Re: [Serusers] SER + Linksys SPA942 + Call transfer

Hi there! After SPA942(transfer agent) sent REFER to SER, SER does not send a NOTIFY to SPA942(transfer agent). What's causes this? Can anyone tell me. Thanks. Cheers, Roa Yu :) -----Original Message----- From: serusers-bounces(a)lists.iptel.org [mailto:serusers-bounces@lists.iptel.org] On Behalf Of roayu Sent: Thursday, October 11, 2007 4:34 PM To: Atle Samuelsen Cc: serusers(a)lists.iptel.org Subject: Re: [Serusers] SER + Linksys SPA942 + Call transfer Hi Atle, Let me make my scenario clear on you. I have 2 softphone and 1 IP phone(SPA942). I would like to call from Softphone A to SPA942, then use SPA942 transfer the call to Softphone B. But, when I do so, the connection still remained on between SPA942 and Softphone B. I managed to get Softphone A onHold and the SPA942 managed to call to Softphone B. Once I press on the 'xfer' button after calling Softphone B, A still onHold and no SIP signal to unHold A and to terminate B. If I would like to configure the ser.cfg file, which part that I need to configure? And how do I do that? Thanks. Cheers, Roa Yu -----Original Message----- From: Atle Samuelsen [mailto:clona@cyberhouse.no] Sent: Thursday, October 11, 2007 3:19 PM To: roayu Cc: serusers(a)lists.iptel.org Subject: Re: [Serusers] SER + Linksys SPA942 + Call transfer Hi Roa,i * roayu <roayu(a)ctisys.net> [071011 04:01]: the I'm proberbly only tierd (9:15 am here) but P2P? Can you provide the signalling and ser.cfg so we can understand what you are trying to establish? I personally think you are trying to do a call transfer from one ua to a other, where the original call went true mediaproxy, but you do not want the "new" transferd call to go true it. SPA942, SPA962, SPA2102, yea.. all Linksys SPA products work like a charm with SER (Who has a 942 as his primary phone these days) Best Regards ATle _______________________________________________ Serusers mailing list Serusers(a)lists.iptel.org http://lists.iptel.org/mailman/listinfo/serusers