Turns out it did create the module, just did not copy it over ?
It was cpl-c..
make[1]: Entering directory
`/root/ser-cvs/sip_router/modules/cpl-c'
Still got some other issues but I know about those... Hopefully.
Thanks...
-----Original Message----- From: Richard [mailto:mypop3mail@yahoo.com] Sent: Wednesday 19 May 2004 21:04 To: steve Cc: serusers@lists.iptel.org Subject: RE: [Serusers] CPL cvs
Just update cvs, don't have the same problem.
Looks like your error came from cpl module, not cpl-c.
Make sure that you use cpl-c.
--- steve sgsubs@intechnology.co.uk wrote:
The compile and install did not seem to go to well with the
latest off
the CVS.
There seems to be a problem with compiling the cpl-c module, I see this on the compile:
make[1]: Entering directory `/root/ser-cvs/sip_router/modules/cpl-c' ../../Makefile.rules:77: cpl.d: No such file or directory ../../Makefile.rules:77: cpl_db.d: No such file or directory ../../Makefile.rules:77: cpl_loader.d: No such file or directory ../../Makefile.rules:77: cpl_log.d: No such file or directory ../../Makefile.rules:77: cpl_nonsig.d: No such file or directory ../../Makefile.rules:77: cpl_parser.d: No such file or directory ../../Makefile.rules:77: cpl_run.d: No such file or directory ../../Makefile.rules:77: cpl_sig.d: No such file or directory ../../Makefile.rules:77: cpl_time.d: No such file or directory ../../Makefile.rules:77: sub_list.d: No such file or directory make[1]: Leaving directory `/root/ser-cvs/sip_router/modules/cpl-c' make[1]: Entering directory `/root/ser-cvs/sip_router/modules/cpl-c'
Then this on the install. (Did not catch the compile errors until after the install attempt)
cpl.c: In function `cpl_run_script': cpl.c:118: `sock_info' undeclared (first use in this function) cpl.c:118: (Each undeclared identifier is reported only once cpl.c:118: for each function it appears in.) cpl.c: In function `cpl_update_contact': cpl.c:204: warning: implicit declaration of function
`build_lump_rpl'
cpl.c:204: warning: assignment makes pointer from integer without a cast cpl.c:211: warning: passing arg 2 of `add_lump_rpl' from incompatible pointer type cpl.c:211: too few arguments to function `add_lump_rpl' make[1]: *** [cpl.o] Error 1 make[1]: Leaving directory `/root/ser-cvs/sip_router/modules/cpl'
Anyone else seen those problems?
-----Original Message----- From: Bogdan-Andrei IANCU
[mailto:iancu@fokus.fraunhofer.de]
Sent: Wednesday 19 May 2004 20:07 To: steve Cc: 'Avkash'; 'Richard'; serusers@lists.iptel.org Subject: Re: [Serusers] unconditional forwarding
cpl script
Hi,
if you are using the CVS HEAD of whole ser, you
don't need
any patch - everything complies.
Bogdan
steve wrote:
Hi, I am also just trying to add the cpl-c module.
One thing I have seen in my research is this:
"you are using 0.8.12 release. In that release,
cpl-c is not fully
supported - in order to make it work, you have to
apply a
patch to tm
module (the patch is in modules/cpl-c/tm.patch).
I'm not sure if the
patch still works - there were some changes in
the code and the
patching can fail."
I am trying this as I write this, I will let you
know how I get on..
-----Original Message----- From: serusers-bounces@lists.iptel.org [mailto:serusers-bounces@lists.iptel.org] On Behalf Of
Avkash
Sent: Wednesday 19 May 2004 19:33 To: Richard Cc: serusers@lists.iptel.org Subject: Re: [Serusers] unconditional forwarding
cpl script
Hello all,
I tried to run SER 0.8.12 on Redhat Linux 9 but
i couldnt
even make it
executable. Every time i run it. it gives me
error as below:
--------------- ERROR
0(12455) loading module
/usr/local/lib/ser/modules/mysql.so
0(12455) loading module
/usr/local/lib/ser/modules/sl.so
0(12455) loading module
/usr/local/lib/ser/modules/tm.so
0(12455) ERROR: load_module: could not open
module
</usr/local/lib/ser/modules/tm.so>: /usr/local/l ib/ser/modules/tm.so: undefined symbol:
run_failure_handlers
-------------- END ERROR
Most of you guys have successfully installed SER
with C-CPL and
running it. Please help me with step by step
direction so
that i can
make it work for me.
Note1: I have also downloaded SER form CVS and
then
compiled it then
execute it. The error is same.
Note2:I have also downloaded SER from CVS HEAD
and then
compiled and
then execute. Error is still there.
Am i choosing wrokg version of RedHat or do i
need to do something
else to make it work. Please help me!!
Thanks in advance!!
-- Avkash Chauhan
Serusers mailing list serusers@lists.iptel.org http://lists.iptel.org/mailman/listinfo/serusers
This message has been checked for all known
viruses by the
CitC Virus
Scanning Service powered by SkyLabs. For further
information visit
Serusers mailing list serusers@lists.iptel.org http://lists.iptel.org/mailman/listinfo/serusers
This message has been checked for all known
viruses by the
CitC Virus Scanning Service powered by SkyLabs.
For further
information visit http://www.citc.it
=== message truncated ===
Do You Yahoo!? Tired of spam? Yahoo! Mail has the best spam protection around http://mail.yahoo.com
This message has been checked for all known viruses by the CitC Virus Scanning Service powered by SkyLabs. For further information visit http://www.citc.it