[Serusers] Small bug in dictionary.ser / RADIUS enabled acc module

Hi there I'm trying the acc module with RADIUS support (SER 0.8.14) and found a small bug. my apologise if it is already known or fixed on current CVS this module seems to use modules/acc/etc/sip_dictionary which has one attribute that is not present on ser/dictionary.ser VALUE Acct-Status-Type Failed 15 modules/acc/etc/sip_dictionary seems to unify dictionary.ser and radiusclient/dictionary.sip (*) without the Failed value present on radiusclient/dictionary, SER couldn't initialize with the following error # ser -ddd -E -P /var/run/ser.pid [...] 0(17650) ERROR: acc: can't get code for the Failed attribute value 0(17650) init_mod(): Error while initializing module acc ERROR: error while initializing modules [...] to trigger the bug, edit modules/acc/Makefile and uncomment the following lines # uncomment the next two lines if you wish to enable RADIUS accounting DEFS+=-DRAD_ACC -I$(LOCALBASE)/include LIBS=-L$(LOCALBASE)/lib -lradiusclient recompile SER and run it with the following in ser.cfg --- start --- loadmodule "/usr/lib/ser/modules/tm.so" loadmodule "/usr/lib/ser/modules/auth.so" loadmodule "/usr/lib/ser/modules/auth_radius.so" loadmodule "/usr/lib/ser/modules/acc.so" modparam("acc", "radius_config", "/etc/radiusclient/radiusclient.conf") modparam("acc", "radius_flag", 1) modparam("acc", "radius_missed_flag", 1) --- end --- Cheers !3runo (*) side note: the RADIUS instructions at iptel.org tells to cat dictionary.ser >> radiusclient/dictionary to be able to use RADIUS with SER. I found that cat radiusclient/dictionary.sip >> radiusclient/dictionary is also necessary (at least with libradiusclient 0.4.5). this doesn't seem to be documented anywhere I could find