6 Feb
2015
6 Feb
'15
11:38 a.m.
Btw, there is no 'debug' message -- have you set debug=3?
Daniel
On 06/02/15 10:26, Daniel-Constantin Mierla wrote:
Hello,
the log doesn't show the messages from the INVITE to the BYE. Are you
sure you got them for the entire call? There are notes from syslog
that there are rate limits, dropping logs.
Also, I noticed errors printed by t_check_trans(), are you using it
from a branch_route? Eventually you can send the config to me to
figure out from where the issues for error log messages are coming.
Cheers,
Daniel
On 05/02/15 23:54, SamyGo wrote:
--
Daniel-Constantin Mierla
http://twitter.com/#!/miconda - http://www.linkedin.com/in/miconda
Kamailio World Conference, May 27-29, 2015
Berlin, Germany - http://www.kamailioworld.com
Hi Daniel,
Thanks alot for your time, please see the log file attached.
If needed, I can provide sip captures received at the phone .
Thanks,
On Thu, Feb 5, 2015 at 4:42 PM, Daniel-Constantin Mierla
<miconda(a)gmail.com <mailto:miconda@gmail.com>> wrote:
Hello,
can you reproduce this with three phones (not to get too much
traffic)? Use debug=3 in kamailio.cfg and send to me all the logs
from kamailio start. I will look to see what happens.
Cheers,
Daniel
On 05/02/15 22:21, SamyGo wrote:
--
Daniel-Constantin Mierla
http://twitter.com/#!/miconda - http://www.linkedin.com/in/miconda
Kamailio World Conference, May 27-29, 2015
Berlin, Germany - http://www.kamailioworld.com Hi community,
I'm dealing with a problem here related to presence module
handling BLF. My BLF phones are Yealink T28p with latest
firmware and work perfectly with Asterisk and FreeSwitch but not
with Kamailio as expected.
What I'm observing here is a malfunctioning statuses due to
accumulation of multiple entries of just one status in
"presentitiy" table. These entries neither get expired not
cleared from DB hence I see atleast 21 XML tags combined in the
NOTIFY sent to Phones.
Here is what I've figured out a manual way to make the BLF work
fine again.
*Step -1* Make call between two endpoints. see entries in
presentitiy table showing up.
*Step -2* NOTIFYs sent to phones subscribing those users from
Kamailio and phones show correct flashing red BLF lights
*Step -3* clear the entries from presentity table manually i.e
mysql> truncate presentity;
*Step -4* Hangup the phones, presentity table shows few more
entries with state='terminated' NOTIFY sent again to
subscribers.. BLF lighst turn green happily.
Here are my module params:
modparam("presence", "db_url", DBURL)
modparam("presence", "notifier_processes", 1)
modparam("presence", "server_address", "sip:1.2.5.5" )
modparam("presence", "send_fast_notify", 0)
modparam("presence", "db_update_period", 1)
modparam("presence", "clean_period", 4)
modparam("presence", "subs_db_mode", 2)
modparam("presence", "max_expires", 36)
modparam("presence", "expires_offset", 10)
modparam("presence", "subs_htable_size", 12)
modparam("presence", "pres_htable_size", 12)
modparam("presence", "fetch_rows", 1000)
(these params were set as default earlier but I changed them as
above hoping they'll help)
Kindly share your expert opinion.
Best Regards,
Sammy
_______________________________________________
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
sr-users(a)lists.sip-router.org <mailto:sr-users@lists.sip-router.org>
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
--
Daniel-Constantin Mierla
http://twitter.com/#!/miconda <http://twitter.com/#%21/miconda> -
http://www.linkedin.com/in/miconda
Kamailio World Conference, May 27-29, 2015
Berlin, Germany - http://www.kamailioworld.com
_______________________________________________
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users
mailing list
sr-users(a)lists.sip-router.org <mailto:sr-users@lists.sip-router.org>
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users