Hi Bogdan,
This is nice to know. However I think it would be easier if someone could control the pinging from script. Maybe a new module parameter that could substitue ping_nated_only with the following values: 0 : ping all contacts 1 : ping contacts with nat flag on 2 : ping contacts with sipping_bflag on
just my 2c. Thank you
George
-----Original Message----- From: Bogdan-Andrei Iancu [mailto:bogdan@voice-system.ro] Sent: Tuesday, October 23, 2007 11:41 AM To: Papadopoulos Georgios Cc: users@openser.org Subject: Re: [OpenSER-Users] question about nat pinging
Hi George,
There is in 1.3 a new MI function for controlling natpings. See nh_enable_ping : http://www.openser.org/docs/modules/1.3.x/nathelper.html#AEN432
Regards, Bogdan
Papadopoulos Georgios wrote:
Hello all,
I am trying to find a way to turn off nat pinging from
Openser during
runtime. Here is the problem: openser1 replicates registrations to openser2 which is working as a stand-by. Openser1 sends
OPTIONS pings
to all nated clients. When either of the two servers receive a replicated REGISTER, it saves it without setting the
sipping_bflag. So
openser2 will not send unecessary OPTIONS pings. However openser2 sends 4 byte pings to all nated clients. Is there any way
to turn off
these pings?
thank you
George
Disclaimer
The information in this e-mail and any attachments is
confidential. It
is intended solely for the attention and use of the named addressee(s). If you are not the intended recipient, or person responsible for delivering this information to the intended
recipient,
please notify the sender immediately. Unless you are the intended recipient or his/her representative you are not authorized to, and must not, read, copy, distribute, use or retain this message or any part of it. E-mail transmission cannot be guaranteed to be
secure or
error-free as information could be intercepted, corrupted, lost, destroyed, arrive late or incomplete, or contain viruses.
--
Users mailing list Users@openser.org http://openser.org/cgi-bin/mailman/listinfo/users