the p-, i- and scscf.sh files are not required, because these are from the origin OpenIMScore which I installed in an intermediate step (which led to an step4-image with origin OpenIMScore). Unfortunately the log-file which I provided yesterday also included this part. I now have updated the log-file (attached) and eliminated this part (step4) which is not relevant for IMS on Kamailio. Now, how to start the platform: HSS: see line 591 – 596 P-CSCF: line 609 kamailio -f /usr/local/etc/kamailio/kamailio-pcscf.cfg I-CSCF: line 614 kamailio -f /usr/local/etc/kamailio/kamailio-icscf.cfg S-CSCF: line 621 kamailio -f /usr/local/etc/kamailio/kamailio-scscf.cfg Additional info: I configured for testing the kamailio -instances to run in foreground. Therefore you need at least 4 console windows (HSS, P-, I- and S-CSCF). For starting tcpdump for trace-file you need a 5th console. I prefer to use “screen” command to generate the different screens. I hope that helps. For the basic call I used two IMS clients (“Mercuro Silver” and “Boghe”) running on the Windows host. The clients are configured as Alice and Bob with authentication AKAv1-MD5. Authentication data are in HSS preconfigured. If you do not have IMS clients you can start with pure SIP-clients (using digest authentication MD5 instead of AKAv1-MD5). But for that you have to change the REG_AUTH_DEFAULT_ALG parameter in scscf.cfg accordingly. And probably also the default authentication scheme in HSS (USER IDENTITIES -> Private Identity). I did not test this. But in case of problems you should provide a tracefile produced with “tcpdump -i any -s 3000 -w /var/tmp/trace.pcap not port 22 and not port 3306”. Good luck. Franz From: Ramya Y [mailto:y.ramya146@gmail.com] Sent: Thursday, January 7, 2016 3:13 PM To: Daniel-Constantin Mierla &lt;miconda(a)gmail.com&gt;om>; Kamailio (SER) - Users Mailing List &lt;sr-users(a)lists.sip-router.org&gt; Cc: franz.edler(a)technikum-wien.at Subject: Re: [SR-Users] Kamailio IMS deployment Hi Franz, could you please provide me small description about how to start all nodes(HSS,P/I/S-CSCF and basic call. it would be more helpful to me. And also i was unable to find ./p,i,scscf.sh files under root as described in the log file but i can see only hss.sh . Thanks in advance! Regards, Ramya. On Thu, Jan 7, 2016 at 2:45 PM, Daniel-Constantin Mierla &lt;miconda(a)gmail.com <mailto:miconda@gmail.com> > wrote: Hello, thanks for sharing these, I expect to help a lot the people starting to build an IMS core with Kamailio. If you can send me a short description of the IMS network you built with these configs, I would like to post a news article on kamailio.org <http://kamailio.org> to make it more visible. Cheers, Daniel On 06/01/16 16:09, Franz Edler wrote: Hi Ramya, I now succeeded to configure a stripped down version of Kamilio IMS. Here is my log-file and the config-files used: https://www.dropbox.com/s/ehkzi9pbhlp7njc/Kamailio-IMS%20config-files.zip?d… As you can see in the log-file I used several steps to configure the IMS platform. The last step (step 5) contains basic Kamailio and basic IMScore. For the configuration of the IMS core I disabled all additional functions (NAT, dispatcher, SBC …etc) which are not necessary for the core function. I kept the configuration scheme of the original OpenIMSCore using same IP-address but different ports for P-CSCF (4060), I-CSCF (5060) and S-CSCF (6060). I hope I have included all relevant files. And here is the VMware-image of the last step 5: https://www.dropbox.com/s/pwwx009hiigt27v/Debian_8.2-step5-basicKamailio%26… For the VMware configuration I used the following IP addresses: 10.0.0.9 the Kamailio guest system 10.0.0.10 the host system (Windows Notebook) I hope that fits for you. In case of any questions you may ask. BR Franz From: sr-users [mailto:sr-users-bounces@lists.sip-router.org] On Behalf Of Ramya Y Sent: Wednesday, December 2, 2015 10:46 AM To: sr-users(a)lists.sip-router.org <mailto:sr-users@lists.sip-router.org> Subject: [SR-Users] Kamailio IMS deployment Hi, I am newbie to kamailio world and we would like to deploy Kamailio based IMS platform. Can any body share the link or Step by step procedure(user Guide) to deploy Kamailio IMS. Regards, Ramya _______________________________________________ SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list sr-users(a)lists.sip-router.org <mailto:sr-users@lists.sip-router.org> http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users -- Daniel-Constantin Mierla http://twitter.com/#!/miconda - http://www.linkedin.com/in/miconda Book: SIP Routing With Kamailio - http://www.asipto.com http://miconda.eu _______________________________________________ SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list sr-users(a)lists.sip-router.org <mailto:sr-users@lists.sip-router.org> http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users